Plastic Fuel Tanks
Outlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., gal. | Wd. | Dp. | Ht. | Thick. | Fill Opening Dia. | Color | Pipe Size | Gender | Seal Material | Max. Temp., °F | Specifications Met | UV Protection | Features | Includes | Each | |
Polyethylene Plastic | ||||||||||||||||
| 12 | 24" | 18" | 11 5/8" | 3/16" | 1 3/4" | Red | 1/4 NPT | Female | Nitrile Rubber | 140° | CARB Compliant 13 CCR 2850-2869 | UV Resistant | Fuel Level Gauge | Fill Cap | 0000000 | 0000000 |
Double-Wall Plastic Tanks
No need for separate spill-control pallets or trays—comply with EPA regulations for storing hazardous liquids with just one tank. These tanks have two walls, so if the primary compartment ruptures, the secondary one will contain the leak. It can hold 110% of the primary tank's volume and will also protect it from damage in case of impact.
Made of polyethylene, these tanks can store a broader range of chemicals than steel double-wall tanks. The plastic contains UV inhibitors so they can be used outside.
These tanks have a flat space on top where you can mount a metering pump. Because these tanks meet NSF/ANSI 61 for drinking water, you can meter chemicals stored in them into your drinking water system.
| Cap., gal. | Wd. | Dp. | Ht. | Primary Compartment Opening (No. of) | Secondary Compartment Opening (No. of) | Color | Max. Temp., °F | Specifications Met | Includes | Each | |
Polyethylene Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 14" | 14" | 22" | 4" Fill Opening Dia. (1) 3/8" Opening Dia. (1) 2 NPT Female Opening (1) | 1 NPT Female Opening (1) | Blue | 130° | EPA 40 CFR 264.175 NSF/ANSI 61 | Vented Fill Cap | 0000000 | 0000000 |
| 20 | 18" | 18" | 24" | 8" Fill Opening Dia. (1) 3/8" Opening Dia. (1) 2 NPT Female Opening (2) | 1 NPT Female Opening (1) | Blue | 130° | EPA 40 CFR 264.175 NSF/ANSI 61 | Vented Fill Cap | 0000000 | 000000 |
| 40 | 20" | 20" | 38" | 8" Fill Opening Dia. (1) 3/8" Opening Dia. (1) 2 NPT Female Opening (2) | 1 NPT Female Opening (1) | Blue | 130° | EPA 40 CFR 264.175 NSF/ANSI 61 | Vented Fill Cap | 0000000 | 00000000 |
| 70 | 24" | 24" | 41" | 8" Fill Opening Dia. (1) 3/8" Opening Dia. (1) 2 NPT Female Opening (2) | 1 NPT Female Opening (1) | Blue | 130° | EPA 40 CFR 264.175 NSF/ANSI 61 | Vented Fill Cap | 0000000 | 00000000 |
Safety Cans
Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.
Polyethylene plastic cans won't rust, dent, or pit and are for chemicals and corrosives.
| Style | Cap. | Dia. | Lg. | Wd. | Ht. | Fill Opening Dia. | Specifications Met | Color | Each | |
| F | 64 fl. oz. | __ | 7 3/4" | 4 3/4" | 9 1/2" | 1 5/8" | FM Approved | Red | 0000000 | 000000 |
| F | 1 gal. | __ | 7 3/4" | 4 3/4" | 12 3/4" | 1 5/8" | FM Approved | Red | 0000000 | 000000 |
| G | 2 1/2 gal. | 10 3/4" | __ | __ | 14 1/4" | 1 5/8" | UL Listed, FM Approved | Red | 0000000 | 000000 |
| G | 5 gal. | 12 3/4" | __ | __ | 16" | 1 5/8" | UL Listed, FM Approved | Red | 0000000 | 000000 |
Safety Cans with Faucet
A self-closing faucet provides controlled, one-handed dispensing of flammable liquids. These safety cans also have a flame arrester and a self-closing pressure-relief cap.
Polyethylene plastic cans are for chemicals and corrosives.
Faucet | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., gal. | Dia. | Ht. | Fill Opening Dia. | Material | Outlet Thread Size | Outlet Thread Type | Seal Material | Specifications Met | Flammability Rating | Color | Each | |
Polyethylene Plastic | ||||||||||||
| 5 | 13 1/2" | 17" | 1 1/2" | Brass | 1/2"-20 | UNF | PTFE Plastic | FM Approved, NFPA 30 | OSHA Compliant 29 CFR 1910.106 | Red | 0000000 | 0000000 |
Safety Cans with Stand
Tip cans down for controlled dispensing, then swing them back to their upright position. These cans have a pressure-relief cap with built-in vacuum-release valve for controlled pouring.
Polyethylene plastic can is for chemicals and corrosives.
Faucet | Base | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., gal. | Dia. | Ht. | Fill Opening Dia. | Material | Outlet Thread Size | Outlet Thread Type | Seal Material | Lg. | Wd. | Ht. | Material | Specifications Met | Color | Each | |
Polyethylene Plastic | |||||||||||||||
| 5 | 13 1/2" | 17" | 1 1/2" | Brass | 1/2"-20 | UNF | PTFE Plastic | 15 3/4" | 15 3/4" | 11 3/4" | Steel | OSHA Compliant 29 CFR 1910.106, FM Approved, NFPA 30 | Red | 0000000 | 0000000 |
Fuel Cans
Carry and store petroleum-based liquids in these sturdy cans. Color-coding indicates usage: red for gasoline, yellow for diesel, and blue for kerosene. The spout automatically closes to prevent spills. Push the button to pour.
Fuel Cans | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Replacement Spouts | |||||||||||||
| Style | Cap., gal. | Lg. | Wd. | Ht. | Fill Opening Dia. | Lg. | OD | Flexibility | Specifications Met | Color | Each | Each | ||
For Gasoline | ||||||||||||||
Polyethylene Plastic | ||||||||||||||
| A | 1 | 8 1/8" | 5 7/8" | 8" | 1 5/8" | 5" | 1 3/8" | Rigid | CARB Compliant EO G-18-082, EPA 40 CFR 59 | Red | 0000000 | 000000 | 0000000 | 000000 |
| A | 2 | 9 7/8" | 7 1/8" | 10" | 1 5/8" | 5" | 1 3/8" | Rigid | CARB Compliant EO G-18-082, EPA 40 CFR 59 | Red | 0000000 | 00000 | 0000000 | 00000 |
| A | 5 | 14 3/4" | 10 1/8" | 15 3/8" | 1 5/8" | 5" | 1 3/8" | Rigid | CARB Compliant EO G-18-082, EPA 40 CFR 59 | Red | 0000000 | 00000 | 0000000 | 00000 |
For Diesel | ||||||||||||||
Polyethylene Plastic | ||||||||||||||
| A | 5 | 14 3/4" | 10 1/8" | 15 3/8" | 1 5/8" | 5" | 1 3/8" | Rigid | CARB Compliant EO G-18-082, EPA 40 CFR 59 | Yellow | 0000000 | 00000 | 0000000 | 00000 |
For Kerosene | ||||||||||||||
Polyethylene Plastic | ||||||||||||||
| A | 5 | 14 3/4" | 10 1/8" | 15 3/8" | 1 5/8" | 5" | 1 3/8" | Rigid | CARB Compliant EO G-18-082, EPA 40 CFR 59 | Blue | 0000000 | 00000 | 0000000 | 00000 |
Mobile Fuel Dispensers
Wheel | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For Fuel Type | Cap., gal. | Flow Rate, gpm | Lg. | Wd. | Ht. | Fill Opening Dia. | Nozzle OD | Hose Lg., ft. | Color | Material | Material | Type | Specifications Met | UN Shipping Standard | Each | |
Gravity Fed | |||||||||||||||||
| A | Gasoline | 14 | 2 | 11" | 17" | 34" | 1 3/4" | 1" | 10 | Red | Plastic | Plastic | Solid | UN3H1/Y/130 | __ | 00000000 | 0000000 |
| B | Gasoline | 25 | 2 | 17" | 22" | 43" | 2" | 3/4" | 8 | Red | Plastic | Rubber | Pneumatic | UN3H1W/Y1.2/110 | UN3H1 | 00000000 | 000000 |
| B | Diesel | 25 | 2 | 17" | 22" | 43" | 2" | 3/4" | 8 | Yellow | Plastic | Rubber | Pneumatic | UN3H1W/Y1.2/110 | UN3H1 | 00000000 | 000000 |