McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    33 Products

    T-Handle Tap Wrenches

    Use with a tap to thread holes by hand. These wrenches are more compact than straight-handle tap wrenches, so they can be used to tap in tighter spaces. However, they provide less leverage.
    Tap Wrenches with Aligner
    Image of Product. Front orientation. Contains Annotated. Tap Wrenches with Aligner. T-Handle Tap Wrenches.
    Wrenches with aligner square your tap to your work surface for proper alignment and reduced tap breakage. A V-groove at the base provides stability on round surfaces.
    Tap Wrench
    Jaws Sets
    For Tap Size
    For Square
    Shank Size
    Lg.
    Includes
    Material
    Each
    Each
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 15/32", 1/2", M1.6, M1.8, M2, M2.2, M2.5, M3, M3.5, M4, M4.5, M5, M6, M6.3, M7, M8, M9, M10, M11, M12, M12.50.11" to 0.275"4 1/4"AlignerSteel00000000000000000000000000
     
    Machine-Mount Tap Wrenches
    Image of Attribute. Front orientation. Machine-Mount Tap Wrenches. T-Handle Tap Wrenches.

    Machine-mount wrenches have a guide shank that fits into the chuck on your drill press and holds the tap steady. Use them after drilling to thread holes manually without moving the workpiece.
    Sliding Handle—Sliding handle moves from side to side to allow tapping in spaces where fixed handles don't have room to turn.
    For Tap Size
    For Tap Pipe
    Size
    For Square
    Shank Size
    Lg.
    Includes
    Material
    Each
    Sliding Handle
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", M1.6, M2, M2.5, M3, M3.5, M4, M4.5, M5, M6—0.11" to 0.191"3 1/2"Guide with 1/2" dia. shankSteel0000000000000
    1/4", 5/16", 3/8", 7/16", 1/2", M6, M7, M8, M10, M121/16, 1/80.191" to 0.275"4"Guide with 1/2" dia. shankSteel000000000000
    1/2", 9/16", 5/8", 11/16", 3/4", M12, M12.5, M14, M15, M16, M18, M191/16, 1/80.275" to 0.442"4 1/4"Guide with 5/8" dia. shankSteel000000000000
    3/4", 13/16", 7/8", 15/16", 1", M19, M20, M22, M22.5, M24, M251/4
    		0.442" to 0.6"5"Guide with 3/4" dia. shankSteel0000000000000
     

    Mounted Tap Wrenches

    Image of Product. Front orientation. Contains Annotated. Tap Wrenches. Mounted Tap Wrenches, 8 1/2" Long Base.
    Image of Product. Front orientation. Contains Annotated. Tap Wrenches. Mounted Tap Wrenches, 13" Long Base.

    8 1/2" Long Base

    13" Long Base

    Also known as hand tappers, these wrenches mount to a flat surface for stability and guide the tap straight into the hole for accurate threading.
    Base
    For Tap Size
    Lg.
    Wd.
    Throat
    Dp.
    Clearance
    Over Base
    Overall
    Ht.
    Includes
    Material
    Each
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, No. 12, 1/4", 5/16"8 1/2"6"4 1/2"3 3/4"9"Seven Holders, Spindle Wrench, Tap Guide, Work TableSteel00000000000000
    No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"13"8"7 1/2"7"14"Nine Holders, Removable Spindle Wrench, Tap Guide, Work TableSteel0000000000000
     

    Tap Guides

    Image of Product. Front orientation. Tap Guides.
    Place on your workpiece to ensure straight, accurate threading without building a fixture.
    For Tap Size
    For Tap Type
    For Thread
    Type
    Lg.
    Wd.
    Ht.
    Material
    Each
    No. 0, No. 1, No. 2, No. 3, No. 4, No. 5, No. 6, No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"Standard (UN)UN
    		4 5/8"1"7/8"Steel0000000000000
    No. 6, No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16"HelicalUNC
    		4 3/4"1 1/8"7/8"Steel000000000000
    No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8"HelicalUNF
    		5"1 1/8"7/8"Steel000000000000
    M1.6, M2, M2.5, M3, M3.5, M4, M5, M6, M8, M10, M12, M14, M16MetricMetric
    		4 5/8"1"7/8"Steel000000000000

    Drill Bit Guides

    Image of Product. Front orientation. Drill Bit Guides.
    Place on your workpiece to drill precise holes without building a fixture.
    For Drill Bit Size
    For Drill Bit Size Decimal Equiv.
    Lg.
    Wd.
    Ht.
    Material
    Each
    3/64", 1/16", 5/64", 3/32", 7/64", 1/8", 10 Ga., 21 Ga., 25 Ga., 29 Ga., 30 Ga., 33 Ga., 36 Ga., 37 Ga., 38 Ga., 40 Ga., 43 Ga., 45 Ga., 47 Ga., 50 Ga., 53 Ga.0.0469", 0.0595", 0.0625", 0.07", 0.0781", 0.0785", 0.082", 0.089", 0.0938", 0.098", 0.1015", 0.104", 0.1065", 0.1094", 0.113", 0.125", 0.128", 0.136", 0.1495", 0.159", 0.1935"3 5/8"5/8"1/2"Steel0000000000000
    1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8"0.125", 0.1406", 0.1563", 0.1719", 0.1875", 0.2031", 0.2188", 0.2344", 0.25", 0.2656", 0.2813", 0.2969", 0.3125", 0.3281", 0.3438", 0.3594", 0.375"5 1/2"3/4"7/8"Steel000000000000
    3/8", 25/64", 13/32", 7/16", 29/64", 15/32", 31/64", 1/2", 37/64"0.375", 0.3906", 0.4063", 0.4219", 0.4375", 0.4531", 0.4688", 0.4844", 0.5"5 1/4"1"7/8"Steel000000000000
    3 mm, 3.3 mm, 3.5 mm, 4 mm, 4.2 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 6.8 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm0.1181", 0.1299", 0.1378", 0.1575", 0.1654", 0.1772", 0.1968", 0.2165", 0.2362", 0.2559", 0.2677", 0.2756", 0.2953", 0.315", 0.3346", 0.3543", 0.374"5 1/2"3/4"7/8"Steel000000000000
    10 mm, 10.5 mm, 11 mm, 11.5 mm, 12 mm, 12.5 mm, 13 mm, 13.5 mm, 14 mm0.3937", 0.4134", 0.4331", 0.4528", 0.4724", 0.4921", 0.5118", 0.5315", 0.5512"5 1/4"1"1 5/8"Steel000000000000

    Clamp-On Drill Bit Guides

    Image of Product. Front orientation. Drill Bit Guides. Clamp-On Drill Bit Guides.
    Drill precise holes without building a fixture. Clamp the jig onto your material and lift and turn the turret to select the hole size you need. Use the graduations to set the jig to the centerline of your workpiece.
    For Drill Bit Size
    For Drill Bit Size Decimal Equiv.
    Max. Opening
    Wd.
    Lg.
    Wd.
    Ht.
    Material
    Each
    3/16", 1/4", 5/16", 3/8", 7/16", 1/2"0.1875", 0.25", 0.3125", 0.375", 0.4375", 0.5"4"7 1/8"3 1/2"2 1/8"Steel, Nylon0000000000000
    back to top