Tapered Silicone Plugs | McMaster-Carr

Filter by

Profile Shape

Material

System of Measurement

Color

Height

Attachment Type

Maximum Temperature

Shape

Number of Holes

Pipe Size

Performance

Hardness

For Hole Type

For Use With

Hole Diameter

Tapered Plug Trade Size

Flange Diameter

Head Diameter

RoHS

REACH

Export Control Classification Number (ECCN)

2B999

EAR99

DFARS Specialty Metals

Thread Type

Fastener Head Type

219 Products

Tapered Plugs

High-Temperature

Silicone Rubber,

0 Holes

Don't worry about having the exact size you need on hand—these plugs are shaped to fit a range of diameters. Push in until they're snug to mask holes during coating and finishing.

High-Temperature Silicone Rubber—Withstand multiple passes when paint baking, powder coating, and electroplating.

					0 Holes
	For ID	Ht.	Max. Temp., ° F	Color	Pkg. Qty.		Pkg.
High-Temperature Silicone Rubber



		1/32" to 3/64"	5/8"	570	Off-White	50	0000000	000000


		1/32" to 3/32"	1"	570	Red	50	00000000	0000
		1/32" to 1/8"	5/8"	570	Clear	50	0000000	0000
		3/64" to 1/16"	3/4"	570	Off-White	50	00000000	00000
		3/64" to 7/64"	5/8"	570	Clear	50	0000000	00000
		3/64" to 13/64"	1 1/8"	570	Clear	50	0000000	00000
		1/16" to 11/64"	3/4"	570	Red	50	00000000	00000
		1/16" to 13/64"	3/4"	570	Clear	50	0000000	00000
		5/64" to 7/64"	5/8"	570	Green	50	0000000	0000
		5/64" to 11/64"	5/8"	570	Pink	50	0000000	00000
		1/8" to 1/2"	2"	570	Red	10	00000000	00000


		9/64" to 15/64"	3/4"	570	Black	50	0000000	00000
		9/64" to 23/64"	1 1/4"	570	Red	25	0000000	00000
		13/64" to 21/64"	5/8"	570	Red	50	0000000	00000
		1/4" to 7/16"	1"	570	Red	50	00000000	00000
		17/64" to 23/64"	3/4"	570	Yellow	25	0000000	0000
		17/64" to 27/64"	1"	570	Clear	25	0000000	00000
		9/32" to 23/64"	3/4"	570	Clear	50	00000000	00000
		21/64" to 31/64"	13/16"	570	Clear	10	0000000	0000
		11/32" to 15/32"	3/4"	570	Clear	10	0000000	00000
		11/32" to 1/2"	13/16"	570	Clear	10	0000000	00000


		23/64" to 29/64"	13/16"	570	Clear	25	0000000	00000
		13/32" to 19/32"	1"	570	Red	25	00000000	00000
		27/64" to 37/64"	1"	570	Clear	25	0000000	00000
		29/64" to 39/64"	13/16"	570	Green	10	0000000	0000
		29/64" to 43/64"	1"	570	Clear	10	0000000	00000
		1/2" to 21/32"	1"	570	Pink	10	0000000	00000
		33/64" to 41/64"	1"	570	Red	25	0000000	00000
		37/64" to 47/64"	1"	570	Black	10	0000000	00000
		39/64" to 23/32"	1"	570	Off-White	10	00000000	00000
		41/64" to 49/64"	1"	570	Clear	10	0000000	00000


		41/64" to 51/64"	1"	570	Red	10	0000000	00000
		47/64" to 59/64"	1"	570	Yellow	10	0000000	00000
		3/4" to 1"	1"	570	Clear	5	0000000	00000
		49/64" to 29/32"	1"	570	Off-White	5	00000000	00000
		51/64" to 1"	1"	570	Clear	5	0000000	00000
		53/64" to 31/32"	1"	570	Off-White	5	0000000	00000
		29/32" to 1 1/16"	1"	570	Red	10	00000000	00000
		59/64" to 1 3/64"	1"	570	Clear	5	0000000	00000
		61/64" to 1 5/64"	1"	570	Clear	5	00000000	00000
		1 3/64" to 1 1/4"	1"	570	Green	5	0000000	00000


		1 1/16" to 1 21/64"	1"	570	Red	5	00000000	00000
		1 5/64" to 1 7/32"	1"	570	Off-White	5	0000000	00000
		1 3/16" to 1 7/16"	1"	570	Blue	2	0000000	0000
		1 19/64" to 1 1/2"	1"	570	Off-White	2	0000000	00000
		1 5/16" to 1 5/8"	1"	570	Clear	1	0000000	0000
		1 21/64" to 1 19/32"	1"	570	Clear	1	0000000	0000
		1 15/32" to 1 3/4"	1"	570	Red	1	0000000	0000
		1 31/64" to 1 3/4"	1"	570	Red	1	0000000	0000
		1 41/64" to 1 61/64"	1"	570	Clear	1	0000000	0000
		1 21/32" to 1 15/16"	1"	570	Clear	1	0000000	00000

1 13/16" to 2 1/64"	1"	570	Off-White	2	0000000	00000
1 57/64" to 2 3/16"	1"	570	Purple	1	0000000	0000
1 31/32" to 2 15/32"	1"	570	Clear	1	0000000	00000
1 63/64" to 2 15/32"	1"	570	Red	1	0000000	00000
2 9/64" to 2 1/2"	1"	570	Red	1	0000000	00000
2 5/16" to 2 21/32"	1"	570	Clear	1	00000000	00000
2 29/64" to 2 15/16"	1 3/8"	570	Red	1	0000000	00000
3 1/64" to 3 17/32"	1 1/2"	570	Red	1	0000000	00000
3 17/64" to 4 1/32"	1 1/2"	570	Red	1	0000000	00000
3 33/64" to 4 63/64"	2"	570	Red	1	0000000	00000

Hollow Tapered Plugs

A hollow construction makes these plugs extra flexible, so they compress for easy installation and a snug fit. The tapered profile fits a range of hole diameters. If you flip the plug over, it can be used as a cap.

High-Temperature Silicone Rubber—Withstand multiple passes when paint baking, powder coating, and electroplating.

	For Pipe Size	Ht.	Max. Temp., ° F	Color	Flange Dia.	Pkg. Qty.		Pkg.
High-Temperature Silicone Rubber



	0.116" to 0.182"	1/8	3/8"	450	Red	11/32"	10	0000000	00000


	0.24" to 0.295"	1/4	3/8"	450	Red	15/32"	10	0000000	0000
	0.325" to 0.367"	1/4	3/16"	450	Red	1/2"	10	0000000	0000
	0.361" to 0.418"	3/8	3/8"	450	Red	19/32"	10	0000000	0000
	0.471" to 0.536"	1/2	7/16"	450	Red	23/32"	10	0000000	0000
	0.58" to 0.667"	1/2	1/2"	450	Red	27/32"	10	0000000	0000
	0.64" to 0.727"	1/2	1/2"	450	Red	29/32"	10	0000000	0000
	0.69" to 0.788"	3/4	9/16"	450	Red	31/32"	10	0000000	0000
	0.802" to 0.911"	3/4	5/8"	450	Red	1 3/32"	10	0000000	0000
	0.866" to 0.975"	3/4	5/8"	450	Red	1 5/32"	10	0000000	0000
	0.964" to 1.09"	1	3/4"	450	Red	1 9/32"	10	000000	0000


	1.094" to 1.215"	1	3/4"	450	Red	1 7/16"	10	0000000	0000
	1.224" to 1.355"	1 1/4	3/4"	450	Red	1 17/32"	10	0000000	00000
	1.312" to 1.465"	1 1/4	7/8"	450	Red	1 21/32"	5	0000000	0000
	1.447" to 1.6"	1 1/2	7/8"	450	Red	1 25/32"	5	0000000	0000
	1.56" to 1.682"	1 1/2	3/4"	450	Red	1 29/32"	5	0000000	0000
	1 3/4" to 1.88"	1 1/2	3/4"	450	Red	2 1/32"	5	0000000	00000
	1.78" to 1.95"	1 1/2	1"	450	Red	2 5/32"	2	0000000	0000
	1.9" to 2.076"	2	1"	450	Red	2 9/32"	2	0000000	0000
	2.035" to 2.21"	2	1"	450	Red	2 3/8"	2	0000000	0000
	2.255" to 2.43"	2	1"	450	Red	2 19/32"	2	0000000	0000


	2.525" to 2.7"	2 1/2	1"	450	Red	2 27/32"	2	0000000	0000
	2.765" to 2.94"	2 1/2	1"	450	Red	3 3/32"	2	0000000	0000

Tapered Plugs for Food and Beverage

Nonporous and super smooth to prevent bacteria growth, these plugs are FDA compliant for use in food production. They’re often used as bottle stoppers to protect liquids from spills and contamination.

High-Temperature Silicone Rubber—Plugs can be autoclaved and sterilized without cracking or breaking down.

	Ht.	Trade Size	Max. Temp., ° F	Color	Specs. Met		Each
High-Temperature Silicone Rubber



	29/64" to 37/64"	1"	00	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	000000


	35/64" to 41/64"	1"	0	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000
	39/64" to 23/32"	1"	1	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000
	43/64" to 23/32"	1"	2	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000
	49/64" to 29/32"	1"	3	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000
	51/64" to 31/32"	1"	4	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000
	59/64" to 1"	1"	5	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000
	1 5/64" to 1 7/32"	1"	6	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000
	1 9/64" to 1 13/32"	1"	7	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000
	1 21/64" to 1 9/16"	1"	8	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000
	1 17/32" to 1 45/64"	1"	9	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000


	1 23/32" to 1 59/64"	1"	10	400	Semi-Clear White	FDA Compliant 21 CFR 177.2600, USP Class VI	00000000	00000

Tight-Hold Tapered Plugs

Tighten the wing nut to expand the sides of these plugs until they seal. They’ll stay securely in place until you loosen the nut. Plugs fit a range of diameters to seal containers or keep coatings out of holes.

High-Temperature Silicone Rubber—Withstand multiple passes when paint baking, powder coating, and electroplating.

	Ht.	Trade Size	Max. Temp., ° F	Color	Nut Material		Each
High-Temperature Silicone Rubber



	41/64" to 25/32"	1"	2	450	Orange	Stainless Steel	0000000	00000


	23/32" to 15/16"	1"	3	450	Orange	Stainless Steel	0000000	0000
	51/64" to 1 1/64"	1"	4	450	Clear	Stainless Steel	0000000	0000
	29/32" to 1 1/16"	1"	5	450	Clear	Stainless Steel	0000000	0000
	61/64" to 1 3/32"	1"	5 1/2	450	Clear	Stainless Steel	0000000	0000
	1 1/32" to 1 1/4"	1"	6	450	Clear	Stainless Steel	0000000	0000
	1 5/64" to 1 21/64"	1"	6 1/2	450	Clear	Stainless Steel	0000000	0000
	1 3/16" to 1 29/64"	1"	7	450	Orange	Stainless Steel	0000000	00000
	1 15/64" to 1 17/32"	1"	7 1/2	450	Clear	Stainless Steel	0000000	00000
	1 5/16" to 1 39/64"	1"	8	450	Clear	Stainless Steel	0000000	00000
	1 27/64" to 1 11/16"	1"	8 1/2	450	Clear	Stainless Steel	0000000	00000


	1 15/32" to 1 49/64"	1"	9	450	Clear	Stainless Steel	0000000	00000
	1 1/2" to 1 51/64"	1"	9 1/2	450	Clear	Stainless Steel	0000000	00000
	1 21/32" to 1 31/32"	1"	10	450	Orange	Stainless Steel	0000000	00000
	1 25/32" to 2 5/64"	1"	10 1/2	450	Clear	Stainless Steel	0000000	00000
	1 57/64" to 2 13/64"	1"	11	450	Clear	Stainless Steel	0000000	00000
	1 63/64" to 2 15/32"	1"	11 1/2	450	Clear	Stainless Steel	0000000	00000
	2 9/64" to 2 33/64"	1"	12	450	Clear	Stainless Steel	0000000	00000
	2 19/64" to 2 21/32"	1"	13	450	Clear	Stainless Steel	0000000	00000
	2 29/64" to 2 61/64"	1 3/8"	13 1/2	450	Clear	Stainless Steel	0000000	00000
	2 61/64" to 3 17/32"	1 17/32"	14	450	Clear	Stainless Steel	0000000	00000


	3 9/32" to 4 3/64"	1 17/32"	15	450	Clear	Stainless Steel	0000000	000000
	3 35/64" to 5"	1 31/32"	16	450	Clear	Stainless Steel	0000000	000000

Vented Plugs for Pipe and Tubing

Image of Product. Front orientation. Contains Annotated. Protective Plugs. For Pipe, For Round Holes, Vented, For Round Shapes, Push In.

Keep coatings out of female threaded pipe and release pressure while they cure. Push in these plugs and a rib holds them in place. Tear away the tab to vent.

High-Temperature Silicone Rubber—Withstand multiple passes when paint baking, powder coating, and electroplating.

	Max. Temp., ° F	Color	Pkg. Qty.		Pkg.
External Square Drive







	High-Temperature Silicone Rubber

	1/2	NPT	19/32"	600	Pink	10	0000000	000000


	3/4	NPT	19/32"	600	Yellow	10	0000000	00000
	1	NPT	11/16"	600	Clear	1	0000000	0000
	1 1/4	NPT	3/4"	600	Green	1	0000000	0000
	1 1/2	NPT	23/32"	600	White	1	0000000	0000
	2	NPT	23/32"	600	Blue	1	0000000	0000

Tapered Caps

Don't worry about having the exact size you need on hand. These caps are shaped to fit a range of ODs—just keep pushing on until they're snug. Because they make less contact with the parts they cover, they’re easier to remove than straight caps. In a pinch, you can flip tapered caps over and use them as plugs.

High-Temperature Silicone Rubber—Withstand multiple passes when paint baking, powder coating, and electroplating. Caps are flexible to conform to parts.

	For Pipe Size	Inside Ht.	Flexibility	Max. Temp., ° F	Color	Pkg. Qty.		Pkg.
High-Temperature Silicone Rubber



	0.111" to 0.177"	1/8	0.38"	Flexible	450	Red	10	0000000	00000


	0.235" to 0.302"	1/4	0.38"	Flexible	450	Red	10	0000000	0000
	0.356" to 0.422"	3/8	0.38"	Flexible	450	Red	10	0000000	0000
	0.468" to 0.545"	1/2	0.44"	Flexible	450	Red	10	0000000	0000
	0.687" to 0.785"	3/4	0.56"	Flexible	450	Red	10	0000000	0000
	0.901" to 1.027"	1	3/4"	Flexible	450	Red	10	0000000	0000

Miniature Pull-Through Plugs

Often used with electronic components such as circuit boards and connectors, these tiny plugs stretch the entire length of through holes. Grip the end of the plug and pull through to protect holes during finishing. Also known as mousetails.

High-Temperature Silicone Rubber—Withstand multiple passes when paint baking, powder coating, and electroplating.

	Ht.	Tab Ht.	Max. Temp., ° F	Color	Pkg. Qty.		Pkg.
High-Temperature Silicone Rubber



	0.022" to 0.079"	1 5/16"	21/32"	600	Clear	10	0000000	00000


	0.025" to 0.08"	2"	1/2"	600	Clear	10	0000000	0000
	0.03" to 0.083"	1 25/32"	7/8"	600	Clear	10	0000000	0000

Self-Draining Breather Vents

Minimize moisture buildup in enclosures. Also known as drain plugs, these breather vents have a small outlet that allows condensation to drain. They have a silicone O-ring above the threads for a tight seal. Install them at the lowest point of the enclosure. Breather vents meet IP66 for protection in washdown environments. Use them to prevent excess vacuum and pressure in cylinders, gear boxes, and tanks and to block debris from entering equipment.

Threaded NPT Male

Image of Product. Bottom orientation. Breather Vents. Self-Draining Breather Vents.

316 Stainless Steel Body and Fitting—316 stainless steel breather vents have excellent corrosion resistance.

Brass Body and Fitting—Brass breather vents have good corrosion resistance.

	Max. Flow Rate @ Pressure	Max. Pressure	Max. Temp., ° F	Ht.	Dia.	For Use With	Environment	Hazardous Location Protection Type	Enclosure Rating	Hazardous Location Rating	O-Ring Material	Certification	Features		Each
316 Stainless Steel Body and Fitting



	1/4	Not Rated	Not Rated	320	1 1/16"	11/16"	Air	Corrosive, Dusty, Outdoor, Washdown, Wet	—	IP66, NEMA 4X	—	Silicone Rubber	—	Drain	0000000	000000


	1/2	Not Rated	Not Rated	320	1 1/8"	1"	Air	Corrosive, Dusty, Hazardous, Outdoor, Washdown, Wet	Increased Safety, Protection by Enclosure	IP66, NEMA 4X	ATEX I M2 Ex E I Mb; ATEX II 2 GD Ex E IIC Gb Ex Tb IIIC Db; IEC Zone 1 Groups IIC, IIB, IIA; IEC Zone 21 Groups IIIC, IIIB, IIIA; IECEx Ex E I/IIC Mb/Gb; IECEx Ex IIIC Tb Db	Silicone Rubber	CE Marked	Drain	0000000	00000


	Brass Body and Fitting



			1/4	Not Rated	Not Rated	320	1 1/16"	11/16"	Air	Corrosive, Dusty, Outdoor, Washdown, Wet	—	IP66, NEMA 4X	—	Silicone Rubber	—	Drain	0000000	00000


			1/2	Not Rated	Not Rated	320	1 1/8"	1"	Air	Corrosive, Dusty, Hazardous, Outdoor, Washdown, Wet	Increased Safety, Protection by Enclosure	IP66, NEMA 4X	ATEX I M2 Ex E I Mb; ATEX II 2 GD Ex E IIC Gb Ex Tb IIIC Db; IEC Zone 1 Groups IIC, IIB, IIA; IEC Zone 21 Groups IIIC, IIIB, IIIA; IECEx Ex E I/IIC Mb/Gb; IECEx Ex IIIC Tb Db	Silicone Rubber	CE Marked	Drain	0000000	00000

Sealing Stainless Steel Phillips Flat Head Screws

Keep out dust and contaminants while locking in air and fluid. These screws have a rubber O-ring under the head that compresses to form a tight seal as you tighten them. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals. The Phillips drive has a cross-shaped opening in which a driver fits snugly for easy alignment. With four contact points, they withstand more torque than slotted drives, but drivers slip when you apply too much force.

These screws are reusable as long as the rubber O-ring is intact and undamaged. Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these screws won't degrade when exposed to harsh weather, salt water, and most chemicals.

Silicone Rubber O-Ring—Withstand a wider range of temperatures than Buna-N and Viton seals without becoming brittle. However, they degrade when exposed to oil, grease, and fuel.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

Undercut Profile—About a third thinner than standard heads, the undercut profile fits into shallow holes in thin material. The thin head also has more threading on the shaft, so they're often used to keep short screws from coming loose.

				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	For Max. Hole Dia.	O-Ring Temp. Range, ° F	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel with Silicone Rubber O-Ring







				2-56

				3/16"	82°	Standard	0.172"	0.035"	Fully Threaded	70,000	0.095"	-150 to 500	—	10	000000000	000000


				3/16"	100°	Undercut	0.172"	0.035"	Fully Threaded	70,000	0.095"	-80 to 400	—	10	000000000	00000
				1/4"	82°	Standard	0.172"	0.035"	Fully Threaded	70,000	0.095"	-150 to 500	—	10	000000000	00000
				1/4"	100°	Undercut	0.172"	0.035"	Fully Threaded	70,000	0.095"	-80 to 400	—	10	000000000	00000
				3/8"	82°	Standard	0.172"	0.035"	Fully Threaded	70,000	0.095"	-150 to 500	—	10	000000000	00000
				3/8"	100°	Undercut	0.172"	0.035"	Fully Threaded	70,000	0.095"	-80 to 400	—	10	000000000	0000




						4-40

						3/16"	100°	Standard	0.225"	0.034"	Fully Threaded	70,000	0.129"	-150 to 500	—	10	000000000	0000


						1/4"	100°	Standard	0.225"	0.038"	Fully Threaded	70,000	0.129"	-150 to 500	—	10	000000000	0000
						5/16"	100°	Standard	0.225"	0.039"	Fully Threaded	70,000	0.129"	-150 to 500	—	10	000000000	0000
						3/8"	100°	Standard	0.225"	0.039"	Fully Threaded	70,000	0.129"	-150 to 500	—	10	000000000	0000
						1/2"	100°	Standard	0.225"	0.037"	Fully Threaded	70,000	0.129"	-150 to 500	—	10	000000000	0000
						5/8"	100°	Undercut	0.224"	0.033"	Fully Threaded	70,000	0.129"	-80 to 400	—	10	000000000	0000
						3/4"	100°	Undercut	0.224"	0.033"	Fully Threaded	70,000	0.129"	-80 to 400	—	10	000000000	0000




								6-32

								1/4"	100°	Standard	0.279"	0.038"	Fully Threaded	70,000	0.152"	-150 to 500	—	10	000000000	0000


								5/16"	100°	Standard	0.279"	0.038"	Fully Threaded	70,000	0.152"	-150 to 500	—	10	000000000	0000
								3/8"	100°	Standard	0.279"	0.038"	Fully Threaded	70,000	0.152"	-150 to 500	—	10	000000000	0000
								1/2"	100°	Standard	0.279"	0.038"	Fully Threaded	70,000	0.152"	-150 to 500	—	10	000000000	0000
								5/8"	100°	Standard	0.279"	0.038"	Fully Threaded	70,000	0.152"	-150 to 500	—	10	000000000	00000
								3/4"	100°	Standard	0.279"	0.038"	Fully Threaded	70,000	0.152"	-150 to 500	—	10	000000000	0000




										8-32

										1/4"	100°	Standard	0.332"	0.048"	Fully Threaded	70,000	0.179"	-150 to 500	—	10	000000000	0000


										3/8"	100°	Standard	0.332"	0.048"	Fully Threaded	70,000	0.179"	-150 to 500	—	10	000000000	0000
										7/16"	100°	Undercut	0.332"	0.048"	Fully Threaded	70,000	0.179"	-80 to 400	—	10	000000000	0000
										1/2"	100°	Standard	0.332"	0.048"	Fully Threaded	70,000	0.179"	-150 to 500	—	10	000000000	0000
										9/16"	100°	Undercut	0.332"	0.048"	Fully Threaded	70,000	0.179"	-80 to 400	—	10	000000000	0000
										5/8"	100°	Standard	0.332"	0.048"	Fully Threaded	70,000	0.179"	-150 to 500	—	10	000000000	00000
										3/4"	100°	Standard	0.332"	0.048"	Fully Threaded	70,000	0.179"	-150 to 500	—	10	000000000	0000




	10-24

	1/2"										100°	Standard	0.385"	0.053"	Fully Threaded	70,000	0.204"	-150 to 500	—	10	000000000	00000


	3/4"	100°									Standard	0.385"	0.053"	Fully Threaded	70,000	0.204"	-150 to 500	—	10	000000000	00000




			10-32

			3/8"								100°	Undercut	0.385"	0.053"	Fully Threaded	70,000	0.204"	-80 to 400	—	10	000000000	00000


			1/2"								100°	Standard	0.385"	0.053"	Fully Threaded	70,000	0.204"	-150 to 500	—	10	000000000	0000
			5/8"								100°	Undercut	0.385"	0.053"	Fully Threaded	70,000	0.204"	-80 to 400	—	10	000000000	00000
			3/4"								100°	Undercut	0.385"	0.053"	Fully Threaded	70,000	0.204"	-80 to 400	—	10	000000000	00000
			1"								100°	Standard	0.385"	0.053"	Fully Threaded	70,000	0.204"	-150 to 500	—	10	000000000	00000




					1/4"-20

					3/8"						100°	Undercut	0.507"	0.073"	Fully Threaded	70,000	0.265"	-80 to 400	—	5	000000000	00000


					1/2"						100°	Undercut	0.507"	0.073"	Fully Threaded	70,000	0.265"	-80 to 400	—	5	000000000	00000
					5/8"						100°	Undercut	0.507"	0.073"	Fully Threaded	70,000	0.265"	-80 to 400	—	5	000000000	00000
					3/4"						100°	Undercut	0.507"	0.073"	Fully Threaded	70,000	0.265"	-80 to 400	—	5	000000000	00000
					1"						100°	Undercut	0.507"	0.073"	Fully Threaded	70,000	0.265"	-80 to 400	—	5	000000000	00000
					1 1/2"						100°	Undercut	0.507"	0.073"	Fully Threaded	70,000	0.265"	-80 to 400	—	5	000000000	00000




							M3 × 0.5 mm

							5 mm				90°	Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	10	000000000	00000


							6 mm				90°	Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	10	000000000	00000
							8 mm				90°	Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	10	000000000	00000
							10 mm				90°	Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	10	000000000	00000
							12 mm				90°	Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	10	000000000	00000




												M4 × 0.7 mm

								6 mm	90°			Undercut	7.50 mm	1.35 mm	Fully Threaded	70,000	4.546 mm	-80 to 400	DIN 965	10	000000000	0000


								8 mm	90°			Undercut	7.50 mm	1.35 mm	Fully Threaded	70,000	4.546 mm	-80 to 400	DIN 965	10	000000000	0000
								10 mm	90°			Undercut	7.50 mm	1.35 mm	Fully Threaded	70,000	4.546 mm	-80 to 400	DIN 965	10	000000000	0000
								12 mm	90°			Undercut	7.50 mm	1.35 mm	Fully Threaded	70,000	4.546 mm	-80 to 400	DIN 965	10	000000000	0000
								16 mm	90°			Undercut	7.50 mm	1.35 mm	Fully Threaded	70,000	4.546 mm	-80 to 400	DIN 965	10	000000000	00000




M5 × 0.8 mm

8 mm												90°	Undercut	9.20 mm	1.35 mm	Fully Threaded	70,000	5.562 mm	-80 to 400	DIN 965	10	000000000	00000


10 mm										90°		Undercut	9.20 mm	1.35 mm	Fully Threaded	70,000	5.562 mm	-80 to 400	DIN 965	10	000000000	00000
12 mm										90°		Undercut	9.20 mm	1.35 mm	Fully Threaded	70,000	5.562 mm	-80 to 400	DIN 965	10	000000000	00000
16 mm										90°		Undercut	9.20 mm	1.35 mm	Fully Threaded	70,000	5.562 mm	-80 to 400	DIN 965	10	000000000	00000
20 mm										90°		Undercut	9.20 mm	1.35 mm	Fully Threaded	70,000	5.562 mm	-80 to 400	DIN 965	10	000000000	00000




		M6 × 1 mm

		12 mm								90°		Undercut	11.00 mm	2.10 mm	Fully Threaded	70,000	6.655 mm	-80 to 400	DIN 965	5	000000000	00000


		16 mm								90°		Undercut	11.00 mm	2.10 mm	Fully Threaded	70,000	6.655 mm	-80 to 400	DIN 965	5	000000000	00000
		20 mm								90°		Undercut	11.00 mm	2.10 mm	Fully Threaded	70,000	6.655 mm	-80 to 400	DIN 965	5	000000000	00000
		25 mm								90°		Undercut	11.00 mm	2.10 mm	Fully Threaded	70,000	6.655 mm	-80 to 400	DIN 965	5	000000000	00000
		30 mm								90°		Undercut	11.00 mm	2.10 mm	Fully Threaded	70,000	6.655 mm	-80 to 400	DIN 965	5	000000000	00000




				M8 × 1.25 mm

				16 mm						90°		Undercut	14.50 mm	2.90 mm	Fully Threaded	70,000	9.041 mm	-80 to 400	DIN 965	5	000000000	00000


				20 mm						90°		Undercut	14.50 mm	2.90 mm	Fully Threaded	70,000	9.041 mm	-80 to 400	DIN 965	5	000000000	00000
				25 mm						90°		Undercut	14.50 mm	2.90 mm	Fully Threaded	70,000	9.041 mm	-80 to 400	DIN 965	5	000000000	00000
				30 mm						90°		Undercut	14.50 mm	2.90 mm	Fully Threaded	70,000	9.041 mm	-80 to 400	DIN 965	5	000000000	00000


				Highly Corrosion-Resistant 316 Stainless Steel with Silicone Rubber O-Ring







												M2 × 0.4 mm

												3 mm	90°	Undercut	3.80 mm	0.70 mm	Fully Threaded	70,000	2.437 mm	-80 to 400	DIN 965	5	000000000	00000


												4 mm	90°	Undercut	3.80 mm	0.70 mm	Fully Threaded	70,000	2.437 mm	-80 to 400	DIN 965	5	000000000	00000
												5 mm	90°	Undercut	3.80 mm	0.70 mm	Fully Threaded	70,000	2.437 mm	-80 to 400	DIN 965	5	000000000	00000
												6 mm	90°	Undercut	3.80 mm	0.70 mm	Fully Threaded	70,000	2.437 mm	-80 to 400	DIN 965	5	000000000	00000
												10 mm	90°	Undercut	3.80 mm	0.70 mm	Fully Threaded	70,000	2.437 mm	-80 to 400	DIN 965	5	000000000	00000
							16 mm					90°	Undercut	3.80 mm	0.70 mm	Fully Threaded	70,000	2.437 mm	-80 to 400	DIN 965	5	000000000	00000




												M2.5 × 0.45 mm

												5 mm	90°	Undercut	4.70 mm	0.80 mm	Fully Threaded	70,000	2.946 mm	-80 to 400	DIN 965	5	000000000	00000


												8 mm	90°	Undercut	4.70 mm	0.80 mm	Fully Threaded	70,000	2.946 mm	-80 to 400	DIN 965	5	000000000	00000
												12 mm	90°	Undercut	4.70 mm	0.80 mm	Fully Threaded	70,000	2.946 mm	-80 to 400	DIN 965	5	000000000	00000




												M3 × 0.5 mm

												8 mm	90°	Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	5	000000000	00000


												14 mm	90°	Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	5	000000000	00000
16 mm												90°	Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	5	000000000	00000
20 mm	90°											Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	5	000000000	00000
25 mm	90°											Undercut	5.60 mm	0.90 mm	Fully Threaded	70,000	3.454 mm	-80 to 400	DIN 965	5	000000000	00000




												M4 × 0.7 mm

												10 mm	90°	Undercut	7.50 mm	1.35 mm	Fully Threaded	70,000	4.546 mm	-80 to 400	DIN 965	5	000000000	00000


												25 mm	90°	Undercut	7.50 mm	1.35 mm	Fully Threaded	70,000	4.546 mm	-80 to 400	DIN 965	5	000000000	00000




												M6 × 1 mm

												8 mm	90°	Undercut	11.00 mm	2.10 mm	Fully Threaded	70,000	6.655 mm	-80 to 400	DIN 965	5	000000000	00000


												16 mm	90°	Undercut	11.00 mm	2.10 mm	Fully Threaded	70,000	6.655 mm	-80 to 400	DIN 965	5	000000000	00000