McMaster-Carr logo
    Filter by
    System of Measurement
    Material
    Chamfer Type
    Number of Flutes
    For Hole Type
    Pitch Diameter Limit
    Attribute Image
    Shank Type
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    254 Products

    Chip-Clearing Tap Sets

    A range of sizes that remove chips so they don’t ruin the threads or jam the tap. The spiral-point flutes force chips through the hole to prevent buildup and create threads faster than standard taps. Also known as gun taps.
    High-Speed Steel
    Image of Product. Front orientation. Taps. Chip-Clearing Tap Sets.
    The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Gold Oxide—The finish increases wear resistance and reduces friction to improve chip flow, so these taps can last 50% longer than uncoated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Plug Chamfer
    No. of
    Pieces
    Thread Size
    Thread
    Type
    Flute Type
    Container
    Type
    Shank
    Type
    Specs.
    Met
    Each
    Uncoated
    7M3, M4, M5, M6, M8, M10, M12
    Metric
    Spiral PointPlastic CaseSquareISO 5292847N110000000
     
    Gold Oxide
    101/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20
    UNF, UNC
    Spiral PointMetal CaseSquare27275A21000000
    190-80, 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28
    UNF, UNC
    Spiral PointMetal CaseSquare27275A22000000
     
    Titanium Nitride (TiN) Coated
    7M3, M4, M5, M6, M8, M10, M12
    Metric
    Spiral PointPlastic CaseSquareISO 5294737N11000000
     

    Taps

    Image of Product. Front orientation. Taps. Taps.
    Cut threads into holes so screws, bolts, and rods fit snugly. Our basic taps have straight flutes that are good for most jobs.
    Carbide—The hardest and most wear-resistant taps. They last 10 times longer than high-speed steel for the best performance on hard and abrasive materials like nickel and fiberglass. Carbide can be brittle, however, so these taps require a rigid machine tool holder to prevent breakage and should not be used for hand tapping.
    Titanium Aluminum Nitride (TiAlN) Coated—No taps last longer. These are the best for high-speed, high-temperature drilling of tough materials such as iron and titanium.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.
    Number of Flutes—Taps with fewer flutes have more space to capture chips, so you won’t have to clear them as often. However, they can be more difficult to keep straight in the hole.
    Drill Bit
    Plug Chamfer
    Bottoming
    Chamfer
    Thread Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    Each
    Carbide
     
    Titanium Aluminum Nitride (TiAlN) Coated
    0-80
    9/32"1 5/8"UNF
    23/64"
    0.0469"Square7822N51000000———0
    2-56
    7/16"1 3/4"UNC
    251 Ga.
    0.067"Square7822N52000007822N58000000
    4-40
    5/16"1 7/8"UNC
    243 Ga.
    0.089"Square7822N24000007822N2500000
    6-32
    3/8"2"UNC
    336 Ga.
    0.1065"Square7822N13000007822N1400000
    8-32
    3/8"2 1/8"UNC
    429 Ga.
    0.136"Square7822N17000007822N1800000
    10-24
    1/2"2 3/8"UNC
    425 Ga.
    0.1495"Square7822N28000007822N2900000
    10-32
    1/2"2 3/8"UNF
    421 Ga.
    0.159"Square7822N15000007822N1600000
    1/4"-20
    5/8"2 1/2"UNC
    47 Ga.
    0.201"Square7822N110000007822N12000000
    1/4"-28
    5/8"2 1/2"UNF
    43 Ga.
    0.213"Square7822N530000007822N59000000
    5/16"-18
    11/16"2 23/32"UNC
    4F
    0.257"Square7822N190000007822N21000000
    3/8"-16
    3/4"2 15/16"UNC
    45/16"
    0.3125"Square7822N220000007822N23000000
    1/2"-13
    15/16"3 3/8"UNC
    427/64"
    0.4219"Square7822N260000007822N27000000
    9/16"-12
    1"3 19/32"UNC
    431/64"
    0.4844"Square7822N54000000———0
    5/8"-11
    1 1/16"3 13/16"UNC
    417/32"
    0.5313"Square7822N550000007822N61000000
    3/4"-10
    1 7/32"4 1/4"UNC
    421/32"
    0.6563"Square7822N560000007822N62000000
    3/4"-16
    1 7/32"4 1/4"UNF
    411/16"
    0.6875"Square7822N57000000———0
    M3 × 0.5 mm5/16"1 15/16"Metric
    32.5 mm0.0984"Square7822N31000007822N3200000
    M4 × 0.7 mm3/8"2 1/8"Metric
    43.3 mm
    0.1299"Square7822N33000007822N3400000
    M5 × 0.8 mm1/2"2 3/8"Metric
    44.2 mm
    0.1654"Square7822N35000007822N3600000
    M6 × 1 mm5/8"2 1/2"Metric
    45 mm0.1969"Square7822N370000007822N38000000
    M8 × 1.25 mm11/16"2 23/32"Metric
    46.7 mm
    0.2638"Square7822N390000007822N41000000
    M10 × 1.5 mm1 1/4"2 31/32"Metric
    48.5 mm
    0.3346"Square7822N630000007822N64000000
     

    Chip-Clearing Tap and Drill Bit Sets for Through Holes

    Image of Product. Front orientation. Tap and Drill Bit Sets. Chip-Clearing Tap and Drill Bit Sets for Through Holes.
    Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Gold-Oxide High-Speed Steel Tap
    18Plug6-40
    8-36
    10-24
    10-32
    1/4"-28
    5/16"-24
    3/8"-24
    7/16"-20
    1/2"-20
    2 1/16"
    2 7/32"
    2 15/32"
    2 5/8"
    2 7/8"
    3 1/8"
    3 5/32"
    3 3/8"
    UNF
    2, 3H2, H329/64"
    25/64"
    33 ga.
    29 ga.
    25 ga.
    21 ga.
    3 ga.
    I
    Q
    Gold-Oxide High-Speed SteelMetal Case27275A320000000
    18PlugM2.5 × 0.45 mm
    M3 × 0.5 mm
    M3.5 × 0.6 mm
    M4 × 0.7 mm
    M5 × 0.8 mm
    M6 × 1.00 mm
    M8 × 1.25 mm
    M10 × 1.5 mm
    M12 × 1.75 mm
    1 13/16"
    1 15/16"
    2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 3/8"
    Metric
    2, 3D3, D4, D5, D62.05 mm
    2.5 mm
    2.9 mm
    3.3 mm
    4.2 mm
    5 mm
    6.7 mm
    8.5 mm
    10.2 mm
    Gold-Oxide High-Speed SteelMetal Case27275A11000000
     

    Thread Mills

    Cut a range of thread sizes with a single tool. These thread mills can also produce both right-hand and left-hand threads. All are made of solid carbide with an aluminum-titanium-nitride (AlTiN) coating, so they have high strength and excellent wear resistance, even when cutting hard and abrasive material. Use them in a CNC machine that allows helical interpolation.
    When used for internal threading, thread mills can create threads of any size equal to or greater than the minimum size listed. They leave space in the hole for chips to fall, and a broken thread mill can fall into the hole without damaging the workpiece.
    For Internal Threads (UNC, UNEF, UNF, UNJ, UNS)
    Image of ProductInUse. Front orientation. Thread Mills. For Internal Threads.
    Image of Product. Front orientation. Thread Mills. For Internal Threads.
    Thread mills cut internal UNC, UNEF, UNF, UNJ, or UNS threads, but the threads they create have a fixed pitch.
    For Min.
    Screw Size
    Threads
    per In.
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Shank
    Size
    Each
    Aluminum Titanium Nitride (AlTiN)-Coated Carbide
    No. 4
    403/16"2 1/2"21/4"5277N110000000
    No. 6
    3217/64"2 1/2"31/4"5277N12000000
    No. 8
    3217/64"2 1/2"31/4"5277N13000000
    No. 10
    2411/32"2 1/2"31/4"5277N14000000
    No. 10
    3221/64"2 1/2"31/4"5277N15000000
    1/4"
    2033/64"2 1/2"31/4"5277N16000000
    5/16"
    185/8"2 1/2"31/4"5277N17000000
    3/8"
    1625/32"3"45/16"5277N18000000
    1/2"
    137/8"3"43/8"5277N19000000
     
    For Internal Threads (Metric)
    Image of ProductInUse. Front orientation. Thread Mills. For Internal Threads.
    Image of Product. Front orientation. Thread Mills. For Internal Threads.
    Thread mills cut internal metric threads, but the threads they create have a fixed pitch.
    For Min.
    Screw Size
    Thread
    Pitch, mm
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Shank
    Size
    Each
    Aluminum Titanium Nitride (AlTiN)-Coated Carbide
    M5
    0.821/64"2 9/32"30.2362"5277N210000000
    M6
    131/64"2 9/32"30.2362"5277N22000000
    M8
    1.2521/32"2 9/32"30.2362"5277N23000000
     
    For Internal/External Threads (UNC, UNEF, UNF, UNS) and Internal Threads (UNJ)
    Image of ProductInUse. Front orientation. Thread Mills. For External Threads, For Internal Threads.
    Image of ProductInUse. Front orientation. Thread Mills. For External Threads, For Internal Threads.
    Image of Product. Front orientation. Thread Mills. For External Threads, For Internal Threads.
    Thread mills have a single cutting point that cuts internal/external UNC, UNEF, UNF, or UNS threads in a range of different pitches on both the inside and outside of the workpiece. They can also cut internal UNJ threads in a range of different pitches.
    For Min.
    Screw Size
    Threads
    per In.
    Overall
    Lg.
    Shank
    Size
    Neck
    Dia.
    Each
    Aluminum Titanium Nitride (AlTiN)-Coated Carbide
    No. 2
    56 to 801 1/2"1/8"0.034"4425N11000000
    No. 4
    48 to 802"3/16"0.045"4425N1200000
    No. 6
    32 to 562"3/16"0.049"4425N1300000
    No. 8
    32 to 562"3/16"0.07"4425N1400000
    No. 10
    28 to 482"3/16"0.075"4425N1500000
    No. 12
    24 to 482"3/16"0.08"4425N1600000
    1/4"
    24 to 482 1/2"1/4"0.104"4425N1700000
    5/16"
    16 to 482 1/2"1/4"0.153"4425N1800000
    3/8"
    18 to 483"3/8"0.192"4425N1900000
    1/2"
    12 to 483"3/8"0.24"4425N2100000
     

    Helical Insert Taps

    Image of Product. Front orientation. Taps. Helical Insert Taps.
    Match the size of helical inserts so they fit tightly when installed in the hole.
    High-Speed Steel—These taps resist heat and wear to stay sharp.
    Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.
    Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.
    Drill Bit
    Plug Chamfer
    Bottoming
    Chamfer
    For Insert
    Size
    Thread
    Lg.
    Overall
    Lg.
    For Insert
    Thread Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    Each
    High-Speed Steel
     
    Uncoated
    1/8
    1 1/16"2 7/16"NPT
    4W
    0.386"Square91711A251000000———0
    1/8
    1 1/2"3 1/8"BSPP
    425/64"
    0.3906"Square91711A11100000———0
    1/4
    1 1/16"2 9/16"NPT
    433/64"
    0.5156"Square91711A252000000———0
    1/4
    1 5/8"3 1/2"BSPP
    417/32"
    0.5313"Square91711A11200000———0
    3/8
    1 3/8"3 1/8"NPT
    421/32"
    0.6563"Square91711A253000000———0
    3/8
    1 7/8"4"BSPP
    443/64"0.6719"Square91711A113000000———0
    1/2
    1 3/8"3 1/4"NPT
    513/16"
    0.8125"Square91711A254000000———0
    1/2
    2 1/4"4 7/8"BSPP
    427/32"
    0.8738"Square91711A114000000———0
    0-80
    3/8"1 11/16"UNF
    252 Ga.
    0.0635"Square91709A6810000091709A682000000
    1-64
    1/2"1 13/16"UNC
    346 Ga.
    0.081"Square91709A09000000———0
    1-64
    9/16"1 7/8"UNC
    346 Ga.
    0.0810"Square———091709A68300000
    2-56
    9/16"1 7/8"UNC
    341 Ga.
    0.096"Square91709A0980000091709A40100000
    3-48
    5/8"1 15/16"UNC
    37/64"
    0.1094"Square91709A0990000091709A40400000
    3-56
    5/8"1 15/16"UNF
    336 Ga.
    0.1065"Square91709A0550000091709A40300000
    4-40
    11/16"2"UNC
    331 Ga.
    0.12"Square91709A1010000091709A40700000
    4-48
    11/16"2"UNF
    331 Ga.
    0.12"Square91709A0570000091709A41000000
    5-40
    3/4"2 1/8"UNC
    329 Ga.
    0.136"Square91709A0610000091709A41300000
    6-32
    7/8"2 3/8"UNC
    325 Ga.
    0.1495"Square91709A1020000091709A41600000
    6-40
    3/4"2 1/8"UNF
    325 Ga.
    0.1495"Square91709A0630000091709A41900000
    8-32
    15/16"2 3/8"UNC
    316 Ga.
    0.177"Square91709A1030000091709A42200000
    8-36
    15/16"2 3/8"UNF
    316 Ga.
    0.177"Square91709A0650000091709A42500000
    10-24
    1"2 1/2"UNC
    35 Ga.
    0.2055"Square91709A1040000091709A42800000
    10-32
    1"2 1/2"UNF
    313/64"
    0.2031"Square91709A1510000091709A43100000
    12-24
    1 1/8"2 23/32"UNC
    31 Ga.
    0.228"Square91709A0670000091709A43400000
    1/4"-20
    1 1/8"2 23/32"UNC
    3H
    0.266"Square91709A1050000091709A43700000
    1/4"-28
    1 1/8"2 23/32"UNF
    36.7 mm
    0.2637"Square91709A1520000091709A44000000
    5/16"-18
    1 1/4"2 15/16"UNC
    4Q
    0.332"Square91709A1060000091709A44300000
    5/16"-24
    1 1/4"2 15/16"UNF
    421/64"
    0.3281"Square91709A1530000091709A44600000
    3/8"-16
    1 21/32"3 3/8"UNC
    4X
    0.397"Square91709A1070000091709A44900000
    3/8"-24
    1 7/16"3 5/32"UNF
    425/64"
    0.3906"Square91709A1540000091709A45200000
    7/16"-14
    1 21/32"3 19/32"UNC
    429/64"
    0.4531"Square91709A1080000091709A45500000
    7/16"-20
    1 21/32"3 3/8"UNF
    429/64"
    0.4531"Square91709A1550000091709A45800000
    1/2"-13
    1 13/16"3 13/16"UNC
    417/32"
    0.5313"Square91709A1090000091709A46100000
    1/2"-20
    1 21/32"3 19/32"UNF
    433/64"
    0.5156"Square91709A1560000091709A46400000
    9/16"-12
    1 13/16"4 1/32"UNC
    419/32"
    0.5938"Square91709A1110000091709A467000000
    9/16"-18
    1 13/16"3 13/16"UNF
    437/64"
    0.5781"Square91709A1570000091709A470000000
    5/8"-11
    2"4 1/4"UNC
    421/32"
    0.6563"Square91709A1120000091709A473000000
    5/8"-18
    1 13/16"4 1/32"UNF
    441/64"
    0.6406"Square91709A15800000091709A476000000
    3/4"-10
    2 7/32"4 11/16"UNC
    425/32"
    0.7813"Square91709A11300000091709A479000000
    3/4"-16
    2"4 15/32"UNF
    449/64"
    0.7656"Square91709A15900000091709A482000000
    7/8"-9
    2 1/2"5 1/16"UNC
    429/32"
    0.9063"Square91709A11400000091709A485000000
    7/8"-14
    2 1/2"5 1/8"UNF
    457/64"
    0.8906"Square91709A16100000091709A488000000
    1"-8
    2 9/16"5 3/4"UNC
    41 1/32"
    1.0313"Square91709A11500000091709A491000000
    1"-12
    2 9/16"5 7/16"UNF
    41 1/32"
    1.0313"Square91709A07300000091709A497000000
    1"-14
    2 9/16"5 7/16"UNF
    41 1/32"
    1.0313"Square91709A07100000091709A494000000
    1 1/8"-7
    3"6 1/16"UNC
    41 11/64"
    1.1719"Square91709A11600000091709A500000000
    1 1/8"-12
    2 9/16"5 3/4"UNF
    41 5/32"
    1.1563"Square———091709A503000000
    1 1/8"-12
    2 9/16"5 3/4"UNF
    61 5/32"
    1.1563"Square91709A075000000———0
    1 1/4"-7
    3"6 3/8"UNC
    41 19/64"
    1.2969"Square91709A11700000091709A506000000
    1 1/4"-8
    3"6"UN
    41 1/4"
    1.25"Square92335A31100000091709A310000000
    1 1/4"-12
    3"6 1/16"UNF
    41 9/32"
    1.2813"Square———091709A509000000
    1 1/4"-12
    3"6 1/16"UNF
    61 9/32"
    1.2813"Square91709A077000000———0
    1 3/8"-6
    3 3/16"6 11/16"UNC
    61 27/64"
    1.4219"Square———091709A512000000
    1 1/2"-6
    3 3/16"7"UNC
    61 35/64"
    1.5469"Square91709A11900000091709A518000000
    1 1/2"-8
    3"6 5/8"UN
    61 1/2"
    1.5"Square92335A31500000091709A320000000
    1 1/2"-12
    3 3/16"6 11/16"UNF
    61 17/32"
    1.5313"Square91709A08300000091709A521000000
    1 3/4"-8
    3 5/8"7 1/4"UN
    61 3/4"
    1.75"Square92335A319000000———0
    1 3/4"-8
    3 3/4"7 1/4"UN
    61 3/4"
    1.75"Square———091709A330000000
    M2
    1/2"1 13/16"Metric
    32.1 mm0.0827"Square91709A24000000091709A230000000
    M2.2
    9/16"1 7/8"Metric
    32.3 mm0.0906"Square———091709A210000000
    M2.2
    9/16"1 7/8"Metric
    32.35 mm
    0.0925"Square91709A19000000———0
    M2.5
    5/8"1 15/16"Metric
    337 Ga.
    0.104"Square91709A6780000091709A57800000
    M3
    11/16"2"Metric
    33.2 mm
    0.1259"Square91709A3550000091709A52400000
    M3.5
    3/4"2 1/8"Metric
    33.7 mm
    0.1456"Square91709A1950000091709A220000000
    M4
    7/8"2 3/8"Metric
    319 Ga.
    0.166"Square91709A3590000091709A52700000
    M5
    1"2 1/2"Metric
    35.3 mm
    0.2086"Square91709A2010000091709A53000000
    M6
    1 1/8"2 23/32"Metric
    46.3 mm
    0.248"Square91709A2020000091709A53300000
    M7
    1 1/4"2 15/16"Metric
    47.3 mm
    0.2874"Square91709A2030000091709A53600000
    M8
    1 1/4"2 15/16"Metric
    48.3 mm
    0.3267"Square91709A6500000091709A53900000
    M8
    1 1/4"2 15/16"Metric
    48.4 mm
    0.3307"Square91709A2040000091709A54200000
    M10
    1 7/16"3 3/16"Metric
    413/32"
    0.4063"Square91709A6720000091709A57500000
    M10
    1 21/32"3 3/8"Metric
    413/32"
    0.4063"Square91709A6530000091709A545000000
    M10
    1 21/32"3 3/8"Metric
    410.5 mm
    0.4134"Square91709A2050000091709A54800000
    M12
    1 21/32"3 19/32"Metric
    431/64"
    0.4844"Square91709A6750000091709A551000000
    M12
    1 21/32"3 19/32"Metric
    412.5 mm
    0.4921"Square91709A2060000091709A55400000
    M12
    1 21/32"3 19/32"Metric
    412.5 mm
    0.4921"Square91709A6560000091709A55700000
    M14
    1 13/16"3 13/16"Metric
    437/64"
    0.5781"Square91709A6590000091709A560000000
    M14
    1 13/16"4 1/32"Metric
    414.5 mm
    0.5709"Square91709A36800000091709A563000000
    M16
    2"4 1/4"Metric
    421/32"
    0.6563"Square92450A62100000092450A62200000
    M16
    2"4 1/4"Metric
    416.5 mm
    0.6496"Square91709A37100000091709A566000000
    M18
    2 7/32"4 11/16"Metric
    447/64"
    0.7344"Square91709A37300000091709A569000000
    M20
    2 7/32"4 11/16"Metric
    413/16"
    0.8125"Square92450A31100000092450A623000000
    M20
    2 7/32"4 29/32"Metric
    413/16"
    0.8125"Square91709A37500000091709A572000000
    M24
    1 1/2"4"Metric
    431/32"
    0.9688"Square92450A32500000091709A340000000
    M30
    1 1/2"4"Metric
    41 7/32"
    1.2188"Square92450A34500000091709A350000000
    M36
    3 1/4"6 5/8"Metric
    61 15/32"
    1.4688"Square92450A36100000091709A360000000
     

    Thread-Repairing File Sets

    Use these sets to repair fastener, pipe, and conduit threads.
    For Internal and External Threads
    Image of Product. Front orientation. Thread-Repairing Files. Thread-Repairing File Sets, For Internal and External Threads.
    No. of
    Pieces
    For Threads per In.
    For Thread Pitch, mm
    Overall
    Lg.
    Material
    Container
    Type
    Each
    48, 9, 10, 11, 11 1/2, 12, 13, 14, 16, 18, 20, 24, 27, 28, 320.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 39 1/4"SteelPlastic Pouch2542A610000000

    Internal Thread Repair Tools for Any Thread Pitch

    Image of ProductInUse. Front orientation. Thread Repair Tools. Internal Thread Repair Tools for Any Thread Pitch.
    These tools have adjustable blades to repair any inch or metric thread size. Use them on threaded holes with an ID from 5/16" to 1 1/4" or 8 mm to 32 mm.
    Thread Repair Tools
    Replacement Thread
    Repair Tool Pads
    Replacement Thread
    Repair Tool Blades
    For ID
    For Threads
    per Inch
    For Thread
    Pitch
    Overall
    Lg.
    Blade
    Material
    Handle
    Material
    Each
    Each
    Each
    5/16" to 7/16", 8 mm to 11 mmAnyAny4 5/16"SteelPlastic2581A4100000002581A91000002581A81000000
    1/2" to 5/8", 12 mm to 16 mmAnyAny4 5/16"SteelPlastic2581A420000002581A9200002581A8200000
    11/16" to 13/16", 16 mm to 20 mmAnyAny4 3/8"SteelPlastic2581A430000002581A9300002581A8300000
    7/8" to 1 1/4", 22 mm to 32 mmAnyAny5 3/8"SteelPlastic2581A440000002581A9400002581A8400000
     

    Fastener Thread-Repairing Files

    Repair rusted and damaged fastener threads. One file restores a range of thread sizes.
    For Internal and External Threads
    Image of Product. Front orientation. Thread-Repairing Files. Fastener Thread-Repairing Files, For Internal and External Threads.
    For Threads per In.
    For Thread Pitch, mm
    Wd.
    Thk.
    Overall
    Lg.
    Material
    Each
    0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 33/8"3/8"9 1/4"Steel2542A42000000
    9, 10, 12, 16, 20, 27, 28, 323/8"3/8"9 1/4"Steel2542A5100000
    11, 12, 13, 14, 16, 18, 20, 243/8"3/8"9 1/4"Steel2542A4100000

    Left-Hand Thread Helical Insert Taps

    Image of Product. Front orientation. Taps. Left-Hand Thread Helical Insert Taps.
    Size holes for installing helical inserts that anchor left-hand bolts and rods. Helical inserts reinforce the connection between holes and fasteners that secure counter-clockwise rotating parts. Left-hand threads keep components such as flywheels and propellers from loosening and spinning off.
    High-Speed Steel—These taps resist heat and wear to stay sharp.
    Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.
    Drill Bit
    Plug Chamfer
    For Insert
    Size
    Thread
    Lg.
    Overall
    Lg.
    For Insert
    Thread Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1/4"-20
    1 1/8"2 23/32"UNC
    4H
    0.266"Square92090A311000000
    1/4"-28
    1 1/8"2 23/32"UNF
    46.7 mm
    0.2637"Square92090A31500000
    5/16"-18
    1 1/4"2 15/16"UNC
    4Q
    0.332"Square92090A32100000
    5/16"-24
    1 1/4"2 15/16"UNF
    421/64"
    0.3281"Square92090A32300000
    3/8"-16
    1 21/32"3 3/8"UNC
    4X
    0.397"Square92090A32700000
    3/8"-24
    1 7/16"3 5/32"UNF
    425/64"
    0.3906"Square92090A33100000
    1/2"-13
    1 13/16"3 13/16"UNC
    417/32"
    0.5313"Square92090A34300000
    1/2"-20
    1 21/32"3 19/32"UNF
    433/64"
    0.5156"Square92090A34700000
    5/8"-11
    1 13/16"4 1/4"UNC
    421/32"
    0.6563"Square92090A351000000
    5/8"-18
    1 13/16"4 1/32"UNF
    441/64"
    0.6406"Square92090A355000000
    3/4"-10
    2 7/32"4.667"UNC
    425/32"
    0.7813"Square92090A359000000
     

    Pipe and Conduit Thread-Repairing Files

    Repair rusted and damaged threads in pipe and conduit. One file restores a range of thread sizes.
    For Internal Threads
    Image of Product. Front orientation. Thread-Repairing Files. Pipe and Conduit Thread-Repairing Files, For Internal Threads.
    Thread File Handles—Thread file handles slip over the file to provide a comfortable grip.
    Thread-Repairing Files
    Thread File Handles
    For Threads
    per In.
    Wd.
    Thk.
    Overall
    Lg.
    Material
    Each
    Pkg.
    Qty.
    Pkg.
    8, 107/16"7/16"10"Steel2616A1600000062616A4100000
    8, 11 1/27/16"7/16"10"Steel2616A170000062616A410000
    10, 147/16"7/16"10"Steel2616A180000062616A410000
    For Internal and External Threads
    Image of Product. Front orientation. Thread-Repairing Files. Pipe and Conduit Thread-Repairing Files, For Internal and External Threads.
    For Threads per In.
    Wd.
    Thk.
    Overall
    Lg.
    Material
    Each
    8, 10, 11 1/2, 14, 16, 18, 24, 273/8"3/8"9 1/4"Steel2542A52000000
    back to top