McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    29 Products

    Pipe and Conduit Taps

    Add internal threads to pipe and conduit or components such as manifolds. They have straight flutes that are good for most jobs.
    NPT ThreadAbout NPT Thread
    Image of Product. Front orientation. Taps. Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Carbon Steel—The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square000000000000000
    1
    		1 3/4"5 1/4"511 1/21 9/64"
    		1.1406"Square0000000000000
     
    Titanium Nitride (TiN) Coated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square0000000000000
     
    Carbon Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 5/32"
    		1.1563"Square0000000000000
     
    NPTF ThreadAbout NPTF Thread
    Image of Product. Front orientation. Taps. Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square000000000000000
     
    Titanium Nitride (TiN) Coated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square0000000000000
     
    NPSM ThreadAbout NPSM Thread
    Image of Product. Front orientation. Taps. Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 13/64"
    		1.2031"Square00000000000000
     
    Titanium Nitride (TiN) Coated
    1
    		1 3/4"3 3/4"511 1/21 13/64"
    		1.2031"Square0000000000000
     
    NPSF ThreadAbout NPSF Thread
    Image of Product. Front orientation. Taps. Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 11/64"
    		1.1719"Square00000000000000
     
    BSPP ThreadAbout BSPP Thread
    Image of Product. Front orientation. Taps. Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Drill Bit
    Bottoming
    Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size,
    mm
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511301.1811"Square00000000000000
     
    Titanium Nitride (TiN) Coated
    1
    		1 3/4"3 3/4"611301.1811"Square0000000000000
     
    BSPT ThreadAbout BSPT Thread
    Image of Product. Front orientation. Taps. Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Drill Bit
    Bottoming
    Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size,
    mm
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511301.1811"Square00000000000000
     
    Titanium Nitride (TiN) Coated
    1
    		1 3/4"3 3/4"611301.1811"Square0000000000000
     
    PTF-SAE ThreadAbout PTF-SAE Thread
    Image of Product. Front orientation. Taps. Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Drill Bit
    Bottoming
    Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square00000000000000
     
    Titanium Nitride (TiN) Coated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square0000000000000
     

    Pipe and Conduit Tap Sets

    Image of Product. Front orientation. Taps. Pipe and Conduit Tap Sets.
    A range of sizes for adding internal threads to pipe and conduit. These taps can also be used to thread components like manifolds. They have straight flutes that are good for most jobs.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Carbon Steel—The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps.
    No. of
    Pieces
    Pipe Size
    Thread Type
    Chamfer
    Type
    No. of
    Flutes
    Container
    Type
    Shank
    Type
    Each
    High-Speed Steel
    61/8, 1/4, 3/8, 1/2, 3/4, 1
    		NPT
    		Plug4, 5Fabric PouchSquare00000000000000
    61/8, 1/4, 3/8, 1/2, 3/4, 1
    		NPT
    		Plug4, 5Wood CaseSquare0000000000000
     
    Carbon Steel
    61/8, 1/4, 3/8, 1/2, 3/4, 1
    		NPT
    		Plug4, 5Fabric PouchSquare0000000000000
    61/8, 1/4, 3/8, 1/2, 3/4, 1
    		BSPP, Metric
    		Bottoming4, 5Fabric PouchSquare00000000000000
    61/8, 1/4, 3/8, 1/2, 3/4, 1
    		BSPT, Metric
    		Plug4, 5Fabric PouchSquare00000000000000
     

    Tap and Die Sets

    Image of Product. Front orientation. Tap and Die Sets.
    Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic.
    Carbon Steel—Carbon steel taps are for thread repair and occasional tapping.
    High-Speed Steel—High-speed steel taps and dies last longer than carbon steel when used on similar material.
    Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Hex—Hex-shaped dies are for thread repair and can be used with conventional wrenches.
    No. of
    Pieces
    Tap Sizes Included
    Tap Chamfer
    Type
    Die
    Shape
    Die Sizes Included
    Wd.
    Container
    Type
    Each
    Carbon Steel Taps and Dies
     
    Right-Hand Thread
    121/8, 1/4, 3/8, 1/2, 3/4, 1TaperHex1/8"-27, 1/4"-18, 3/8"-18, 1/2"-14, 3/4"-14, 1"-11 1/21 1/16", 1 1/4", 1 7/16", 1 5/8", 2", 2 3/8"Plastic Case00000000000000
     
    High-Speed Steel Taps and Carbon Steel Dies
     
    Right-Hand Thread
    121/8, 1/4, 3/8, 1/2, 3/4, 1TaperHex1/8"-27, 1/4"-18, 3/8"-18, 1/2"-13, 3/4"-14, 1"-11 1/225/32", 1 1/16", 1 1/4", 1 5/8", 1 13/16", 2 3/16"Plastic Case0000000000000
     

    Chip-Clearing Pipe and Conduit Taps for Steel and Stainless Steel

    Made of a high-vanadium alloy, these taps are harder and more wear-resistant than other high-speed steel taps. The widely spaced flutes prevent buildup that can ruin threads and keep pipe and conduit from making strong connections. Also known as interrupted-thread taps.
    NPT ThreadAbout NPT Thread
    Image of Product. Front orientation. Taps. Chip-Clearing Pipe and Conduit Taps for Steel and Stainless Steel.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    Cobalt Steel
     
    Titanium Nitride (TiN) Coated
    1
    		1 3/4"3 3/4"411 1/21 9/64"
    		1.1406"Square00000000000000
     

    2-in-1 Pipe and Conduit Taps

    One tap threads holes in pipe and conduit from start to finish. Begin with the taper-chamfer end, which gradually engages with the material and requires minimal force to turn the tool. Then flip to the bottoming-chamfer end to thread all the way through the hole.
    BSPP ThreadAbout BSPP Thread
    Image of Product. Front orientation. Taps. 2-in-1 Pipe and Conduit Taps.
    Image of Attribute. End View. Side1 orientation.

    End View

    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Drill Bit
    Taper Chamfer,
    Bottoming Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    For Wrench
    Size, mm
    No. of
    Flutes
    Threads
    per In.
    Size,
    mm
    Decimal Size
    Equiv.
    For Hex Drive
    Size, mm
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 9/64"3 15/16"2441130.5
    		1.2008"1000000000000000
     

    Chip-Clearing Pipe and Conduit Taps

    With widely spaced flutes, chips fall away from the tap and plenty of lubricant flows to the workpiece. These taps prevent buildup that can ruin threads and keep pipe and conduit from making strong connections. Also known as interrupted-thread taps.
    NPT ThreadAbout NPT Thread
    Image of Product. Front orientation. Taps. Chip-Clearing Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square000000000000000
     
    NPTF ThreadAbout NPTF Thread
    Image of Product. Front orientation. Taps. Chip-Clearing Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square000000000000000
     

    Chip-Clearing Pipe and Conduit Taps for Aluminum, Brass, and Bronze

    Slightly hooked cutting teeth grab and remove long chips from the hole. These taps prevent buildup from soft metals that can ruin threads and keep pipe and conduit from making strong connections.
    NPT ThreadAbout NPT Thread
    Image of Product. Front orientation. Taps. Chip-Clearing Pipe and Conduit Taps for Aluminum, Brass, and Bronze.
    High-Speed Steel—These taps resist heat and wear to stay sharp.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square00000000000000
     

    Pipe and Conduit Drill Taps

    Image of Product. Front orientation. Drill Taps. Pipe and Conduit Drill Taps.
    Drill and thread holes for pipe and conduit without switching tools. Made of uncoated high-speed steel, these tools are for use on most metal and plastic. Their right-hand spiral flutes keep chips clear by drawing them back toward the tap and out of the hole. With a square shank, they're compatible with tap wrenches and tap holders for drill presses and milling machines. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping of through holes.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Threads
    per In.
    Thread
    Lg.
    Overall
    Lg.
    Size
    Decimal Size
    Equiv.
    Point
    Angle
    Flute
    Type
    No. of
    Flutes
    Thread
    Type
    Each
    Uncoated High-Speed Steel
    1
    		11 1/21 3/4"5 3/8"1 9/64"
    		1.1406"118°Spiral6NPTF
    		00000000000000
     

    Left-Hand Pipe and Conduit Taps

    Left-hand threads make it easier to disconnect or join sections of pipe. Similar to using a union fitting, you don’t need to rotate the whole pipe to make changes. These taps have straight flutes that are good for most jobs.
    NPTF ThreadAbout NPTF Thread
    Image of Product. Front orientation. Taps. Left-Hand Pipe and Conduit Taps.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    High-Speed Steel
     
    Uncoated
    1
    		1 3/4"3 3/4"511 1/21 9/64"
    		1.1406"Square000000000000000
     
    back to top