1-72 Taps | McMaster-Carr

A range of sizes that remove chips so they don’t ruin the threads or jam the tap. The spiral-point flutes force chips through the hole to prevent buildup and create threads faster than standard taps. Also known as gun taps.

High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.

Gold Oxide—The finish increases wear resistance and reduces friction to improve chip flow, so these taps can last 50% longer than uncoated taps.

						Spiral-Point Flute for Through Holes
	No. of Pieces	Thread Size	Thread Type	Container Type	Shank Type	Chamfer Type		Each
High-Speed Steel







				Gold Oxide

				19	0-80, 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-40, 4-48, 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28	UNF, UNC	Metal Case	Square	Plug	27275A22	0000000

Taps

Cut threads into holes so screws, bolts, and rods fit snugly. Our basic taps have straight flutes that are good for most jobs.

High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.

Carbon Steel—The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps.

Uncoated—The economical choice, these won't last as long as coated taps.

Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.

Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.

Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.

Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.

Number of Flutes—Taps with fewer flutes have more space to capture chips, so you won’t have to clear them as often. However, they can be more difficult to keep straight in the hole.

Taps Sold as Sets—Include one tap of each chamfer type.

	Taps														Taps Sold as Sets
						Drill Bit			Taper Chamfer		Plug Chamfer		Bottoming Chamfer
	Thread Size	Thread Lg.	Overall Lg.	Thread Type	No. of Flutes	Size	Decimal Size Equiv.	Shank Type		Each		Each		Each	No. of Taps		Each
High-Speed Steel







				Uncoated

				1-72	3/8"	1 11/16"	UNF	2	53 Ga.	0.0595"	Square	2522A752	000000	2522A772	000000	2522A812	000000	3	2522A882	000000




						Titanium Nitride (TiN) Coated

						1-72	3/8"	1 11/16"	UNF	2	53 Ga.	0.0595"	Square	2636A218	00000	2636A219	00000	2636A222	00000	—	———	0


						Carbon Steel







										Uncoated

										1-72	3/8"	1 11/16"	UNF	2	53 Ga.	0.0595"	Square	25995A115	0000	25995A212	0000	25995A116	0000	—	———	0

Tap Sets

These sets include a variety of taps for threading holes so screws, bolts, and rods fit snugly.

High-Speed Steel—Single Thread Size Sets

Taper, Plug, and Bottoming

Chamfer Set

The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic. These sets include one of each chamfer type: Taper for starting holes and threading through holes; plug for through holes and blind holes; and bottoming for cutting the closest to the bottom of any hole.

Uncoated—The economical choice, these won't last as long as coated taps.

							Taper Chamfer, Plug Chamfer, Bottoming Chamfer
	No. of Pieces	Thread Size	Thread Type	Container Type	No. of Flutes	Shank Type		Each
Uncoated



		3	1-72	UNF	Plastic Case	2	Square	2522A882	000000

High-Speed Steel—Multiple Thread Size Sets

Plug Chamfer Set

The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic. These sets include multiple sizes of plug chamfer taps for through holes and blind holes.

Uncoated—The economical choice, these won't last as long as coated taps.

						Plug Chamfer
	No. of Pieces	Thread Size	Thread Type	Container Type	Shank Type		Each
Uncoated



		19	1 each of sizes 0-80, 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-40, 4-48; 5-40, 5-44, 6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, and 12-28	UNF, UNC	Metal Case	Square	27045A21	0000000

Carbon Steel—Single Thread Size Sets

Taper, Plug, and Bottoming

Chamfer Set

The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps. Sets include one each chamfer type: Taper for starting holes and through holes; plug for through holes and blind holes; and bottoming for cutting the closest to the bottom of any hole.

							Taper Chamfer, Plug Chamfer, Bottoming Chamfer
	No. of Pieces	Thread Size	Thread Type	Container Type	No. of Flutes	Shank Type		Each
Uncoated



		3	1-72	UNF	Plastic Case	2	Square	25995A118	000000

Chip-Clearing Taps

Spiral-Point Flute for Through Holes

Remove long, stringy chips to produce cleaner threads than standard taps. The flute design prevents buildup to protect the quality of the threads and avoid damage to the tap. Since you don’t need to reverse these taps to extract chips, they also create threads faster.

High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.

Uncoated—The economical choice, these won't last as long as coated taps.

Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.

Titanium Carbon Nitride (TiCN) Coated—Resist heat, chipping, and wear for three times the life of uncoated taps.

Spiral-Point Flute for Through Holes—Push chips ahead of the tap and out of through holes. Also known as gun taps.

Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.

					Drill Bit			Spiral-Point Flute for Through Holes
	Thread Size	Thread Lg.	Overall Lg.	Thread Type	Size	Decimal Size Equiv.	Shank Type	Chamfer Type	No. of Flutes		Each
High-Speed Steel







				Uncoated

				1-72	3/8"	1 11/16"	UNF	53 Ga.	0.0595"	Square	Plug	2	2523A462	000000




						Titanium Nitride (TiN) Coated

						1-72	3/8"	1 11/16"	UNF	53 Ga.	0.0595"	Square	Plug	2	2762A32	00000




								Titanium Carbon Nitride (TiCN) Coated

								1-72	3/8"	1 11/16"	UNF	53 Ga.	0.0595"	Square	Plug	2	2568A312	00000