Made of a high-vanadium alloy, these taps are harder and more wear-resistant than other high-speed steel taps. The widely spaced flutes prevent buildup that can ruin threads and keep pipe and conduit from making strong connections. Also known as interrupted-thread taps.

Slightly hooked cutting teeth grab and remove long chips from the hole. These taps prevent buildup from soft metals that can ruin threads and keep pipe and conduit from making strong connections.

Reach into the deep recesses of your system and bypass obstructions to thread pipe and conduit. These are twice as long as standard taps but with the same shank diameter, so you don’t need a different holder. They have straight flutes that are good for most jobs.

With widely spaced flutes, chips fall away from the tap and plenty of lubricant flows to the workpiece. These taps prevent buildup that can ruin threads and keep pipe and conduit from making strong connections. Also known as interrupted-thread taps.

Cut threads inside pipe and conduit 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches to cut material quickly. Your wrench’s rapid hammering keeps these taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. This also means the tap is less likely to jam on chips and snap.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench. You can also get chucks for impact drivers (sold separately).