How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
FM-Approved Iron Pipe Fittings with Flanged Ends
FM approved, these fittings are suitable for use in fire-protection systems. All have flat-surface flanged ends that only mate to another same-size flat-surface flange, pump, or valve with a gasket (sold separately) to create an access point in a pipeline. Use them in noncorrosive areas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Specifications Met: FM Approved, UL Listed, ASTM A126, ASTM B307, Fed. Spec. WW-F-406, ASME B16.1, ASME B1.20.1
- Pipe Nipples and Pipe: Use Schedule 40 steel
- Flanges: Use Class 150 steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size  | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
| 2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 150 psi @ 72° F | 125 psi @ 350° F | Iron | 0000000 | 0000000 |
| 2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | 150 psi @ 72° F | 125 psi @ 350° F | Iron | 0000000 | 000000 |
| 3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | 150 psi @ 72° F | 125 psi @ 350° F | Iron | 0000000 | 000000 |
| 4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | 150 psi @ 72° F | 125 psi @ 350° F | Iron | 0000000 | 000000 |
Ultra-High-Vacuum Flanges and Fittings for Stainless Steel Tubing
- For Use With: Air
- Temperature Range:
Flanges: -300° to 800° F
Gaskets: Not Rated - Tubing: Use with 304/304L and 316/316L stainless steel
- Specifications Met:
Flanges: ASTM A240, ASTM E45, ASTM E12
Gaskets: ASTM B152-179, ASTM F68
Create access points in ultra-high-vacuum lines or chambers by bolting two same-size flanges together with a copper gasket (sold separately) between them. The flanges’ sharp edges dig into the copper gasket and form an extremely tight seal, which means they handle higher vacuum pressures than other high-vacuum fittings with rubber gaskets. Also known as CF, Conflat, and UHV fittings, use them in vacuum coating, heat treating, and drying applications, as well as for leak testing and analyzing gases. They’re stainless steel so they resist rusting.
Fittings with a rotating flange turn so you can easily match up the bolt holes with another flange that may be misaligned.
Bolt kits are required to make a complete connection.
For technical drawings and 3-D models, click on a part number.
Bolt Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | Flange OD | High-Vacuum Flange Size | High Vacuum Connection Type | Bolt Circle Dia. | Dia. | No. of | Bolts Included | No. of Bolt Kits Required | Max. Vacuum | Material | Appearance | Each | |
Fixed × Rotating × Rotating | |||||||||||||
| 3/4" | 1 21/64" | 16 | CF | 1 1/16" | 11/64" | 6 | No | 3 | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 0000000 |
| 1 1/2" | 2 3/4" | 40 | CF | 2 5/16" | 17/64" | 6 | No | 3 | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 000000 |
| 2 1/2" | 4 1/2" | 63 | CF | 3 5/8" | 21/64" | 8 | No | 3 | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 000000 |
| 4" | 6" | 100 | CF | 5 1/8" | 21/64" | 16 | No | 6 | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 000000 |
| For Flange OD | For High-Vacuum Flange Size | Bolt Dia. | Thread Size | No. of Bolts Included | No. of Nuts Included | No. of Washers Included | Bolt Material | Each | |
| 1 21/64" | 16 | 0.164" | 8-32 | 6 | 6 | 12 | 18-8 Stainless Steel | 0000000 | 00000 |
| 2 3/4" | 40 | 1/4" | 1/4"-28 | 6 | 6 | 12 | 18-8 Stainless Steel | 0000000 | 00000 |
| 4 1/2" | 63 | 5/16" | 5/16"-24 | 8 | 8 | 16 | 18-8 Stainless Steel | 0000000 | 00000 |
| 6" | 100 | 5/16" | 5/16"-24 | 16 | 16 | 32 | 18-8 Stainless Steel | 0000000 | 00000 |