Telescoping Extension Ladders
Get multiple heights in one ladder—these ladders extend and lock in 1-ft. increments to give you the exact height you need. When closed, they're small enough to fit in a job bag for easy transport and compact storage. To close, pinch tabs on the second rung to release the locking mechanism, and then slide each section down one by one.
ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders. Type 1 ladders are tested to hold up to 250 lbs. Type 1A ladders are tested to hold up to 300 lbs.
Note: Check local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed.
Telescoping Multifunction Ladders
These ladders have movable sections that extend and collapse into one another so you can adjust them to the height you need. Configure them into step ladders, straight ladders, stairwell ladders, or scaffolding stands. When used as scaffolding stands, 12" wide planks (not included) must be placed 3 feet from the ladder base.
Aluminum ladders are lighter than fiberglass, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders.
Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Scaffold brackets (sold separately) are required to use these ladders as scaffolding stands.
Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed when used as a straight ladder. Ladders also meet CAL-OSHA standards, which is required for use in California.
Step | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Ht. (Ladder Configuration) | Overall Wd. | No. of Steps | Material | Tread | Wheel Configuration | Specifications Met | Each | |
Aluminum  | ||||||||
Type 1A (300-lb. Cap.) | ||||||||
| 6 ft.-11 ft. (Step), 13 ft.-23 ft. (Straight), 6 ft. (Scaffold) | 29" | 22 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 0000000 |
Type 1AA (375-lb. Cap.) | ||||||||
| 4 ft.-7 ft. (Step), 8 ft.-14 ft. (Straight), 4 ft. (Scaffold) | 24" | 14 | Aluminum | Ribbed | __ | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 000000 |
| 5 ft.-9 ft. (Step), 10 ft.-18 ft. (Straight), 5 ft. (Scaffold) | 27" | 18 | Aluminum | Ribbed | __ | ANSI A14.2, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 000000 |
Fiberglass | ||||||||
Type 1A (300-lb. Cap.) | ||||||||
| 3 ft.-5 ft. (Step), 6 ft.-10 ft. (Straight), 3 ft. (Scaffold) | 29" | 10 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 000000 |
| 5 ft.-9 ft. (Step), 11 ft.-19 ft. (Straight), 5 ft. (Scaffold) | 29" | 18 | Aluminum | Ribbed | Two Rigid Casters | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053, OSHA Compliant 29 CFR 1926.451, OSHA Compliant 29 CFR 1926.452, Cal/OSHA Compliant Title 8 Section 3276 | 0000000 | 000000 |
| Scaffold Brackets for Fiberglass Ladders | 0000000 | Pair | 000000 |
Foldaway Stairs
Extend these stairs out to reach a storage or work area, then fold them flat against the wall when you’re done. The handrail locks onto the stairs to keep them from folding while you climb. Made of steel, they’re durable enough to withstand heavy use. Their powder coating helps prevent rust. Serrated steps prevent slipping and allow liquids and dirt to pass through. All include a mounting bracket that you can weld or bolt to your surface.
Extend manual stairs by pumping a lever. Push them flat to store.
Electric stairs extend or retract with the push of a button. To power, plug them into a standard 120V AC outlet.
Note: Stairs meet OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | Step | Handrail | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Landing Ht. (A), ft. | Wd. | Dp. (B) | Climbing Angle | No. of Steps | Wd. | Dp. | Tread | Cap., lbs. | Ht. | Color | Motor Input Voltage | Plug Type | Mounting Hardware Included | Assembled or Unassembled | Specifications Met | Each | |
Blue Powder-Coated Steel | |||||||||||||||||
Manual | |||||||||||||||||
| 5 | 33" | 43" | 58° | 7 | 24 1/4" | 7" | Serrated | 350 | 31 1/2" | Yellow | __ | __ | No | Unassembled | OSHA Compliant 29 CFR 1910.25 | 0000000 | 000000000 |
| 6 | 33" | 50" | 58° | 8 | 24 1/4" | 7" | Serrated | 350 | 31 1/2" | Yellow | __ | __ | No | Unassembled | OSHA Compliant 29 CFR 1910.25 | 0000000 | 00000000 |
| 7 | 33" | 58" | 58° | 9 | 24 1/4" | 7" | Serrated | 350 | 31 1/2" | Yellow | __ | __ | No | Unassembled | OSHA Compliant 29 CFR 1910.25 | 0000000 | 00000000 |
| 8 | 33" | 65" | 58° | 10 | 24 1/4" | 7" | Serrated | 350 | 31 1/2" | Yellow | __ | __ | No | Unassembled | OSHA Compliant 29 CFR 1910.25 | 0000000 | 00000000 |
| 9 | 33" | 73" | 58° | 11 | 24 1/4" | 7" | Serrated | 350 | 31 1/2" | Yellow | __ | __ | No | Unassembled | OSHA Compliant 29 CFR 1910.25 | 0000000 | 00000000 |
| 10 | 33" | 80" | 58° | 13 | 24 1/4" | 7" | Serrated | 350 | 31 1/2" | Yellow | __ | __ | No | Unassembled | OSHA Compliant 29 CFR 1910.25 | 0000000 | 00000000 |
Electric | |||||||||||||||||
| 9 | 32" | 73" | 58° | 11 | 23 5/8" | 7" | Serrated | 350 | 32" | Yellow | 120V AC | Three Prong | No | Unassembled | OSHA Compliant 29 CFR 1910.25 | 0000000 | 00000000 |