McMaster-Carr logo
    Filter by
    Mounting Location
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Mounting Hole Diameter
    Specifications Met
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    108 Products

    Heavy Duty Ball-Grip Positioning Arms

    Image of System. Arm Built with Base, Two Straight Connectors, Straight Link, Locking Handle, and Sensor Mount. Front orientation. Exploded view. Positioning Arms. Heavy Duty Ball-Grip Positioning Arms .

    Arm Built with Base, Two Straight

    Connectors, Straight Link, Locking

    Handle, and Sensor Mount

    With strength for higher load capacities than other ball-grip positioning arms, these arms have a heavy duty construction. Ball-and-socket connections allow 360° positioning. The base, connectors, and links are hollow for routing wires, cables, and small hoses. Select a base, connectors, link, and plate or mount to build a complete arm. Capacities are based on an assembled arm that is 1 foot long.
    Telescoping Links
    Image of Product. Front orientation. Positioning Arms. Heavy Duty Ball-Grip Positioning Arms , Telescoping Links.
    Dia.
    ID
    Lg.
    Max. Load
    Cap., lb.
    Material
    Color
    Includes
    Each
    Rotate, Tilt, Side to Side, In/Out
    1 3/8"5/8"6 3/4" to 10 3/4"30Anodized AluminumBlueAdjustable Handle1530N340000000
     

    Prop Rods

    Image of Product. Front orientation. Prop Rods.
    Commonly used on hood and trunk lids, these simple three-piece rods telescope from 18 1/2" to 46 3/4" to prop lids open at a variety of angles. A rubber tip at each end protects your surfaces from damage.
    Lg.
    Dia.
    Material
    Color
    Each
    18 1/2" to 46 3/4"3/4" to 1 11/16"Powder-Coated SteelBlack6211N14000000

    Forklift Booms

    Image of ProductInUse. Shown Installed on Forklift. Front orientation. Forklift Booms. Forklift Booms.

    Shown Installed on Forklift

    Slide these booms onto forklift forks to handle long, cumbersome loads. They secure to the forklift carriage with the included safety chains. These booms are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.
    Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.
    Warning: Never use to lift people or items over people.
    Forklift Booms
    Image of Product. Style B. Front orientation. Style B. Forklift Booms.
    Image of Product. Style C. Front orientation. Style C. Forklift Booms.

    Style B

    Style C

    Image of Product. Style D. Front orientation. Contains Annotated, Inset. Style D. Forklift Booms.

    Style D

    Horizontally Telescoping—Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas.
    Vertically-Adjustable Boom—Those that also adjust vertically move in and out and up and down for the most flexible load placement. To access tall loads, raise the hook position and lock the boom into place with the pin.
    Style C—Styles C and G are designed for tall loads where more bottom clearance is needed. The fixed section has three hook positions spaced 6” apart.
    Wt. Cap., lb.
    For
    Max. Fork
    Hook
    Style
    @ 3
    ft.
    @ 4
    ft.
    @ 5
    ft.
    @ 6
    ft.
    @ 7
    ft.
    @ 8
    ft.
    @ 9
    ft.
    @ 10
    ft.
    @ 11
    ft.
    @ 12
    ft.
    @ 66
    In.
    Fork Pocket Spacing
    Ctr.-to-Ctr.
    For Min.
    Fork Lg.
    Wd.
    Ht.
    Material
    Type
    Movement
    Opening
    Wd.
    First Hook
    Position, ft.
    Lg., ft.
    Country of
    Origin
    Each
    Horizontally Telescoping
    B4,0003,7003,5003,2003,0002,7002,5002,2002,0001,700—24"24"7 1/2"2 1/2"Painted SteelLatching
    Grab    		Swivel
    Rigid    		1"
    5/8"    		37 1/2 to 12 1/2United States3638T112000000000
    B6,0005,0004,5004,0003,5003,0002,6002,3002,0001,800—24"24"7 1/4"2 1/4"Painted SteelLatching
    Latching    		Swivel
    Swivel    		1"
    1"    		37 1/2 to 12 1/2United States3638T11300000000
    B8,0006,6006,0005,3004,6004,0003,5003,0002,6002,200—24"24"7 1/4"2 1/4"Painted SteelLatching
    Latching    		Swivel
    Swivel    		1"
    1 1/4"    		37 to 12 1/2United States3638T11400000000
    C3,7003,2002,7002,2001,700—————2,50024"24"7 1/2"2 1/2"Painted SteelLatching
    Grab    		Swivel
    Rigid    		1"
    5/8"    		2 1/24 1/2 to 8United States3638T11500000000
     
    Horizontally Telescoping, Vertically Adjustable (37° Maximum Lifting Angle)
    D4,0003,7003,5003,2003,0002,7002,5002,2002,0001,700—24"24"7 1/2"2 1/2"Painted SteelLatching
    Grab    		Swivel
    Rigid    		1"
    5/8"    		37 1/2 to 12 1/2United States3638T11600000000
    D6,0005,0004,5004,0003,5003,0002,6002,3002,0001,800—24"24"7 1/4"2 1/4"Painted SteelLatching
    Latching    		Swivel
    Swivel    		1"
    1"    		37 1/2 to 12 1/2United States3638T11700000000
    D8,0006,6006,0005,3004,6004,0003,5003,0002,6002,200—24"24"7 1/4"2 1/4"Painted SteelLatching
    Latching    		Swivel
    Swivel    		1"
    1 1/4"    		37 to 12 1/2United States3638T11800000000
     
    Replacements for Forklift Booms
    Replacement Safety-Pin Shackles
    Image of Product. Front orientation. Contains Annotated. Shackles.
    A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
    Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.
    Wt. Cap.,
    lb.
    Thk.
    Pin
    Dia.
    Opening
    Wd.
    Inside
    Lg.
    Inside
    Wd.
    Specs. Met
    Mil. Spec.
    Each
    Galvanized Steel
    4,4001/2"21/32"13/16"1 29/32"1 5/16"ASME B30.26Fed. Spec. RR-C-2713555T51000000
    7,1005/8"25/32"1 1/16"2 13/32"1 23/32"ASME B30.26Fed. Spec. RR-C-2713555T5200000
    10,4003/4"29/32"1 1/4"2 13/16"2"ASME B30.26Fed. Spec. RR-C-2713555T5300000
     
    Replacement Hooks with Swivel
    Image of Product. Front orientation. Hooks.
    Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
    Note: Capacities are for vertical lifting only.
    Hook
    Eye
    Wt. Cap.,
    lb.
    Opening
    Wd.
    Usable
    Lg.
    ID
    Thk.
    Specs. Met
    For Use With
    Each
    4,4001 1/16"6 1/8"1 3/4"5/8"ASME B30.10Chain, Wire Rope3525T6130000000
    6,6001 3/16"6 1/2"1 3/4"5/8"ASME B30.10Chain, Wire Rope3525T614000000
    11,0001 1/2"7 1/2"2"3/4"ASME B30.10Chain, Wire Rope3525T615000000
    Replacement Latch Kits for Hooks
    Image of Product. Front orientation. Exploded view. Hook Latches. Forklift Booms.
    Includes
    Each
    Latch, Spring, Nut and Bolt35315T43000000
    Latch, Spring, Nut and Bolt35315T4400000
    Latch, Spring, Nut and Bolt35315T4500000
    Caldwell Forklift Booms
    Image of Product. Style F. Front orientation. Style F. Forklift Booms.
    Image of Product. Style G. Front orientation. Style G. Forklift Booms.

    Style F

    Style G

    Image of Product. Style H. Front orientation. Contains Annotated, Inset. Style H. Forklift Booms.
    Image of Product. Front orientation. Forklift Boom Pin Housings.

    Style H

    Replacement Pin

    Housing Rebuild

    Kits

    Image of Product. Front orientation. Clevis Pins. Forklift Booms.

    Replacement Pull Pins

    Horizontally Telescoping—Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas.
    Vertically-Adjustable Boom—Those that also adjust vertically move in and out and up and down for the most flexible load placement. To access tall loads, raise the hook position and lock the boom into place with the pin.
    Style G—Styles C and G are designed for tall loads where more bottom clearance is needed. The fixed section has three hook positions spaced 6” apart.
    Forklift Booms
    Replacement Pin
    Housing Rebuild Kits
    Replacement
    Pull Pins
    Wt. Cap., lb.
    For
    Max. Fork
    Hook
    Style
    @ 3
    ft.
    @ 4
    ft.
    @ 5
    ft.
    @ 6
    ft.
    @ 7
    ft.
    @ 8
    ft.
    @ 9
    ft.
    @ 10
    ft.
    @ 11
    ft.
    @ 12
    ft.
    Fork Pocket Spacing
    Ctr.-to-Ctr.
    For Min.
    Fork Lg.
    Wd.
    Ht.
    Material
    Type
    Movement
    Opening
    Wd.
    First Hook
    Position, ft.
    Lg.,
    ft.
    Country of
    Origin
    Each
    Each
    Each
    Horizontally Telescoping
    F4,0004,0004,0004,0003,2002,6002,2001,9001,6001,50015"30"7 1/2"2 1/2"Painted SteelLatchingSwivel1 1/16"37 to 12United States3638T220000000003638T420000000———0
    F6,0006,0006,0006,0005,0004,2003,5003,0002,7002,50015"30"7 1/2"2 1/2"Painted SteelLatchingSwivel1 5/16"37 to 12United States3638T27000000003638T42000000———0
    F8,0008,0008,0008,0007,0005,7004,8004,1003,6003,10015"30"7 1/2"2 1/2"Painted SteelLatchingSwivel1 9/16"37 to 12United States3638T24000000003638T42000000———0
    G4,0004,0003,5001,800——————12 1/2"30"7 1/2"2 1/2"Painted SteelLatchingSwivel1 1/16"2 1/24 to 6United States3638T41000000003638T42000000———0
     
    Horizontally Telescoping, Vertically Adjustable (40° Maximum Lifting Angle)
    H4,0004,0004,0004,0003,2002,6002,2001,9001,6001,50015"30"7 1/2"2 1/2"Painted SteelLatchingSwivel1 1/16"37 to 12United States3638T25000000003638T420000003638T430000000
    H6,0006,0006,0006,0005,0004,2003,5003,0002,7002,50015"30"7 1/2"2 1/2"Painted SteelLatchingSwivel1 5/16"37 to 12United States3638T32000000003638T420000003638T43000000
    H8,0008,0008,0008,0007,0005,7004,8004,1003,6003,10015"30"7 1/2"2 1/2"Painted SteelLatchingSwivel1 9/16"37 to 12United States3638T33000000003638T420000003638T43000000
     
    Replacements for Forklift Booms
    Replacement Safety-Pin Shackles
    Image of Product. Front orientation. Contains Annotated. Shackles.
    A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
    Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.
    Wt. Cap.,
    lb.
    Thk.
    Pin
    Dia.
    Opening
    Wd.
    Inside
    Lg.
    Inside
    Wd.
    Specs. Met
    Mil. Spec.
    Each
    Galvanized Steel
    4,4001/2"21/32"13/16"1 29/32"1 5/16"ASME B30.26Fed. Spec. RR-C-2713555T51000000
    7,1005/8"25/32"1 1/16"2 13/32"1 23/32"ASME B30.26Fed. Spec. RR-C-2713555T5200000
    10,4003/4"29/32"1 1/4"2 13/16"2"ASME B30.26Fed. Spec. RR-C-2713555T5300000
     
    Replacement Hooks with Swivel
    Image of Product. Front orientation. Hooks.
    Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
    Note: Capacities are for vertical lifting only.
    Hook
    Eye
    Wt. Cap.,
    lb.
    Opening
    Wd.
    Usable
    Lg.
    ID
    Thk.
    Specs. Met
    For Use With
    Each
    4,4001 1/16"6 1/8"1 3/4"5/8"ASME B30.10Chain, Wire Rope3525T6130000000
    6,6001 3/16"6 1/2"1 3/4"5/8"ASME B30.10Chain, Wire Rope3525T614000000
    11,0001 1/2"7 1/2"2"3/4"ASME B30.10Chain, Wire Rope3525T615000000
    Replacement Latch Kits for Hooks
    Image of Product. Front orientation. Exploded view. Hook Latches. Forklift Booms.
    Includes
    Each
    Latch, Spring, Nut and Bolt35315T43000000
    Latch, Spring, Nut and Bolt35315T4500000
    Latch, Spring, Nut and Bolt35315T4400000

    Tapered Pole Handles

    Telescoping Fiberglass Handle
    Image of Product. Front orientation. Pole Handles. Tapered Pole Handles, Fiberglass Handle.
    Telescoping fiberglass handles are hygienic.
    Handle
    Lg.,
    ft.
    Dia.
    Color
    Adapter
    Material
    Adapter
    Color
    Inner Tube
    Material
    Each
    2 to 41 1/16"YellowPlasticBlackAluminum
    		58905T81000000
    4 to 81 1/16"YellowPlasticBlackAluminum
    		58905T8200000
    6 to 121 1/16"YellowPlasticBlackAluminum
    		58905T8700000
    6 to 181 1/4"YellowPlasticBlackAluminum
    		58905T8500000
    8 to 151 1/16"YellowPlasticBlackAluminum
    		58905T8400000
    8 to 221 1/4"YellowPlasticBlackAluminum
    		58905T8600000

    Battery-Powered Forklift Booms

    Image of Product. Front orientation. Forklift Booms. Battery-Powered Forklift Booms .
    No more manually tugging and shoving your boom into position—just push a button and the battery-powered hydraulic pump precisely extends and retracts these booms for you. For loads up to 2,000 lbs., you can even move these booms with your load suspended from them. For heavier loads, you’ll need to position them first and then attach your load, but it’s still faster and more precise than manual booms. Operate these booms from a safe distance using the pendant switch.
    Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. A forklift with an 8,000 lb. rating is required. Check with the manufacturer of your forklift for load capabilities before using.
    Warning: Never use to lift people or items over people.
    Horizontally-Telescoping Boom
    Image of Product. Back orientation. Horizontally-Telescoping Boom. Battery-Powered Forklift Booms , Pendant Switch on 8-ft. Cord.

    Pendant Switch on 8-ft. Cord

    Wt. Cap., lb.
    For
    Max. Fork
    Hook
    @ 3
    ft.
    @ 4
    ft.
    @ 5
    ft.
    @ 6
    ft.
    @ 7
    ft.
    @ 8
    ft.
    @ 9
    ft.
    @ 10
    ft.
    @ 11
    ft.
    @ 12
    ft.
    Cap. while Adjusting
    Lg., lb.
    Fork Pocket Spacing
    Ctr.-to-Ctr.
    For Min.
    Fork Lg.
    Wd.
    Ht.
    Material
    Type
    Movement
    Opening
    Wd.
    First Hook
    Position, ft.
    Lg.,
    ft.
    Batteries
    Included
    Battery Charger
    Included
    Country of
    Origin
    Each
    Pendant Switch on 8-ft. Cord
    8,0006,6006,0005,3004,6004,0003,5003,0002,6002,2002,00024"24"7 1/4"2 1/4"Painted SteelLatchingSwivel1", 1 1/4"37 to 12YesYesUnited States8749N11000000000
     

    Compact Forklift Booms

    Image of ProductInUse. Shown Installed on a Forklift. Front orientation. Forklift Booms. Compact Forklift Booms .

    Shown Installed on a Forklift

    Image of Product. Front orientation. Forklift Booms. Compact Forklift Booms , Horizontally Telescoping.

    Horizontally Telescoping

    Designed for moving loads in cramped warehouses, these booms collapse to a smaller size than standard booms. You can also extend them to carry long loads or place items in hard-to-reach spots. Slide your forks into the pockets and secure to your carriage with the included chain.
    These booms are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.
    Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.
    Warning: Never use to lift people or items over people.
    Wt. Cap., lb.
    For
    Max. Fork
    Hook
    @ 31
    In.
    @ 37
    In.
    @ 43
    In.
    @ 52
    In.
    @ 64
    In.
    @ 66
    In.
    @ 76
    In.
    @ 79
    In.
    @ 89
    In.
    @ 92
    In.
    Fork Pocket Spacing
    Ctr.-to-Ctr.
    For Min.
    Fork Lg.
    Wd.
    Ht.
    Material
    Type
    Movement
    Opening
    Wd.
    First Hook
    Position
    Lg., ft.
    Country of
    Origin
    Each
    Horizontally Telescoping
    4,0003,8003,7003,500—3,200—3,000—2,70024"24"7 1/2"2 1/2"Painted SteelLatching
    Grab    		Swivel
    Rigid    		1"
    5/8"    		31"4 1/2 to 8United States3638T119000000000
    6,0005,7005,4004,900—4,300—3,600—3,00024"24"7 1/4"2 1/4"Painted SteelLatchingSwivel1"31"4 1/2 to 8United States3638T12100000000
    8,0007,6007,2006,6005,800—5,000—4,200—24"24"7 1/4"2 1/4"Painted SteelLatching
    Latching    		Swivel
    Swivel    		1"
    1 1/4"    		31"4 1/2 to 7 1/2United States3638T12200000000
     
    Replacements for Forklift Booms
    Replacement Safety-Pin Shackles
    Image of Product. Front orientation. Contains Annotated. Shackles.
    A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
    Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.
    Wt. Cap.,
    lb.
    Thk.
    Pin
    Dia.
    Opening
    Wd.
    Inside
    Lg.
    Inside
    Wd.
    Specs. Met
    Mil. Spec.
    Each
    Galvanized Steel
    4,4001/2"21/32"13/16"1 29/32"1 5/16"ASME B30.26Fed. Spec. RR-C-2713555T51000000
    7,1005/8"25/32"1 1/16"2 13/32"1 23/32"ASME B30.26Fed. Spec. RR-C-2713555T5200000
    10,4003/4"29/32"1 1/4"2 13/16"2"ASME B30.26Fed. Spec. RR-C-2713555T5300000
     
    Replacement Hooks with Swivel
    Image of Product. Front orientation. Hooks.
    Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
    Note: Capacities are for vertical lifting only.
    Hook
    Eye
    Wt. Cap.,
    lb.
    Opening
    Wd.
    Usable
    Lg.
    ID
    Thk.
    Specs. Met
    For Use With
    Each
    4,4001 1/16"6 1/8"1 3/4"5/8"ASME B30.10Chain, Wire Rope3525T6130000000
    6,6001 3/16"6 1/2"1 3/4"5/8"ASME B30.10Chain, Wire Rope3525T614000000
    11,0001 1/2"7 1/2"2"3/4"ASME B30.10Chain, Wire Rope3525T615000000

    Hydraulic Cranes

    Image of Product. Front orientation. Cranes. Hydraulic Cranes .
    Also known as engine cranes, a hydraulic hand pump raises and lowers the arm (boom) to lift items without the need for a hoist.
    Warning: Never use to lift people or items over people.
    Overall
    Arm Lg.
    Retracted Arm
    Wt. Cap.
    Extended Arm
    Wt. Cap.
    Clearance
    Distance Between
    Legs
    Lg.
    Wd.
    Ht.
    Crane Beam
    Type
    Hook
    Type
    Hook
    Material
    Hook
    Movement
    Hook Opening
    Wd.
    Wheel Configuration
    Brake Type
    Wheel
    Material
    Specs. Met
    Each
    Steel
    35" to 47"1/4 ton, 500 lb.1/8 ton, 350 lb.15" to 84"24"53"32"56"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWithout BrakePhenolicANSI/NEMA Z5353237T31000000000
    45" to 57"1/2 ton, 1,000 lb.1/8 ton, 450 lb.16" to 104"24"53"35"6 ft.OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWithout BrakePhenolicANSI/NEMA Z5353237T3200000000
    55" to 96"1 ton, 2,000 lb.1/8 ton, 300 lb.1 5/8" to 119"26"70"34"76"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWithout BrakePhenolicANSI/NEMA Z5353237T3300000000
    57" to 89"1 1/2 ton, 3,000 lb.1/4 ton, 500 lb.26" to 106"26"79"35"75"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWithout BrakeSteelANSI/NEMA Z5353237T3400000000
     

    Electric Winch Cranes

    No hand-cranking needed—simply push a button on the handheld control to lift or lower a heavy load. These cranes are also known as davit cranes. The automatic brake holds your load securely in place when you’re not moving it up or down. For precise positioning in all directions, these cranes rotate a full 360°. The arm can be adjusted to four different heights depending on your needs.
    Note: Capacity is highest for the first layer of rope and decreases as each additional layer of rope is wound on the winch. There are at least five wraps of rope on the winch.
    Warning: Never use to lift people or items over people.
    Electric-Powered with 3-Blade Plug (120V AC)
    Image of Product. Front orientation. Cranes. Electric Winch Cranes , Electric.
    Electric-powered cranes work well for long-running jobs because there’s no battery to worry about. They plug into an electrical outlet.
    Floor Mount
    (Surface)
    Floor Mount
    (Flush)
    Wall Mount
    (Surface)
    Wt. Cap.
    Fully Wound
    Wt. Cap., lb.
    Arm Lg.
    Lift Lg.,
    ft.
    Lifting
    Speed, fpm
    Overall
    Ht.
    Hook
    Movement
    Fasteners
    Included
    Each
    Each
    Each
    Zinc-Plated Steel with Galvanized Steel Wire Rope
    500 lb.50028" to 42"901650" to 77"360° SwivelYes7567N110000000007567N120000000007567N13000000000
    550 lb. to 1,000 lb. 55028" to 42"451646" to 76"360° SwivelYes7567N17000000007567N18000000007567N1900000000
     
    Accessories and Replacements for Cranes
    Winches
    Image of Product. Front orientation. Winches. Electric Winch Cranes , Electric.
    Power
    Source
    Operation
    Type
    Voltage,
    V AC
    Each
    ElectricButton1207567N310000000
    Crane Bases
    Image of Product. Front orientation. Crane Bases. Electric Winch Cranes , Floor Mount (Surface).
    Image of Product. Front orientation. Crane Bases. Electric Winch Cranes , Floor Mount (Flush).
    Image of Product. Front orientation. Crane Bases. Electric Winch Cranes , Wall Mount (Surface).

    Floor Mount

    (Surface)

    Floor Mount

    (Flush)

    Wall Mount

    (Surface)

    Install additional bases throughout your facility to make it easy to use your crane in different spots. Make sure the maximum capacity of your crane matches the capacity of the base you choose.
    Floor Mount
    (Surface)
    Floor Mount
    (Flush)
    Wall Mount
    (Surface)
    For Wt.
    Cap., lb.
    Each
    Each
    Each
    Powder-Coated Steel
    5007567N2400000007567N2500000007567N260000000
    1,0007567N270000007567N280000007567N29000000
     
    Crane Headache Balls
    Image of Product. Front orientation. Crane Headache Balls. Electric Winch Cranes .
    Headache balls keep the cable taut when there’s no load, making the crane more stable for safety.
    Material
    Each
    Powder-Coated Steel7567N330000000
    Battery-Powered with Wire Leads (12V DC)
    Image of Product. Front orientation. Cranes. Electric Winch Cranes , Battery Powered.
    Battery-powered cranes work in locations without electrical outlets. Use the wire leads to connect them to a 12V DC battery (not included).
    Floor Mount
    (Surface)
    Floor Mount
    (Flush)
    Wall Mount
    (Surface)
    Wt. Cap.
    Fully Wound
    Wt. Cap., lb.
    Arm Lg.
    Lift Lg.,
    ft.
    Lifting
    Speed, fpm
    Overall
    Ht.
    Current,
    amp
    Hook
    Movement
    Batteries
    Included
    Fasteners
    Included
    Each
    Each
    Each
    Zinc-Plated Steel with Galvanized Steel Wire Rope
    500 lb.50028" to 42"90850" to 77"70360° SwivelNoYes7567N140000000007567N150000000007567N16000000000
    550 lb. to 1,000 lb. 55028" to 42"45846" to 76"70360° SwivelNoYes7567N21000000007567N22000000007567N2300000000
     
    Accessories and Replacements for Cranes
    Winches
    Image of Product. Front orientation. Winches. Electric Winch Cranes , Battery Powered.
    Power
    Source
    Operation
    Type
    Voltage,
    V DC
    Each
    BatteryButton127567N320000000
    Crane Bases
    Image of Product. Front orientation. Crane Bases. Electric Winch Cranes , Floor Mount (Surface).
    Image of Product. Front orientation. Crane Bases. Electric Winch Cranes , Floor Mount (Flush).
    Image of Product. Front orientation. Crane Bases. Electric Winch Cranes , Wall Mount (Surface).

    Floor Mount

    (Surface)

    Floor Mount

    (Flush)

    Wall Mount

    (Surface)

    Install additional bases throughout your facility to make it easy to use your crane in different spots. Make sure the maximum capacity of your crane matches the capacity of the base you choose.
    Floor Mount
    (Surface)
    Floor Mount
    (Flush)
    Wall Mount
    (Surface)
    For Wt.
    Cap., lb.
    Each
    Each
    Each
    Powder-Coated Steel
    5007567N2400000007567N2500000007567N260000000
    1,0007567N270000007567N280000007567N29000000
     
    Crane Headache Balls
    Image of Product. Front orientation. Crane Headache Balls. Electric Winch Cranes .
    Headache balls keep the cable taut when there’s no load, making the crane more stable for safety.
    Material
    Each
    Powder-Coated Steel7567N330000000

    Hand-Winch Cranes

    Also known as davit cranes, these lift objects out of holes such as sewers. An automatic brake holds your load securely when the handle is released.
    Warning: Never use to lift people or items over people.
    Stationary—Wire Rope Winch
    Image of Product. Style B. Front orientation. Style B. Hand-Winch Cranes .
    Image of Product. Style C. Front orientation. Style C. Hand-Winch Cranes .

    Style B

    Style C

    Powder-Coated Steel—Powder-coated steel cranes offer some corrosion resistance.
    Stainless Steel—Stainless steel cranes have the most corrosion resistance.
    Style
    Arm Lg.
    Retracted Arm
    Wt. Cap.
    Extended Arm
    Wt. Cap.
    Lift Lg.,
    ft.
    Overall
    Ht.
    Rotation
    Wire Rope
    Material
    Hook Material
    Hook Opening
    Wd.
    Hook
    Movement
    Base Material
    Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    Powder-Coated Steel
    B36" to 66"1/2 ton, 1,000 lb.1/4 ton, 500 lb.475 ft.360°Galvanized SteelSteel7/8"360° SwivelPowder-Coated SteelNo11/16"3276T104000000000
    B46" to 82"1 ton, 2,000 lb.1/2 ton, 1,100 lb.4564"360°Galvanized SteelSteel7/8"360° SwivelPowder-Coated SteelNo11/16"3276T20500000000
    C36" to 66"1/2 ton, 1,000 lb.1/4 ton, 500 lb.4746"360°Galvanized SteelSteel7/8"360° SwivelPowder-Coated SteelNo11/16"3276T11700000000
    C46" to 82"1 ton, 2,000 lb.1/2 ton, 1,100 lb.4564"360°Galvanized SteelSteel7/8"360° SwivelPowder-Coated SteelNo11/16"3276T21800000000
     
    Stainless Steel
    B36" to 66"1/2 ton, 1,000 lb.1/4 ton, 500 lb.475 ft.360°Stainless SteelStainless Steel
    		3/4"360° SwivelStainless SteelNo11/16"32525T7800000000
    B46" to 82"1 ton, 2,000 lb.1/2 ton, 1,100 lb.4561"360°Stainless SteelStainless Steel
    		3/4"360° SwivelStainless SteelNo11/16"32525T28900000000
     
    Accessories and Replacements for Cranes
    Crane Bases
    Install additional bases throughout your plant and move your hand-winch crane between them to use a single crane in multiple locations. They can also be used to replace existing bases.
    Mounting
    Plate
    Mounting
    Location
    For Retracted
    Arm Wt. Cap.
    For Extended
    Arm Cap.
    For Mast
    Dia.
    Base
    Ht.
    Mounting
    Hole Dia.
    Wd.
    Lg.
    Thk.
    Each
    Stationary—Powder-Coated Steel
    Floor1/2 ton, 1,000 lb.1/4 ton, 500 lb.3 1/2"14 3/8"11/16"15 7/8"15 7/8"3/8"3276T1510000000
    Floor1 ton, 2,000 lb.1/2 ton, 1,000 lb.4 1/2"14 3/8"11/16"15 7/8"15 7/8"1/2"3276T311000000
    Wall1/2 ton, 1,000 lb.1/4 ton, 500 lb.3 1/2"15 7/8"11/16"15 7/8"15 7/8"3/8"3276T157000000
     
    Stationary—Stainless Steel
    Floor1/2 ton, 1,000 lb.1/4 ton, 500 lb.3 1/2"14 3/8"11/16"15 7/8"15 7/8"3/8"3276T15200000000
    Floor1 ton, 2,000 lb.1/2 ton, 1,000 lb.4 1/2"14 3/8"11/16"15 7/8"15 7/8"1/2"3276T31200000000
    Wall1/2 ton, 1,000 lb.1/4 ton, 500 lb.3 1/2"15 7/8"11/16"15 7/8"15 7/8"3/8"3276T15800000000
     
    Crane Headache Balls
    Replacement headache balls keep cable taut when no load is attached.
    Material
    Each
    Steel3276T3160000000
    Stainless Steel3276T317000000
    Rolling with Two Swivel and Two Rigid Casters—Wire Rope Winch
    Image of Product. Style E. Front orientation. Style E. Hand-Winch Cranes .

    Style E

    Powder-Coated Steel—Powder-coated steel cranes offer some corrosion resistance.
    Style E—Styles D and E can be disassembled for convenient transport and storage.
    Style
    Arm Lg.
    Retracted Arm
    Wt. Cap.
    Extended Arm
    Wt. Cap.
    Lift Lg.,
    ft.
    Overall
    Ht.
    For Max. Opening
    Dia., ft.
    Wire Rope
    Material
    Hook
    Material
    Hook Opening
    Wd.
    Hook
    Movement
    Base Material
    Wheel
    Material
    Each
    Powder-Coated Steel
    E36" to 66"1/2 ton, 1,000 lb.1/4 ton, 500 lb.2366"3Galvanized SteelSteel7/8"360° SwivelPowder-Coated SteelRubber, Steel3276T129000000000
     
    Accessories and Replacements for Cranes
    Crane Bases
    Install additional bases throughout your plant and move your hand-winch crane between them to use a single crane in multiple locations. They can also be used to replace existing bases.
    Mounting
    Plate
    Mounting
    Location
    For Retracted
    Arm Wt. Cap.
    For Extended
    Arm Cap.
    For Mast
    Dia.
    Base
    Ht.
    Mounting
    Hole Dia.
    Wd.
    Lg.
    Thk.
    Each
    Stationary—Powder-Coated Steel
    Floor1/2 ton, 1,000 lb.1/4 ton, 500 lb.3 1/2"14 3/8"11/16"15 7/8"15 7/8"3/8"3276T1510000000
    Wall1/2 ton, 1,000 lb.1/4 ton, 500 lb.3 1/2"15 7/8"11/16"15 7/8"15 7/8"3/8"3276T157000000
     
    Crane Headache Balls
    Replacement headache balls keep cable taut when no load is attached.
    Material
    Each
    Steel3276T3160000000
    Stainless Steel3276T317000000

    Electric Motor-Driven Cranes

    Image of Attribute. Back orientation. Contains Annotated. Cranes. Electric Motor-Driven Cranes .
    From navigating around your facility to raising heavy loads, every movement these cranes make is fully powered. They have a battery-powered hydraulic pump that keeps movements consistent and controlled, including when you’re moving the arm in, out, up, and down to position loads. On a single charge, their battery lasts for four hours of continuous use or eight hours of intermittent use. Turn the throttle to adjust the speed of travel and push buttons to position the arm.
    To prevent collisions when moving these cranes in reverse, hit the emergency safety switch to quickly move them forward in the opposite direction. You can also sound the horn to alert people nearby. There’s no need to worry about them rolling away from you—an automatic brake stops them from moving as soon as you let go of the handle. Adjust the length of the legs to distribute loads more evenly, reducing the risk that these cranes will tip.
    Warning: Never use to lift people or items over people.
    Overall
    Retracted Arm
    Wt. Cap.
    Extended Arm
    Wt. Cap.
    Arm Lg.
    Clearance
    Distance Between
    Legs
    Lg.
    Wd.
    Ht.
    Hook
    Type
    Hook
    Movement
    Hook Opening
    Wd.
    Handle
    Ht.
    Voltage,
    V DC
    Specs. Met
    Each
    Yellow Powder-Coated Steel with Steel Hook
    1 1/4 ton, 2,500 lb.1/4 ton, 600 lb.30" to 94"22" to 110"23" to 28"79" to 103"30" to 35"66"Latching360° Swivel1 1/4"20 1/4"12ANSI/NEMA Z5357551N110000000000
     

    Temporary Partition Poles

    Image of System. Front orientation. Contains Annotated. Temporary Partition Poles.
    Use these telescoping poles with tarps, drop cloths, and plastic sheeting up to 8 mils thick to create a sturdy, temporary wall and control dust and debris. Poles have a head plate with a nonskid pad to protect your ceiling.
    Head
    Plate
    Ht.
    Wd.
    Dp.
    Material
    Includes
    Each
    57" to 144"5 3/4"2 3/4"Aluminum
    		Spring-Loaded Nonskid Head Plate, Rubber Foot7926T11000000
    Accessories for Temporary Partition Poles
    Dust Seal
    Replace head plates with dust seals for extra protection. These aluminum bars with foam padding press tightly to the ceiling.
    Lg.,
    ft.
    Material
    Features
    Each
    4Aluminum
    		Foam Padding7926T35000000
    Zippered Doorway Kit
    Zippered doorway kits include two zippers and a knife to cut sheeting. Use one zipper for a narrow opening; use both to create a larger, roll-up entryway.
    Lg.,
    ft.
    Mount Type
    Each
    7Adhesive Back7926T38000000

    Easy-Store Hydraulic Cranes

    Image of Product. Front orientation. Contains Annotated. Cranes. Easy-Store Hydraulic Cranes .
    Image of Product. Shown Folded. Front orientation. Contains Border. Cranes. Easy-Store Hydraulic Cranes .

    Shown Folded

    Fold these cranes for convenient transport and storage. Also known as engine cranes, a hydraulic hand pump raises and lowers the arm (boom) to lift items without the need for a hoist.
    Warning: Never use to lift people or items over people.
    Overall
    Arm Lg.
    Retracted Arm
    Wt. Cap.
    Extended Arm
    Wt. Cap.
    Clearance
    Distance Between
    Legs
    Lg.
    Wd.
    Ht.
    Crane Beam
    Type
    Hook
    Type
    Hook
    Material
    Hook
    Movement
    Hook Opening
    Wd.
    Wheel Configuration
    Brake Type
    Wheel
    Material
    Specs. Met
    Each
    Steel
    41" to 66"1/2 ton, 1,000 lb.1/8 ton, 450 lb.14" to 113"42"61"4 ft.71"OpenLatchingSteel360° Swivel1"Three Rigid Casters and Two Swivel CastersWithout BrakePhenolicANSI/NEMA Z5353733T35000000000
    54" to 95"1 ton, 2,000 lb.1/8 ton, 300 lb.8" to 128"45"78"51"75"OpenLatchingSteel360° Swivel1"Three Rigid Casters and Two Swivel CastersWithout BrakePhenolicANSI/NEMA Z5353733T3600000000
     

    Close-Lift Battery-Powered Cranes

    Image of ProductInUse. Front orientation. Cranes. Close-Lift Battery-Powered Cranes .
    Image of Attribute. Front orientation. Contains Annotated. Cranes. Close-Lift Battery-Powered Cranes .
    Position loads and maneuver with ease in tight spaces. Instead of long legs, these cranes are balanced with a counterweight in the back. The added room in front means you can push these cranes against surfaces to maximize the arm’s reach. No need for a hoist: a battery-powered hydraulic pump raises and lowers the arm to move loads. This means you can lift heavy parts regardless of whether an outlet’s nearby. To extend the reach of the arm – also known as the boom – manually adjust it between four positions. These cranes have an emergency stop button that quickly prevents them from moving any further if there's a risk of collision. Lock the caster wheels to keep them from rolling while lifting.
    Warning: Never use to lift people or items over people.
    Overall
    Arm Lg.
    Retracted Arm
    Wt. Cap.
    Extended Arm
    Wt. Cap.
    Clearance
    Lg.
    Wd.
    Ht.
    Crane Beam
    Type
    Hook
    Type
    Hook
    Material
    Hook
    Movement
    Hook Opening
    Wd.
    Wheel Configuration
    Brake Type
    Wheel Material
    Batteries
    Included
    Voltage,
    V DC
    Specs.
    Met
    Each
    Blue Painted Steel
    54" to 77"1/4 ton, 500 lb.1/8 ton, 300 lb.5" to 90"135"29"102"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWheel BrakeGlass-Filled NylonYes12ASME PASE7516N11000000000
    54" to 77"1/2 ton, 1,000 lb.1/4 ton, 500 lb.5" to 90"145"29"102"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWheel BrakeGlass-Filled NylonYes12ASME PASE7516N1200000000
    54" to 77"1 ton, 2,000 lb.1/2 ton, 1,000 lb.15" to 96"159"29"107"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWheel BrakeGlass-Filled NylonYes12ASME PASE7516N1300000000
     
    Cords
    An extension cord is required to recharge the battery.
    Male
    Connection
    Female
    Connection
    Cord
    End
    Type
    NEMA
    Type
    End
    Type
    NEMA
    Type
    Lg.,
    ft.
    Color
    AWG
    Current,
    amp
    Voltage,
    V AC
    OD
    Outer Jacket
    Material
    Cable
    Designation
    Certification
    Each
    Plug5-15
    		Socket5-15
    		6Black14
    		151250.38"PVC
    		SJTOW
    		UL Listed
    		9581T22000000

    Telescoping Hand-Winch Cranes

    Image of ProductInUse. Raise Arm with Ratchet Screw Jack. Side1 orientation. Contains Annotated. Cranes. Telescoping Hand-Winch Cranes .
    Image of ProductInUse. Adjust Arm Length with Power Drill or Handle (Drill Not Included). Side1 orientation. Contains Annotated. Cranes. Telescoping Hand-Winch Cranes .

    Raise Arm with Ratchet Screw Jack

    Adjust Arm Length with Power Drill or Handle

    (Drill Not Included)

    Image of Product. Front orientation. Cranes. Telescoping Hand-Winch Cranes .
    Adjust the arm in, out, up, and down even under load. These cranes are designed for precise positioning adjustments—no need to fully lower the arm and detach your load. For even more positioning flexibility in all directions, these cranes also rotate a full 360°. An automatic brake holds your load securely in place when you release the handle. To quicken your set up, use a power drill to wind the winch or lengthen the arm for you. Also known as davit cranes.
    Note: Capacity is highest for the first layer of rope and decreases as each additional layer of rope is wound on the winch. There are at least five wraps of rope on the winch.
    Warning: Never use to lift people or items over people.
    Floor Mount
    (Surface)
    Floor Mount
    (Flush)
    Wall Mount
    (Surface)
    Wt. Cap.
    Fully Wound
    Wt. Cap., lb.
    Arm Lg.
    Lift Lg.,
    ft.
    Overall
    Ht.
    Wire Rope
    Material
    Hook
    Movement
    Power Source
    Fasteners
    Included
    Features
    Each
    Each
    Each
    Zinc-Plated Steel
    500 lb.50024" to 66"8050" to 90"Galvanized Steel360° SwivelManual, Power ToolYesRatchet Screw Jack7604N110000000007604N120000000007604N13000000000
    550 lb. to 1,200 lb. 55023" to 66"5553" to 94"Galvanized Steel360° SwivelManual, Power ToolYesRatchet Screw Jack7604N14000000007604N15000000007604N1600000000
     
    Accessories for Cranes
    Winches
    Image of Product. Front orientation. Winches. Telescoping Hand-Winch Cranes , Electric.
    Image of Product. Front orientation. Winches. Telescoping Hand-Winch Cranes , Battery Powered.

    Electric

    Battery Powered

    Pair your crane with a powered winch to turn your manual winch into an electric one.
    Power
    Source
    Operation
    Type
    Voltage
    Each
    ElectricButton120V AC7567N310000000
    BatteryButton12V DC7567N32000000
    Crane Bases
    Image of Product. Front orientation. Crane Bases. Telescoping Hand-Winch Cranes , Floor Mount (Surface).
    Image of Product. Front orientation. Crane Bases. Telescoping Hand-Winch Cranes , Floor Mount (Flush).
    Image of Product. Front orientation. Crane Bases. Telescoping Hand-Winch Cranes , Wall Mount (Surface).

    Floor Mount

    (Surface)

    Floor Mount (Flush)

    Wall Mount

    (Surface)

    Install additional bases throughout your facility to use your crane in different spots.
    Floor Mount
    (Surface)
    Floor Mount
    (Flush)
    Wall Mount
    (Surface)
    For Min. Crane
    Wt. Cap., lb.
    For Wt.
    Cap., lb.
    Each
    Each
    Each
    Powder-Coated Steel
    —5007604N2100000007604N2200000007604N230000000
    5501,2007604N170000007604N180000007604N19000000
     
    Crane Headache Balls
    Image of Product. Front orientation. Crane Headache Balls. Telescoping Hand-Winch Cranes .
    Headache balls keep the cable taut when there’s no load, making the crane more stable.
    Material
    Each
    Powder-Coated Steel7567N330000000

    Close-Lift Hydraulic Cranes

    Image of Product. Front orientation. Contains Annotated. Cranes. Close-Lift Hydraulic Cranes .
    With no legs in front, these cranes let you lift close to your load. Also known as engine cranes, a hydraulic hand pump raises and lowers the arm (boom) to lift items without the need for a hoist.
    Warning: Never use to lift people or items over people.
    Crane Repair Kits—Repair kits contain hydraulic components subject to wear such as O-rings, gaskets, and seals.
    Cranes
    Crane
    Repair Kits
    Overall
    Arm Lg.
    Retracted Arm
    Wt. Cap.
    Extended Arm
    Wt. Cap.
    Clearance
    Lg.
    Wd.
    Ht.
    Crane Beam
    Type
    Hook
    Type
    Hook
    Material
    Hook
    Movement
    Hook Opening
    Wd.
    Wheel Configuration
    Brake Type
    Wheel
    Material
    Specs. Met
    Each
    Each
    Steel
    40" to 52"3/8 ton, 750 lb.1/4 ton, 500 lb.6" to 98"64"31"58"OpenLatchingSteel360° Swivel1"Four Rigid CastersWithout BrakePhenolicANSI/NEMA Z535, ASME PALD3255T101000000000———0
    44" to 62"1/4 ton, 500 lb.1/8 ton, 350 lb.9" to 104"90"31"59"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWithout BrakePhenolicANSI/NEMA Z535, ASME PALD3255T51000000003237T61000000
    44" to 62"1/2 ton, 1,000 lb.5/16 ton, 600 lb.6" to 104"104"31"67"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWithout BrakePhenolicANSI/NEMA Z535, ASME PALD3255T52000000003255T7100000
    45" to 86"3/4 ton, 1,500 lb.3/8 ton, 750 lb.10" to 114"79"33"77"OpenLatchingSteel360° Swivel1"Four Rigid CastersWithout BrakeSteelANSI/NEMA Z535, ASME PALD3255T10200000000———0
    52" to 91"1 ton, 2,000 lb.1/2 ton, 1,000 lb.8" to 138"124"31"76"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWithout BrakeIronANSI/NEMA Z535, ASME PALD3255T55000000003237T6200000
    52" to 91"1 ton, 2,000 lb.1/2 ton, 1,000 lb.8" to 138"124"31"76"OpenLatchingSteel360° Swivel1"Two Rigid Casters and Two Swivel CastersWithout BrakePhenolicANSI/NEMA Z535, ASME PALD3255T53000000003237T6200000
     
    back to top