Telescoping Robot Workstations
For technical drawings and 3-D models, click on a part number.
Raise and lower your robot arm on these workstations, placing them at the right height for each task. Manually adjust the work surface at 1-in. intervals, or add a hydraulic lift kit (sold separately) for faster and more precise positioning. These workstations have swivel casters for easy transport from one job to the next—use the leveling pads to balance them on uneven floors. When using these workstations with a large arm, such as the FANUC CRX-25iA, anchor them to ensure stability and safety. Workstations have ample room for storing your controller, teach pendant, and other robot accessories.
Overall | Capacity, lbs. | Robot Mount. Location | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Robot Arm Manufacturer (Series/Model No.) | Ht. | Wd. | Dp. | Ht. | Adjustment Increments | Top | Overall | Foot Type | Mount. Hole Thread Size (No. of Holes) | Mount. Fasteners Included | Each | |
White Painted Steel | ||||||||||||
| FANUC (CR 4, CR 7, CR 7L; CRX 5iA, 10iA, 10iA/L, 20iA/L, 25iA) Doosan (M0609, M0617, M1013, M1509) Omron (TM 5, TM 12, TM 14) Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) | 38" | 40 1/4" | 36" | 30"-38" | 1" | 1,400 | 1,800 | Caster | M6 (4) M8 (24) M10 (8) M12 (6) | Yes | 0000000 | 000000000 |
Hydraulic lift kits save you time spent manually lifting or lowering the work surface, which requires adjusting bolts on all four workstation legs. These kits also allow for more precise positioning than manual adjustment, which only lets you set the height at 1-in. intervals. When used with a lift kit, top capacity for workstations is 700 lbs.
Cylinder | Cylinder Mtg. Holes | Pump Mtg. Holes | Switch Mtg. Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Material | No. of | Dia. | No. of | Dia. | No. of | Dia. | Mtg. Fasteners Included | Cord Lg., ft. | Specifications Met | Each | |
| 1 1/2" | Aluminum | 4 | 1/4" | 7 | 1/4" | 2 | 3/16" | No | 8 | CSA Certified, UL Listed | 00000000 | 000000000 |
Sliding electrical enclosures slide out for easy access to electrical components. Push them back beneath the workstation to keep them out of the way. Rated IP66, these enclosures block out dust and water.
Workstation Mount. Location | |||||||
|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Environmental Rating | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Each | |
Black Painted Steel | |||||||
| 19 11/16" | 23 5/8" | 8 5/16" | IP66 NEMA 4 NEMA 12 | 6.6 mm (4) | Yes | 0000000 | 000000000 |
Attach mounting plates for compressed air devices to secure components such as filters, regulators, and lubricators for your compressed air system.
Compressed Air Devices Mount. Location | Workstation Mount. Location | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Mount. Hole Thread Size (No. of Holes) | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Each | |
White Painted Steel | ||||||||
| 14 3/16" | 16 1/2" | 2" | M4 (4) M6 (2) | No | 6.6 mm (2) | Yes | 0000000 | 0000000 |
Telescoping Robot Bases
Take your robot arm to new heights—these bases move up and down to extend your robot’s vertical reach for high and low stacking jobs. Often used for loading boxes off a conveyor, they start at ground level and extend as your stack gets higher. Attach them to your robot arm and program their movement with the robot's work cycle. The bases have a mounting plate, base controller, and software plug-in for connecting, operating, and programming your arm. Use the threaded holes on the bases and mounting plate to attach accessories, such as a cable management system.
Bases for FANUC are approved for compatibility and simple integration with FANUC CRX robot arms. To integrate these bases, install and activate FANUC’s R648 Socket Messaging protocol on your robot arm.
Bases for Universal Robots are all Universal Robots+ (UR+) certified products, and they have been validated by Universal Robots for compatibility and simple integration with UR robot arms. Pair them with Positioning Slides for Universal Robots to also extend the horizontal reach of your robot’s arm.
For technical drawings and 3-D models, click on a part number.
Overall Ht. | Overall | Load Capacity, lbs. | Robot Mount. Location | Floor Mount. Location | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Travel Ht., mm | When Retracted, mm | When Extended, mm | Lg., mm | Wd., mm | Position Accuracy, mm | Dynamic | Static | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Mount. Hole Dia. (No. of Holes) | Mount. Fasteners Included | Includes | Each | |
For FANUC (CRX 5iA, 10iA, 10iA/L, 20iA/L) | ||||||||||||||
Aluminum | ||||||||||||||
| 700 | 625 | 1,325 | 200 | 200 | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.3 mm (8) | Yes | Base Controller, Software Plug-In for FANUC Robots | 0000000 | 000000000 |
| 900 | 725 | 1,625 | 200 | 200 | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.3 mm (8) | Yes | Base Controller, Software Plug-In for FANUC Robots | 0000000 | 00000000 |
For Universal Robots (UR3, UR3e, UR5, UR5e, UR10, UR10e, UR16, UR16e) | ||||||||||||||
Aluminum | ||||||||||||||
| 500 | 525 | 1,025 | 200 | 200 | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.3 mm (8) | Yes | Base Controller, Software Plug-In for Universal Robots | 0000000 | 00000000 |
| 900 | 725 | 1,625 | 200 | 200 | ±1 | 325 | 325 | 6 mm (4), 8 mm (8) | Yes | 6.3 mm (8) | Yes | Base Controller, Software Plug-In for Universal Robots | 0000000 | 00000000 |