C-UL Listed Temperature Switches

Filter by

System of Measurement

Maximum Temperature

Maximum Switching Current @ Voltage

Pipe Size

Voltage

Electrical Phase

Switch Designation

Minimum Temperature

Probe Type

Probe Length

Application

Number of Circuits Controlled

Switch Starting Position

Probe Diameter

For Use With

Wire Connection

Environment

High-Pressure Washdown

Probe Material

Electrical Connection

Flat-Pin Mini Thermocouple Connector

Measurement Unit

DFARS Specialty Metals

REACH

RoHS

Compliant with Exemptions

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Certification

C-UL Listed

C-UL Recognized Component

CE Marked

CSA Certified

CSA-US Certified

Energy Star Certified

ETL Listed

FM Approved

UL Listed

UL Recognized Component

VDE Certified

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

108 Products

Wall-Mount Temperature Switches

Turn heating equipment on or off at a specified temperature. Switches have a probe on a cable for remote temperature readings. Set the actuation point with the adjustment dial.

Switches

SPDT (Single Pole,

Double Throw) Switch

with Enclosed Housing

1 Circuit Controlled—Switches that control one circuit are single pole, double throw (SPDT). They can be set to turn one circuit from off to on (normally open) or from on to off (normally closed).

			Probe
	Temp. Range, ° F	Max. Switching Current @ Voltage (Electrical Phase)	Dia.	Lg.	Material	Ht.	Wd.	Dp.	Fasteners Included	Enclosure Rating		Each
SPDT—1 Circuit Controlled







				Enclosed Housing

				-130 to 120	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	4 1/2"	Copper	3 1/4"	3 1/2"	2 13/16"	No	NEMA 1	47525K61	0000000


				0 to 150	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	6 7/8"	Copper	3 1/4"	3 1/2"	2 13/16"	No	NEMA 1	47525K62	000000
				50 to 300	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	4 1/2"	Copper	3 1/4"	3 1/2"	2 13/16"	No	NEMA 1	47525K63	000000
				150 to 650	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	3 5/8"	Copper	3 1/4"	3 1/2"	2 13/16"	No	NEMA 1	47525K64	000000

Switch Mounts

		Each
Packing Seals and Fittings	3626K31	000000

Threaded Temperature Switches

Install the threaded probe directly into tanks, pipelines, and other process components to turn heating equipment on or off at a specified temperature. These switches have an adjustment dial to set the actuation point. All are SPDT (single pole, double throw). They can be set to turn one circuit from off to on (normally open) or from on to off (normally closed).

							Probe								SPDT
	Temp. Range, ° F	Temp. Accuracy	No. of Actuation Points	Actuation Tolerance	No. of Circuits Controlled	Max. Switching Current @ Voltage (Electrical Phase)	Dia.	Lg.	Max. Pressure, psi	Ht.	Wd.	Dp.	Enclosure Rating	Certification		Each
Threaded Brass Probe—3/8 NPT Male







				Adjustable Actuation Point

				0 to 225	±2° F	1	-1% to 1%	1	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	9/16"	2 1/8"	1,897	3 5/16"	3 13/32"	2 13/16"	NEMA 1	UL Listed, C-UL Listed, CE Marked	47525K71	0000000


				200 to 425	±4° F	1	-1% to 1%	1	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	9/16"	2 1/8"	1,784	3 5/16"	3 13/32"	2 13/16"	NEMA 1	UL Listed, C-UL Listed, CE Marked	47525K72	000000

Washdown Threaded Temperature Switches

Turn heating equipment on or off in washdown environments. To withstand splashing water, corrosive liquid, and dust, these switches have a housing that meets NEMA 4X. The threaded probe installs directly into tanks, pipelines, and other process components. Use the adjustment dial to set actuation points.

2 Actuation Points—Switches with two actuation points have two SPDT (single pole, double throw) relays. Each relay can be set to turn one circuit from off to on (normally open) or from on to off (normally closed).

							Probe								SPDT
	Temp. Range, ° F	Temp. Accuracy	No. of Actuation Points	Actuation Tolerance	No. of Circuits Controlled	Max. Switching Current @ Voltage (Electrical Phase)	Dia.	Lg.	Max. Pressure, psi	Ht.	Wd.	Dp.	Enclosure Rating	Certification		Each
Threaded Brass Probe—1/2 NPT Male







				Adjustable Actuation Point

				0 to 225	±2° F	1	-1% to 1%	1	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	9/16"	1 7/8"	1,897	9 3/8"	4"	2 3/8"	NEMA 4X	UL Listed, C-UL Listed, CE Marked	5029K56	0000000


				0 to 225	±5° F	2	-1% to 1%	2	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	9/16"	1 7/8"	1,897	7 3/8"	5 3/32"	5 1/2"	NEMA 4X	UL Listed, C-UL Listed, CE Marked, FM Approved	5029K76	000000
				200 to 425	±4° F	1	-1% to 1%	1	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	9/16"	1 7/8"	1,784	9 3/8"	4"	2 3/8"	NEMA 4X	UL Listed, C-UL Listed, CE Marked	5029K52	000000

Washdown Wall-Mount Temperature Switches


With Threaded Copper Probe	With Unthreaded Stainless Steel Probe

To protect these switches from splashing water, corrosive liquid, and dust, the housing meets NEMA 4X for washdown conditions. Switches turn heating equipment on or off at a specified temperature. All have a probe on a cable for remote temperature readings. Set actuation points with the adjustment dial.

SPDT—SPDT (Single pole, double throw) switches can be set to turn circuits from off to on (normally open) or from on to off (normally closed). Switches with one actuation point have one SPDT (single pole, double throw) relay. The relay can be set to turn one circuit from off to on (normally open) or from on to off (normally closed). The probe has _1/2 NPT male threads for installation directly into tanks, pipelines, and other process components. It comes with a bushing that adapts the thread size to _3/4 NPT male. Switches with two actuation points have two SPDT (single pole, double throw) relays. Each relay can be set to turn one circuit from off to on (normally open) or from on to off (normally closed).

					Probe
	Temp. Range	Temperature Accuracy	No. of Actuation Points	Max. Switching Current @ Voltage (Electrical Phase)	Dia.	Lg.	Wire Connection	Ht.	Wd.	Dp.	Enclosure Rating	Certification		Each
SPDT—1 Circuit Controlled







				Threaded Copper Probe—1/2 NPT Male

				30° F to 250° F	±3° F	1	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	2 5/8"	Screw Terminal	8 11/16"	4"	2 3/8"	NEMA 4X	UL Listed, C-UL Listed, CE Marked	5029K53	0000000


				100° F to 400° F	±4° F	1	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	2 1/8"	Screw Terminal	8 11/16"	4"	2 3/8"	NEMA 4X	UL Listed, C-UL Listed, CE Marked	5029K54	000000


				SPDT—2 Circuits Controlled







								Unthreaded Stainless Steel Probe

								30° F to 250° F	±5° F	2	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	2 5/8"	Screw Terminal	6 11/16"	5 5/32"	5 1/2"	NEMA 4X	UL Listed, C-UL Listed, CE Marked, FM Approved	5029K73	000000


								100° F to 400° F	±8° F	2	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	2 1/8"	Screw Terminal	6 11/16"	5 5/32"	5 1/2"	NEMA 4X	UL Listed, C-UL Listed, CE Marked, FM Approved	5029K74	000000

Switch Mounts

		Each
Packing Seals and Fittings	3626K31	000000

Adjustable-Reset Electronic Temperature Switches


Adjustment Rings	4-Pole M12 Plug

An adjustable reset lets you control the amount of temperature change, also known as deadband and differential, before these switches reset. Twist the rings to select the setpoint temperature and reset temperature anywhere within the setpoint range. When they reach the set temperature, they send an electronic signal to your programmable logic controller (PLC) to turn equipment on or off. Because they control two circuits, they turn one device from off to on (normally open) and another from on to off (normally closed). An LED illuminates to indicate they’re switching. These switches are often used in control and automation in hydraulics, pneumatics, air-conditioning, and refrigeration applications. Made of stainless steel, they resist corrosion and chemicals.

Install these switches directly into tanks, pipelines, and other process components using their threaded probe. They have a micro M12 plug connection and are compatible with micro M12 sockets, so you can quickly connect and disconnect them. After selecting your setpoint, tighten the locking ring to prevent unintentional changes.

IP rated, these switches seal out dust and water from temporary submersion. They also meet U.S., Canadian, and European safety standards.

To view switch wiring diagrams, select a part number and click Product Detail.

							Probe			Electrical
	Temp. Range	Approx. Difference Between Set Point and Reset Point	Temperature Accuracy	Actuation Tolerance	Signal Output	Max. Switching Current @ Voltage	Dia.	Lg.	Max. Pressure, psi	Connection	No. of Poles	Enclosure Rating	Features		Each
2 Circuits Controlled—1 Off and 1 On







				Threaded Stainless Steel Probe—1/4 BSPP Male

				0° F to 280° F/-20° C to 140° C	Adjustable	±5° F/±3° C	-1% to 1%	PNP	500 mA @ 32V DC	1/4"	1 7/8"	5,800	M12	4	IP67	Adjustment Lock, LED Indicator	5189N113	0000000




						Threaded Stainless Steel Probe—1/4 NPT Male

						0° F to 280° F/-20° C to 140° C	Adjustable	±5° F/±3° C	-1% to 1%	PNP	500 mA @ 32V DC	1/4"	1 7/8"	5,800	M12	4	IP67	Adjustment Lock, LED Indicator	5189N111	000000

Micro M12 Socket Connectors with Cable

							Housing Thread
4	0.3"	250V AC/250V DC	4	22	0.25"	PVC	M12	1	Metric	0 to 220	6897K36	000000

Electronic Temperature Switches with Digital Display


	4-Pole M12 Plug

A digital display makes it easy to monitor the temperature and control when these switches turn heating equipment on and off. They have an adjustable reset, so you can change the temperature range between when they activate and deactivate, commonly referred to as deadband and differential. Use the keypad to adjust the setpoint and reset point anywhere on the setpoint range. They produce an electronic signal that is often used to communicate with a programmable logic controller (PLC), so they're common in control and automation applications. Install them directly into tanks, pipelines, and other process components using their threaded probe.

These switches have a micro M12 plug, so you can quickly connect and disconnect them.

Rated IP65 and IP67, these switches protect against dust and water from washdowns and temporary submersion. They’re also UL listed, C-UL listed, and CE marked, so they meet U.S., Canadian, and European safety standards.

							Probe			Electrical
	Temp. Range	Approx. Difference Between Set Point and Reset Point	Temperature Accuracy	Actuation Tolerance	Signal Output	Max. Switching Current @ Voltage	Dia.	Lg.	Max. Pressure, psi	Connection	No. of Poles	Enclosure Rating	Certification		Each
2 Circuits Controlled—2 Off or 2 On







				Threaded Stainless Steel Probe—1/4 NPT Male

				0° F to 170° F/-20° C to 80° C	Adjustable	±0.6° F/±0.9° C	-0.5% to 0.5%	PNP	250 mA @ 35V DC	1/4"	1"	2,100	M12	4	IP65, IP67	UL Listed, C-UL Listed, CE Marked	4701N11	0000000


				0° F to 240° F/-20° C to 120° C	Adjustable	±0.8° F/±1° C	-0.5% to 0.5%	PNP	250 mA @ 35V DC	1/4"	6"	725	M12	4	IP65, IP67	UL Listed, C-UL Listed, CE Marked	4701N12	000000

Hazardous Location Threaded Temperature Switches

Often used in hazardous locations, such as chemical plants, refineries, and grain elevators, these switches have a housing that’s UL listed for environments with flammable gases, combustible dust, and ignitable fibers. It is UL listed for use in Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2 hazardous locations. The housing also meets NEMA 4X for use in washdown environments with splashing water, corrosive liquid, and dust. Install the threaded probe directly into tanks, pipelines, and other process components to turn heating equipment on or off at a specified temperature. Set actuation points with the adjustment dial.

							Probe									SPDT
	Temp. Range, ° F	Temp. Accuracy	No. of Actuation Points	Actuation Tolerance	No. of Circuits Controlled	Max. Switching Current @ Voltage (Electrical Phase)	Dia.	Lg.	Max. Pressure, psi	Ht.	Wd.	Dp.	Enclosure Rating	Hazardous Location Rating	Certification		Each
Threaded Brass Probe—1/2 NPT Male







				Adjustable Actuation Point

				0 to 225	±2° F	1	-1% to 1%	1	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	9/16"	1 7/8"	1,897	10"	5 1/8"	5 3/16"	IP66, NEMA 4X, NEMA 7, NEMA 9	ATEX II 2 D Ex Tb IIIC T85° C Db ATEX II 2 G Ex Db IIC T6 Gb IEC Zone 1 Groups IIC, IIB, IIA IEC Zone 21 Groups IIIC, IIIB, IIIA IECEx Ex D IIC T6 Gb IECEx Ex Tb IIIC T85° C Db NEC Class I Divisions 1, 2 Groups B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 1 Groups IIB, IIA	UL Listed, C-UL Listed, CE Marked	5032K67	0000000


				0 to 225	±2° F	2	-1% to 1%	2	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	9/16"	1 7/8"	1,784	10"	5 1/8"	5 3/16"	IP66, NEMA 4X, NEMA 7, NEMA 9	ATEX II 2 D Ex Tb IIIC T85° C Db ATEX II 2 G Ex Db IIC T6 Gb IEC Zone 1 Groups IIC, IIB, IIA IEC Zone 21 Groups IIIC, IIIB, IIIA IECEx Ex D IIC T6 Gb IECEx Ex Tb IIIC T85° C Db NEC Class I Divisions 1, 2 Groups B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 1 Groups IIB, IIA	UL Listed, C-UL Listed, CE Marked	5032K87	00000000

Dual-Setpoint Electronic Temperature Switches


Adjustment Rings	1 7/8" Probe	9 3/4" Probe

Send signals to trigger two different processes, each with their own set temperatures. For example, use one setpoint to turn a heater on and off at one temperature and another to activate an alarm if the temperature rises too far above the cutoff point. Twist the outer ring to adjust your setpoints—no need for tools. After choosing your setpoint, tighten the locking ring to prevent unintentional changes. Once the setpoint is reached, an LED illuminates, indicating the switching status. The threaded probe installs directly into tanks, pipelines, and other process components.

These switches send an electronic PNP signal to your programmable logic controller (PLC), so they’re often used in control and automation applications. They have a micro M12 plug connection and are compatible with micro M12 sockets, allowing you to quickly connect and disconnect the switch.

They are rated IP67 for protection from dust and temporary submersion.

To view switch wiring diagrams, select a part number and click Product Detail.

							Probe			Electrical
	Temp. Range	Approx. Difference Between Setpoint and Reset Point	Temperature Accuracy	Actuation Tolerance	Signal Output	Max. Switching Current @ Voltage	Dia.	Lg.	Max. Pressure, psi	Connection	No. of Poles	Enclosure Rating	Features		Each
2 Circuits Controlled—1 Off and 1 On







				Threaded Stainless Steel Probe—1/2 BSPP Male

				0° F to 280° F/-20° C to 140° C	9° F/5° C	±5° F/±3° C	-1% to 1%	PNP	500 mA @ 32V DC	1/4"	9 3/4"	4,300	M12	4	IP67	Adjustment Lock, LED Indicator	5189N112	0000000


				2 Circuits Controlled—2 Off







								Threaded Stainless Steel Probe—1/4 BSPP Male

								0° F to 280° F/-20° C to 140° C	9° F/5° C	±5° F/±3° C	-1% to 1%	PNP	500 mA @ 32V DC	1/4"	1 7/8"	5,800	M12	4	IP67	Adjustment Lock, LED Indicator	5189N114	000000




										Threaded Stainless Steel Probe—1/4 NPT Male

										0° F to 280° F/-20° C to 140° C	9° F/5° C	±5° F/±3° C	-1% to 1%	PNP	500 mA @ 32V DC	1/4"	1 7/8"	5,800	M12	4	IP67	Adjustment Lock, LED Indicator	5189N115	000000

Micro M12 Socket Connectors with Cable

							Housing Thread
4	0.3"	250V AC/250V DC	4	22	0.25"	PVC	M12	1	Metric	0 to 220	6897K36	000000

Temperature-Controlled Outlet Adapters


	NEMA 5-15 Plug	NEMA 5-15 Socket

Automatically power heating and cooling devices on and off when temperatures rise or drop. With two outlets each, you can run multiple devices. Plug them into a standard wall outlet.

Heating—Heating outlet adapters turn the power on when your space drops below a set temperature. They cut the power once temperatures warm up.

Cooling—Cooling outlet adapters turn the power on when your space rises above a set temperature. They’re often used to turn on fans or other devices for cooling, ventilation, and air circulation. These outlet adapters cut the power once temperatures cool off.

20° F Minimum Actuation Point Temperature—Adapters with a 20° F minimum actuation point are often used to switch on engine and battery heaters when working in cold temperatures.

35° F Minimum Actuation Point Temperature—Adapters with a 35° F minimum actuation point work best with heaters to warm a space and prevent freezing.

	Actuation Point Temp., ° F
	Min.	Max.	No. of Outlets	Current, amp	Voltage, V AC	Material	Certification	Color		Each
NEMA 5-15 Plug × NEMA 5-15 Socket







				Heating/Power

				20	30	2	15	120	Plastic	UL Listed, C-UL Listed	White	6619N11	000000


				35	45	2	15	120	Plastic	UL Listed, C-UL Listed	White	6619N12	00000




						Cooling/Power

						70	78	2	15	120	Plastic	UL Listed, C-UL Listed	Red	6619N13	00000

Hazardous Location Wall-Mount Temperature Switches


With Threaded Probe	With Unthreaded Probe

Turn heating equipment on or off in environments with flammable gases, combustible dust, and ignitable fibers, such as chemical plants, refineries, and grain elevators. The switch housing is UL listed for use in Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2 hazardous locations. It also meets NEMA 4X for use in washdown environments with splashing water, corrosive liquid, and dust. Switches have a probe on a cable for remote temperature readings. Set actuation points with the adjustment dial.

1 Actuation Point—Switches with one actuation point have one SPDT (single pole, double throw) relay. The relay can be set to turn one circuit from off to on (normally open) or from on to off (normally closed). The probe has _1/2 NPT male threads for installation directly into tanks, pipelines, and other process components. It comes with a bushing that adapts the thread size to _3/4 NPT male.

					Probe
	Temp. Range	Temp. Accuracy	No. of Actuation Points	Max. Switching Current @ Voltage (Electrical Phase)	Dia.	Lg.	Ht.	Wd.	Dp.	Enclosure Rating	Hazardous Location Rating	Includes		Each
SPDT—1 Circuit Controlled







				Threaded Stainless Steel Probe—1/2 NPT Male

				30° F to 250° F	±5° F	1	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	2 5/8"	9 5/16"	5 1/8"	5 3/16"	IP66, NEMA 4X, NEMA 7, NEMA 9	ATEX II 2 D Ex Tb IIIC T85° C Db ATEX II 2 G Ex Db IIC T6 Gb IEC Zone 1 Groups IIC, IIB, IIA IEC Zone 21 Groups IIIC, IIIB, IIIA IECEx Ex D IIC T6 Gb IECEx Ex Tb IIIC T85° C Db NEC Class I Divisions 1, 2 Groups B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 1 Groups IIB, IIA	1/2 × 3/4 NPT Adapter Bushing	5032K66	000000000


				SPDT—2 Circuits Controlled







								Unthreaded Stainless Steel Probe

								30° F to 250° F	±5° F	2	15 amp @ 125V AC (Single) 15 amp @ 250V AC (Single) 15 amp @ 480V AC (Single)	3/8"	2 5/8"	9 5/16"	5 1/8"	5 3/16"	IP66, NEMA 4X, NEMA 7, NEMA 9	ATEX II 2 D Ex Tb IIIC T85° C Db ATEX II 2 G Ex Db IIC T6 Gb IEC Zone 1 Groups IIC, IIB, IIA IEC Zone 21 Groups IIIC, IIIB, IIIA IECEx Ex D IIC T6 Gb IECEx Ex Tb IIIC T85° C Db NEC Class I Divisions 1, 2 Groups B, C, D NEC Class II Divisions 1, 2 Groups E, F, G NEC Class III Divisions 1, 2 NEC Zone 1 Groups IIB, IIA	—	5032K86	00000000

Switch Mounts

		Each
Packing Seals and Fittings	3626K31	000000

Autotuning Temperature Controllers

Ideal in systems with rapid, unpredictable, or complex temperature changes, these controllers turn heating equipment on and off using a proportional-integral-derivative (PID) control algorithm to make fine adjustments, giving you the most precise and stable temperature control. They work similarly to proportional controllers but gather more variables to calculate the most effective way to return to the target temperature and avoid overshooting. They also have fuzzy logic to learn your system's behavior and compensate as needed. Use the autotuning function to have the controller cycle and identify the ideal PID variables for your system. You can also manually select the PID variables. These controllers read temperature with a highly sensitive thermocouple or RTD probe (both not included) in critical process applications. Since they reset automatically, they switch off and on again as the temperature fluctuates. All fit into instrument panels with DIN cutouts. Use the keypad to adjust the actuation point, reset point, other settings.

All meet American, Canadian, and European safety standards.

Mechanical Relay Output


For 1/32 DIN Panel Cutout Size	For 1/16 DIN Panel Cutout Size	For 1/8 DIN Panel Cutout Size

For 3/16 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

Mechanical relay outputs actuate circuits directly. All are single pole, single throw (SPST) relays and turn one circuit from off to on (normally open).

For Alarming—Alarm outputs can also be configured to actuate simple devices.

IP20 Enclosure Rating and IP50 Enclosure Rating—IP20 rated controllers prevent objects about the size of a finger from coming into contact with a live circuit. IP50 rated controllers protect against dust.

				Mechanical Relay
	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating		Each
For 1/32 DIN Panel Cutout Size–For 7/8" Ht. × 1 3/4" Wd. Panel Cutout



		B, E, J, K, L, N, R, S, T	1	Heating—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	15/16"	1 7/8"	3 5/8"	IP20, IP50	38615K171	0000000


		B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	15/16"	3 13/16"	IP20, IP50	38615K75	000000


		For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



				B, E, J, K, L, N, R, S, T	1	Heating—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K181	000000


				B, E, J, K, L, N, R, S, T	2	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K78	000000
				B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K182	000000
				B, E, J, K, L, N, R, S, T	4	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—2 Mechanical Relays	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K183	000000


				For 1/8 DIN Panel Cutout Size–For 1 3/4" Ht. × 3 5/8" Wd. Panel Cutout



						B, E, J, K, L, N, R, S, T	1	Heating—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	3 3/4"	2 3/8"	IP20, IP50	38615K191	000000


						B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	3 3/4"	2 3/8"	IP20, IP50	38615K86	000000


						For 1/8 DIN Panel Cutout Size–For 3 5/8" Ht. × 1 3/4" Wd. Panel Cutout



								B, E, J, K, L, N, R, S, T	1	Heating—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	1 7/8"	2 3/8"	IP20, IP50	38615K194	000000


								B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	1 7/8"	2 3/8"	IP20, IP50	38615K83	000000


								For 3/16 DIN Panel Cutout Size–For 2 11/16" Ht. × 2 11/16" Wd. Panel Cutout



										B, E, J, K, L, N, R, S, T	1	Heating—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	2 27/32"	2 27/32"	2 3/8"	IP20, IP50	38615K271	000000


										B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	2 9/16"	2 7/8"	2 3/8"	IP20, IP50	38615K89	000000


										For 1/4 DIN Panel Cutout Size–For 3 5/8" Ht. × 3 5/8" Wd. Panel Cutout



												B, E, J, K, L, N, R, S, T	1	Heating—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	38615K281	000000


												B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	38615K93	000000
												B, E, J, K, L, N, R, S, T	4	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—2 Mechanical Relays	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	38615K282	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	38615K113	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	38615K111	000000
1/16, 1/8	Yes	No. 8	4	38615K112	00000

Solid State Relay Output


For 1/32 DIN Panel Cutout Size	For 1/16 DIN Panel Cutout Size	For 1/8 DIN Panel Cutout Size

For 3/16 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

Solid state relay outputs send a pulse signal to directly control an external solid state relay (not included). They have a longer service life than mechanical and signal relays. Use them for more precise and rapid control switching than mechanical relays.

For Alarming—Alarm outputs can also be configured to actuate simple devices.

				Mechanical Relay
	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating		Each
For 1/32 DIN Panel Cutout Size–For 7/8" Ht. × 1 3/4" Wd. Panel Cutout



		B, E, J, K, L, N, R, S, T	1	Heating—1 14V DC Solid State Relay	—	—	Thermocouple, RTD	Automatic	90 to 250	15/16"	1 7/8"	3 5/8"	IP20, IP50	38615K172	0000000


		B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	15/16"	3 13/16"	IP20, IP50	38615K76	000000


		For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



				B, E, J, K, L, N, R, S, T	1	Heating—1 14V DC Solid State Relay	—	—	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K184	000000


				B, E, J, K, L, N, R, S, T	2	Heating—1 5V DC Solid State Relay Cooling—1 5V DC Solid State Relay	—	—	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K185	000000
				B, E, J, K, L, N, R, S, T	2	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K79	000000
				B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K81	000000


				For 1/8 DIN Panel Cutout Size–For 1 3/4" Ht. × 3 5/8" Wd. Panel Cutout



						B, E, J, K, L, N, R, S, T	1	Heating—1 14V DC Solid State Relay	—	—	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	3 3/4"	2 3/8"	IP20, IP50	38615K192	000000


						B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	3 3/4"	2 3/8"	IP20, IP50	38615K87	000000


						For 1/8 DIN Panel Cutout Size–For 3 5/8" Ht. × 1 3/4" Wd. Panel Cutout



								B, E, J, K, L, N, R, S, T	1	Heating—1 14V DC Solid State Relay	—	—	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	1 7/8"	2 3/8"	IP20, IP50	38615K195	000000


								B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	1 7/8"	2 3/8"	IP20, IP50	38615K84	000000


								For 3/16 DIN Panel Cutout Size–For 2 11/16" Ht. × 2 11/16" Wd. Panel Cutout



										B, E, J, K, L, N, R, S, T	1	Heating—1 14V DC Solid State Relay	—	—	Thermocouple, RTD	Automatic	90 to 250	2 27/32"	2 27/32"	2 3/8"	IP20, IP50	38615K272	000000


										B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	2 9/16"	2 7/8"	2 3/8"	IP20, IP50	38615K91	000000


										For 1/4 DIN Panel Cutout Size–For 3 5/8" Ht. × 3 5/8" Wd. Panel Cutout



												B, E, J, K, L, N, R, S, T	1	Heating—1 14V DC Solid State Relay	—	—	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	38615K283	000000


												B, E, J, K, L, N, R, S, T	2	Heating—1 5V DC Solid State Relay Cooling—1 5V DC Solid State Relay	—	—	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	38615K284	000000
												B, E, J, K, L, N, R, S, T	3	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	38615K94	000000
												B, E, J, K, L, N, R, S, T	4	Heating—1 14V DC Solid State Relay Cooling/Alarming—1 Mechanical Relay Alarming—2 Mechanical Relays	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	38615K96	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	38615K113	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	38615K111	000000
1/16, 1/8	Yes	No. 8	4	38615K112	00000

Analog Signal Output


For 1/32 DIN Panel Cutout Size	For 1/16 DIN Panel Cutout Size	For 1/8 DIN Panel Cutout Size

For 3/16 DIN Panel Cutout Size	For 1/4 DIN Panel Cutout Size

Analog signal outputs are typically used with SRC (silicon controlled rectifier) power controllers (not included) for some of the highest precision control.

For Alarming—Alarm outputs can also be configured to actuate simple devices.

				Mechanical Relay
	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating		Each
For 1/32 DIN Panel Cutout Size–For 7/8" Ht. × 1 3/4" Wd. Panel Cutout



		B, E, J, K, L, N, R, S, T	1	Heating—1 4 mA to 20 mA Analog Signal	—	—	Thermocouple, RTD	Automatic	90 to 250	15/16"	1 7/8"	3 5/8"	IP20, IP50	38615K173	0000000


		B, E, J, K, L, N, R, S, T	3	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	15/16"	3 13/16"	IP20, IP50	38615K77	000000


		For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



				B, E, J, K, L, N, R, S, T	1	Heating—1 4 mA to 20 mA Analog Signal	—	—	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K186	000000


				B, E, J, K, L, N, R, S, T	2	Heating—1 4 mA to 20 mA Analog Signal Cooling—1 4 mA to 20 mA Analog Signal	—	—	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K187	000000
				B, E, J, K, L, N, R, S, T	2	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	1 7/8"	2 3/8"	IP20, IP50	38615K82	000000


				For 1/8 DIN Panel Cutout Size–For 1 3/4" Ht. × 3 5/8" Wd. Panel Cutout



						B, E, J, K, L, N, R, S, T	1	Heating—1 4 mA to 20 mA Analog Signal	—	—	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	3 3/4"	2 3/8"	IP20, IP50	38615K193	000000


						B, E, J, K, L, N, R, S, T	3	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	1 7/8"	3 3/4"	2 3/8"	IP20, IP50	38615K88	000000


						For 1/8 DIN Panel Cutout Size–For 3 5/8" Ht. × 1 3/4" Wd. Panel Cutout



								B, E, J, K, L, N, R, S, T	1	Heating—1 4 mA to 20 mA Analog Signal	—	—	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	1 7/8"	2 3/8"	IP20, IP50	38615K196	000000


								B, E, J, K, L, N, R, S, T	3	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	1 7/8"	2 3/8"	IP20, IP50	38615K85	000000


								For 3/16 DIN Panel Cutout Size–For 2 11/16" Ht. × 2 11/16" Wd. Panel Cutout



										B, E, J, K, L, N, R, S, T	1	Heating—1 4 mA to 20 mA Analog Signal	—	—	Thermocouple, RTD	Automatic	90 to 250	2 27/32"	2 27/32"	2 3/8"	IP20, IP50	38615K273	000000


										B, E, J, K, L, N, R, S, T	3	Heating—1 4 mA to 20 mA Analog Signal Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	2 9/16"	2 7/8"	2 3/8"	IP20, IP50	38615K92	000000


										For 1/4 DIN Panel Cutout Size–For 3 5/8" Ht. × 3 5/8" Wd. Panel Cutout



												B, E, J, K, L, N, R, S, T	1	Heating—1 4 mA to 20 mA Analog Signal	—	—	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	38615K285	000000


												B, E, J, K, L, N, R, S, T	2	Heating—1 4 mA to 20 mA Analog Signal Cooling—1 4 mA to 20 mA Analog Signal	—	—	Thermocouple, RTD	Automatic	90 to 250	3 3/4"	3 3/4"	2 3/8"	IP20, IP50	38615K286	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	38615K113	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	38615K111	000000
1/16, 1/8	Yes	No. 8	4	38615K112	00000

On/Off Temperature Controllers for Plug-in Heaters


IP20, NEMA 1—DIN-Rail and Wall Mount	IP66, NEMA 4X—Wall Mount

Switch heaters on or off when your process reaches a certain temperature. Both these controllers and your heater will be powered by the same wall outlet. Place the probe into your process, plug the controller into an outlet, and plug your heater into the socket on the back of the controller’s plug. These simple temperature controllers deliver either full power or no power. They’re best used in systems where temperatures change slowly and you don’t need precise control.

IP20 Enclosure Rating and NEMA 1 Enclosure Rating—IP20 and NEMA 1 rated controllers are best for indoor use. They keep dirt out and will stop objects about the size of a finger from coming into contact with a live circuit.

IP66 Enclosure Rating and NEMA 4X Enclosure Rating—IP66 and NEMA 4X rated controllers seal out dirt, corrosive liquids, and water from high-pressure washdowns.

			Mechanical Relay			Probe
	Temperature Control Range	Output Type	Switch Designation	Max. Switching Current @ Voltage	Reset Type	Dia.	Lg.	Cable Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.		Each
IP20, NEMA 1—DIN-Rail and Wall Mount



		-40° F to 212° F -40° C to 100° C	Heating—1 Mechanical Relay	SPDT-NO	12 amp @ 120V AC	Automatic	1/4"	2"	6	120	5"	2 7/16"	2 1/2"	6461N11	0000000


		IP66, NEMA 4X—Wall Mount



				-40° F to 212° F -40° C to 100° C	Heating—1 Mechanical Relay	SPDT-NO	12 amp @ 120V AC	Automatic	1/4"	2"	6	120	6 5/8"	2 13/16"	2 13/16"	6461N12	000000

Electronic Insertion-Mount Flow Switches

Instead of disassembling your system for inline installation, thread these flow switches onto a mounting adapter (sold separately) and insert them into a pipe tee or pipe outlet. They send digital signals to your programmable logic controller (PLC) to activate automated controls or alarms when they reach a set flow rate. To calculate the flow rate, they generate a small amount of heat, then measure the cooling effect your liquid or gas has on it. This makes them ideal in applications with fluctuating temperatures. Use the buttons on the display to adjust the set point and other settings. These switches are accurate in any mounting position.

IP65 rated switches protect against dust and washdowns. IP67 rated switches withstand temporary submersion.

		Flow Set Point									1 13/16" Probe Length
	For Pipe Size	For Liquids, gpm	For Gas, scfm	Max. Pressure @ Temp.	Temp. Range, ° F	Voltage, V DC	Max. Switching Current @ Voltage	Body Ht.	Enclosure Rating	Certification		Each
304 Stainless Steel Body with 316 Stainless Steel Fittings







				1 Digital NPN Signal Output

				1/4 1/2 3/4 1	0.02 to 1.5 0.05 to 4.9 0.13 to 12.7 0.23 to 23	0.14 to 2 0.54 to 8.05 1.21 to 18.11 2.15 to 32.21	4,300 psi @ 70° F	-10 to 175	36	250 mA @ 19V DC 250 mA @ 36V DC	2 11/16"	IP65, IP67	C-UL Listed UL Listed CE Marked	4547N13	0000000




						1 Digital PNP Signal Output

						1/4 1/2 3/4 1	0.02 to 1.5 0.05 to 4.9 0.13 to 12.7 0.23 to 23	0.14 to 2 0.54 to 8.05 1.21 to 18.11 2.15 to 32.21	4,300 psi @ 70° F	-10 to 175	36	250 mA @ 36V DC 250 mA @ 18V DC	2 11/16"	IP65, IP67	C-UL Listed UL Listed CE Marked	4547N11	000000




								2 Digital NPN Signal Output

								1/4 1/2 3/4 1	0.02 to 1.5 0.05 to 4.9 0.13 to 12.7 0.23 to 23	0.14 to 2 0.54 to 8.05 1.21 to 18.11 2.15 to 32.21	4,300 psi @ 70° F	-10 to 175	36	250 mA @ 19V DC 250 mA @ 36V DC	2 11/16"	IP65, IP67	C-UL Listed UL Listed CE Marked	4547N14	000000




										2 Digital PNP Signal Output

										1/4 1/2 3/4 1	0.02 to 1.5 0.05 to 4.9 0.13 to 12.7 0.23 to 23	0.14 to 2 0.54 to 8.05 1.21 to 18.11 2.15 to 32.21	4,300 psi @ 70° F	-10 to 175	36	250 mA @ 36V DC 250 mA @ 18V DC	2 11/16"	IP65, IP67	C-UL Listed UL Listed CE Marked	4547N12	000000

Mounting Adapters

Threaded Fitting

Connection

	Thread Type	Gender	Lg.	Material		Each
Threaded Fitting Connection



	1/4	NPT	Male	1 7/16"	316 Stainless Steel	4547N15	000000


	1/2	NPT	Male	1 1/8"	316 Stainless Steel	4547N16	00000
	3/4	NPT	Male	15/16"	304 Stainless Steel	4547N17	00000
	1	NPT	Male	1 3/8"	304 Stainless Steel, Brass	4547N18	00000

Wet-Location Line-Voltage Thermostats


Hardwire	Plug

Regulate temperatures in wet locations for HVAC systems that use direct electrical power, such as air conditioners and heaters. These thermostats have a sealed housing to protect against dripping, splashing, and falling liquids.

Plug In—Thermostats with a plug are easy to connect. Plug in the thermostat and then plug your heater into the thermostat.

Cannot Be Sold To—Energy efficiency requirements restrict sales to the listed jurisdictions/areas.

							Electrical		Overall
	Voltage, V AC	Current, amp	Temp. Setting, ° F	Switch Designation	Cord Lg., ft.	Electrical Connection Type	Connection	No. of Blades	Ht.	Wd.	Dp.	For Use Outdoors	Mounting Fasteners Included	Mounting Hole Dia.	Display Type	Certification	UL File No.	Cannot Be Sold To		Each
For Air Conditioners and Heaters







				Dial Control

				120 to 277	22	30 to 110	SPDT	—	Hardwire	—	—	7 3/4"	3"	2 5/8"	Yes	No	7/32"	Analog	C-UL Listed, UL Listed	E313212	Colorado	9705K57	0000000


				120 to 277	22	30 to 110	DPDT	—	Hardwire	—	—	7 3/4"	3"	2 5/8"	Yes	No	7/32"	Analog	C-UL Listed, UL Listed	E313212	Colorado	9705K59	000000


				For Heaters







								Dial Control

								125	10	30 to 110	SPDT	7	Plug In	Straight Blade	3	7 3/4"	3"	2 5/8"	Yes	No	7/32"	Analog	C-UL Listed, UL Listed	E313212	Colorado	9705K58	000000

DIN-Rail-Mount Autotuning Temperature Controllers

Mount these temperature controllers directly onto DIN rail for controlling systems with rapid, unpredictable, or complex temperature changes. They turn heating equipment on and off using a proportional-integral-derivative (PID) control algorithm to make fine adjustments, giving you the most precise and stable temperature control. All work similarly to proportional controllers but gather more variables to calculate the most effective way to return to the target temperature and avoid overshooting. They also have fuzzy logic to learn your system's behavior and compensate as needed. Use the autotuning function to have the controller cycle and identify the ideal PID variables for your system. These controllers read temperature with a highly sensitive thermocouple or RTD probe (both not included) in critical process applications. Since they reset automatically, they switch off and on again as the temperature fluctuates. Use the keypad to adjust the actuation point, reset point, and other settings.

All meet American, Canadian, and European safety standards.

Mechanical Relay Output

Mechanical relay outputs actuate circuits directly. All are single pole, single throw (SPST) relays and turn one circuit from off to on (normally open).

For Alarming and For Cooling—Those with cooling/alarm outputs can also be used to turn cooling equipment on or off at a specified temperature.

For Alarming—Alarm outputs can be configured to actuate alarms or other simple devices.

			Mechanical Relay
For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating		Each



	B, E, J, K, L, N, R, S, T	1	Heating—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 25/32"	7/8"	3 1/8"	NEMA 1	5705N11	0000000


	B, E, J, K, L, N, R, S, T	3	Heating—1 Mechanical Relay Cooling/Alarming—1 Mechanical Relay Alarming—1 Mechanical Relay	SPST-NO	2 amp @ 240V AC	Thermocouple, RTD	Automatic	90 to 250	3 25/32"	7/8"	3 1/8"	NEMA 1	5705N12	000000

Solid State Relay Output

Solid state relay outputs send a pulse signal to directly control an external solid state relay (not included). They last longer than mechanical and analog signal relays. Use them for more precise and rapid control switching than mechanical relays.

Total No. of Outputs	Output Type	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating		Each



B, E, J, K, L, N, R, S, T	1	Heating—1 14V DC Solid State Relay	Thermocouple, RTD	Automatic	90 to 250	3 25/32"	7/8"	3 1/8"	NEMA 1	5705N13	0000000

Analog Signal Output

Analog signal outputs are typically used with SRC (silicon controlled rectifier) power controllers (not included) for some of the highest precision control.

Total No. of Outputs	Output Type	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Enclosure Rating		Each



B, E, J, K, L, N, R, S, T	1	Heating—1 4 mA to 20 mA Analog Signal	Thermocouple, RTD	Automatic	90 to 250	3 25/32"	7/8"	3 1/8"	NEMA 1	5705N14	0000000

Bench-Top Autotuning Temperature Controllers

Built into an enclosure, these temperature controllers are protected when sitting on your workbench. Ideal in systems with rapid, unpredictable, or complex temperature changes, they turn heating equipment on and off using a proportional-integral-derivative (PID) control algorithm to make fine adjustments, giving you the most precise and stable temperature control. All work similarly to proportional controllers but gather more variables to calculate the most effective way to return to the target temperature and avoid overshooting it. They also have fuzzy logic to learn your system's behavior and compensate as needed. Use the autotuning function to have the controller cycle and identify the ideal PID variables for your system. These controllers read temperature with a highly sensitive thermocouple probe in critical process applications. Since they reset automatically, they switch off and on again as the temperature fluctuates. Use the keypad to adjust the actuation point, reset point, and other settings.

The controllers have mechanical relay outputs that actuate circuits directly. All are single pole, single throw (SPST-NO) relays and turn one circuit from off to on (normally open).

Controllers with 1 Control Zone

NEMA

5-20

NEMA

6-20

			Mechanical Relay
For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	Reset Type	Input Voltage, V AC	NEMA Type	Cord Lg., ft.	Ht.	Wd.	Dp.	Enclosure Rating		Each
J	1	Heating—1 Mechanical Relay	SPST-NO	16 amp @ 120V AC	Automatic	120	5-20	5	5"	5"	11"	IP50	1797N11	0000000
J	1	Heating—1 Mechanical Relay	SPST-NO	16 amp @ 240V AC	Automatic	240	6-20	5	5"	5"	11"	IP50	1797N12	000000
K	1	Heating—1 Mechanical Relay	SPST-NO	16 amp @ 120V AC	Automatic	120	5-20	5	5"	5"	11"	IP50	1797N101	000000
K	1	Heating—1 Mechanical Relay	SPST-NO	16 amp @ 240V AC	Automatic	240	6-20	5	5"	5"	11"	IP50	1797N102	000000

Controllers with 1 Control Zone and High-Limit Control

Image of Product. Front orientation. Temperature Controllers. Bench-Top Autotuning Temperature Controllers, Controllers with 1 Control Zone and High-Limit Control.

Controllers with high-limit control let you attach a second thermocouple probe to take the temperature of your heating equipment. If your equipment reaches the high limit, these controllers shut down your heating equipment and won't let it turn back on until you manually reset it, improving the safety of your system.

			Mechanical Relay
For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	Reset Type	Input Voltage, V AC	NEMA Type	Cord Lg., ft.	Ht.	Wd.	Dp.	Enclosure Rating		Each
J—Heating K—High-Limit Control	1	Heating—1 Mechanical Relay	SPST-NO	16 amp @ 120V AC	Automatic, Manual	120	5-20	5	5"	8 1/2"	11"	IP50	1797N105	000000000
K—Heating K—High-Limit Control	1	Heating—1 Mechanical Relay	SPST-NO	16 amp @ 120V AC	Automatic, Manual	120	5-20	5	5"	8 1/2"	11"	IP50	1797N106	00000000

Controllers with 2 Control Zones

Controllers with two control zones let you independently turn heating equipment on and off in two separate areas, each with their own thermocouple input and heating control output.

			Mechanical Relay
For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	Reset Type	Input Voltage, V AC	NEMA Type	Cord Lg., ft.	Ht.	Wd.	Dp.	Enclosure Rating		Each
J	2	Heating—2 Mechanical Relays	SPST-NO	8 amp @ 120V AC	Automatic	120	5-20	5	5"	8 1/2"	11"	IP50	1797N103	000000000
K	2	Heating—2 Mechanical Relays	SPST-NO	8 amp @ 120V AC	Automatic	120	5-20	5	5"	8 1/2"	11"	IP50	1797N104	00000000

Sanitary Electronic Insertion-Mount Flow Switches

Easy to clean and install, these flow switches are 3-A certified to meet sanitary design standards and insert into your line with a quick-clamp mounting adapter (sold separately). They have a smooth probe, and unlike flow switches that measure with a paddle or turbine, these don’t have moving parts for contaminants to get stuck in. Rated IP67 and IP69K, they withstand temporary submersion and high-temperature, high-pressure washdowns. The mounting adapter attaches to a quick-clamp tube tee or outlet (often called tri-clamp fittings) in your large-diameter tubing system using a gasket and clamp (not included), so you don't need to disassemble your line for inline installation. This mounting adapter is also easy to remove and clean.

They send digital signals to your programmable logic controller (PLC) to activate automated controls or alarms when they reach a set flow rate. To calculate the flow rate, they generate a small amount of heat, then measure the cooling effect your liquid or gas has on it. This makes them ideal in applications with fluctuating temperatures. Use the buttons on the display to adjust the set point and other settings. They’re accurate in any mounting position.

		Flow Set Point										13/16" Probe Length		1 13/16" Probe Length
	For Tube OD	For Liquids, gpm	For Gas, scfm	Max. Pressure @ Temp.	Temp. Range, ° F	Voltage, V DC	Max. Switching Current @ Voltage	Body Ht.	Enclosure Rating	Certification	Food Industry Std.		Each		Each
316 Stainless Steel Body with 316 Stainless Steel Fittings







				1 Digital PNP Signal Output

				1 1/2" 2"	0.55 to 54.21 0.97 to 96.37	4.84 to 72.47 8.59 to 128.84	430 psi @ 70° F	-10 to 200	36	250 mA @ 19V DC 250 mA @ 36V DC	3 5/16"	IP67, IP69K	C-UL Listed UL Listed CE Marked	3-A Certified 74-07, FDA Compliant 21 CFR 177.2415	4548N11	0000000	4548N12	0000000

Mounting Adapters

Quick-Clamp Fitting

Connection

	Flange OD	Gender	Lg.	Material		Each
Quick-Clamp Fitting Connection



	1 1/2"	1.988"	Male	11/16"	316 Stainless Steel	4548N13	0000000


	2"	2.52"	Male	11/16"	316 Stainless Steel	4548N14	000000

Proportional Temperature Controllers

Cycle heaters on and off intermittently to maintain a set temperature in your system. These proportional controllers keep your heater on when your system is below the set temperature, and they turn it off in short cycles when your system nears the set temperature. The short cycles make them more precise and allow less temperature fluctuation than on/off controllers. Use them on electric heaters only—they don't work with valves or solenoids.

Turn the dial on these controllers to choose your set temperature. They use a highly sensitive thermocouple probe (not included) to read temperature. Their mechanical relay actuates circuits directly. All are SPDT (single pole, double throw) and can turn one circuit from off to on (normally open) or on to off (normally closed). Install these controllers into instrument panels with DIN cutouts.

All controllers meet American, Canadian, and European safety standards.

Mechanical Relay Output

					Mechanical Relay
	Temp. Control Range, ° F	For Thermocouple Probe Type	Total No. of Outputs	Output Type	Switch Designation	Max. Switching Current @ Voltage	For Probe Type	Reset Type	Input Voltage Range, V AC	Ht.	Wd.	Dp.	Features		Each
For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout



		35 to 390	K	1	Heating—1 Mechanical Relay	SPDT	3 amp @ 250V AC	Thermocouple	Automatic	100 to 240	2 1/4"	1 7/8"	3 3/4"	LED Status Indicator	5914N13	0000000


		35 to 750	K	1	Heating—1 Mechanical Relay	SPDT	3 amp @ 250V AC	Thermocouple	Automatic	100 to 240	2 1/4"	1 7/8"	3 3/4"	LED Status Indicator	5914N14	000000
		35 to 2,190	K	1	Heating—1 Mechanical Relay	SPDT	3 amp @ 250V AC	Thermocouple	Automatic	100 to 240	2 1/4"	1 7/8"	3 3/4"	LED Status Indicator	5914N15	000000

Accessories for Temperature Controllers

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers

Mounting Fasteners

Not Included

DIN-Rail/Surface-Mount Adapters for 1/16 DIN Controllers—DIN-rail/surface-mount adapters mount _1/16 DIN controllers to a DIN rail or surface.

Mounting
Fasteners Included	Screw Size	No. of Holes		Each
No	No. 6	2	38615K113	000000

DIN Cutout Adapters for 1/16 DIN Controllers

Mounting Fasteners

Included

DIN Cutout Adapters for 1/16 DIN Controllers—DIN cutout adapters convert larger cutouts to fit _1/16 DIN controllers.

	Mounting
For DIN Panel Cutout Size	Fasteners Included	Screw Size	No. of Holes		Each
1/16, 1/4	Yes	No. 8	4	38615K111	000000
1/16, 1/8	Yes	No. 8	4	38615K112	00000

							Housing Thread
No. of Poles	Face Dia.	Voltage	Current, amp	Wire Lead AWG	Cable OD	Housing Material	Size	Pitch, mm	Type	Temp. Range, ° F		Each
4	0.3"	250V AC/250V DC	4	22	0.25"	PVC	M12	1	Metric	0 to 220	6897K36	000000