McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    10 Products

    Washdown Wall-Mount Temperature Switches

    Image of Product. With Unthreaded Stainless Steel Probe. Front orientation. Temperature Switches. Washdown Wall-Mount Temperature Switches, SPDT—2 Circuits Controlled.

    With

    Unthreaded

    Stainless

    Steel Probe

    To protect these switches from splashing water, corrosive liquid, and dust, the housing meets NEMA 4X for washdown conditions. Switches turn heating equipment on or off at a specified temperature. All have a probe on a cable for remote temperature readings. Set actuation points with the adjustment dial.
    SPDT—SPDT (Single pole, double throw) switches can be set to turn circuits from off to on (normally open) or from on to off (normally closed). Switches with one actuation point have one SPDT (single pole, double throw) relay. The relay can be set to turn one circuit from off to on (normally open) or from on to off (normally closed). The probe has 1/2 NPT male threads for installation directly into tanks, pipelines, and other process components. It comes with a bushing that adapts the thread size to 3/4 NPT male. Switches with two actuation points have two SPDT (single pole, double throw) relays. Each relay can be set to turn one circuit from off to on (normally open) or from on to off (normally closed).
    Probe
    Temp. Range
    Temperature
    Accuracy
    No. of Actuation
    Points
    Max. Switching Current @ Voltage
    (Electrical Phase)
    Dia.
    Lg.
    Wire
    Connection
    Ht.
    Wd.
    Dp.
    Enclosure
    Rating
    Certification
    Each
    SPDT—2 Circuits Controlled
     
    Unthreaded Stainless Steel Probe
    30° F to 250° F±5° F215 amp @ 125V AC (Single)
    15 amp @ 250V AC (Single)
    15 amp @ 480V AC (Single)
    3/8"2 5/8"Screw Terminal6 11/16"5 5/32"5 1/2"NEMA 4X
    UL Listed, C-UL Listed, CE Marked, FM Approved
    5029K730000000
    100° F to 400° F±8° F215 amp @ 125V AC (Single)
    15 amp @ 250V AC (Single)
    15 amp @ 480V AC (Single)
    3/8"2 1/8"Screw Terminal6 11/16"5 5/32"5 1/2"NEMA 4X
    UL Listed, C-UL Listed, CE Marked, FM Approved
    5029K74000000
     
    Switch Mounts

    Washdown Threaded Temperature Switches

    Image of Product. Front orientation. Temperature Switches. Washdown Threaded Temperature Switches.
    Turn heating equipment on or off in washdown environments. To withstand splashing water, corrosive liquid, and dust, these switches have a housing that meets NEMA 4X. The threaded probe installs directly into tanks, pipelines, and other process components. Use the adjustment dial to set actuation points.
    2 Actuation Points—Switches with two actuation points have two SPDT (single pole, double throw) relays. Each relay can be set to turn one circuit from off to on (normally open) or from on to off (normally closed).
    Probe
    SPDT
    Temp. Range,
    ° F
    Temp.
    Accuracy
    No. of Actuation
    Points
    Actuation
    Tolerance
    No. of Circuits
    Controlled
    Max. Switching Current @ Voltage
    (Electrical Phase)
    Dia.
    Lg.
    Max. Pressure,
    psi
    Ht.
    Wd.
    Dp.
    Enclosure
    Rating
    Certification
    Each
    Threaded Brass Probe—1/2 NPT Male
     
    Adjustable Actuation Point
    0 to 225±5° F2-1% to 1%215 amp @ 125V AC (Single)
    15 amp @ 250V AC (Single)
    15 amp @ 480V AC (Single)
    9/16"1 7/8"1,8977 3/8"5 3/32"5 1/2"NEMA 4X
    UL Listed, C-UL Listed, CE Marked, FM Approved
    5029K760000000
     

    High-Limit Temperature Controllers

    To protect equipment and personnel, these controllers shut down your machine when it gets too hot. Reset them manually to turn your machine on again. They're often used as a fail-safe system and for triggering alarms.
    Set the actuation point and adjust other settings with the keypad. To read the temperature, these controllers use a highly sensitive thermocouple probe (sold separately). They have one or two mechanical relays that actuate circuits directly. Mount them into instrumentation panels with DIN cutouts.
    Mechanical Relay Output
    Image of Product. Front orientation. Temperature Controllers. High-Limit Temperature Controllers, For 1/16 DIN Panel Cutout Size.
    Image of Product. Front orientation. Temperature Controllers. High-Limit Temperature Controllers, For 1/4 DIN Panel Cutout Size.

    For 1/16 DIN Panel

    Cutout Size

    For 1/4 DIN Panel

    Cutout Size

    SPDT—Controllers that are SPDT (single pole, double throw) can turn one circuit from off to on (normally open) or on to off (normally closed).
    SPST-NO—Controllers that are SPST-NO (single pole, single throw) can turn one circuit from off to on (normally open).
    Remote Reset—Remote-reset controllers are best for hard-to-reach locations. To operate, you’ll need to wire the remote reset input terminals, and the sensor must be below the set temperature.
    Mechanical Relay
    For Thermocouple Probe Type
    Total No.
    of Outputs
    Output Type
    Switch
    Designation
    Max. Switching Current
    @ Voltage
    For Probe
    Type
    Reset
    Type
    Input Voltage
    Range, V AC
    Ht.
    Wd.
    Dp.
    Enclosure
    Rating
    Features
    Each
    For 1/16 DIN Panel Cutout Size–For 1 3/4" Ht. × 1 3/4" Wd. Panel Cutout
    B, C, E, J, K, L, N, PL-II, R, S, T1Heating—1 Mechanical RelaySPDT
    2 amp @ 240V ACThermocoupleManual90 to 2641 7/8"1 7/8"3 3/4"IP20, IP30
    Indicator Icons, Remote Reset5916N110000000
    B, C, E, J, K, L, N, PL-II, R, S, T2Heating—1 Mechanical Relay
    Heating—1 Mechanical Relay
    SPDT
    SPST-NO
    2 amp @ 240V ACThermocoupleManual90 to 2641 7/8"1 7/8"3 3/4"IP20, IP30
    5916N13000000
     
    For 1/4 DIN Panel Cutout Size–For 3 5/8" Ht. × 3 5/8" Wd. Panel Cutout
    B, C, E, J, K, L, N, PL-II, R, S, T2Heating—1 Mechanical Relay
    Heating—1 Mechanical Relay
    SPDT2 amp @ 240V ACThermocoupleManual90 to 2503 3/4"3 3/4"2 9/16"IP20, IP30
    Remote Reset5916N12000000
     
    Accessories for Temperature Controllers
    back to top