Housing is plastic.

Measure tension force as well as weight.

The large dial makes these gauges easy to read. They measure tension force as well as weight.

Measure the tension of wire and filament without pausing your operation.

Use the included Windows-compatible software to upload measurement data.

Read tension and compression measurements with a glance—these gauges have three color-coded indicator lights to show you if a part is at your desired force. Red means the force is too high, orange means too low, and green is just right.

Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.

Grip paper, film, and thin plastic.

Grab and pull objects to test their strength. These hooks thread onto the shaft of your force gauge.

Measure the force needed to carry out tasks in your facility, such as pushing carts, pulling pallet trucks, or lifting containers.

Designed to test the pull and push force of springs, insert these testers into your quality control line right out of the box.

Calculate how hard it is to peel tape off a surface, separate the layers within a laminate, or unfasten a hook and loop.

Determine if an adhesive or an epoxy creates a strong enough bond on a surface.

A sealed aluminum housing protects from corrosion in wet environments.

Attach the bar handle to these scales for weighing by hand.

Suspend items from the bottom hook and read their weights on the classic dial face.

Also known as junction and summing boxes, these hubs combine the measurements of multiple tension and compression force sensors together.

With a sensor that’s already calibrated and everything you need to relay data, these kits come ready to operate. Use them to measure forces in equipment and send the data directly to a computer or PLC to monitor, document, and trigger actions in machinery.

Check the tension of your machine’s flat, timing, or V-belt—no matter its width. These gauges use ultrasonic sound waves to take noncontact readings.