McMaster-Carr logo
    Filter by
    Number of Circuits
    Attribute Image
    Mounting Location
    System of Measurement
    Number of Terminals per Circuit
    DIN Rail Trade Size
    Number of Mounting Holes
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Maximum Temperature
    Terminal Center-to-Center
    Attribute Image
    DFARS Specialty Metals
    Minimum Temperature
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    428 Products

    Modular DIN-Rail Mount Terminal Blocks

    Image of System. Front orientation. Contains Annotated. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks.
    Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
    The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. If you need to change wiring frequently without adjusting a screw, consider a quick-connect terminal block with spring-clamp or lever-clamp terminals.
    Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Screw-Clamp Terminals.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.
    Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.
    Terminal Blocks
    Covers
    End Stops
    Bar Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    Choose a Color
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
     
    380V AC—22 amp per Circuit
    3220 to 126813IP20
    Gray0000000000000000000000000000000000000000000Noninsulated0000000000000
     
    600V AC—32 amp per Circuit
    1622 to 12687.51, 3IP20
    Black000000000000000000———0———0———0
     
    630V AC/630V DC—24 amp per Circuit
    2222 to 12565.51, 3IP20
    Beige000000000000000000000000000000000000000Insulated0000000000000
    2222 to 12565.51, 3IP20
    Blue000000000000000000000000000000000000000Insulated0000000000000
    2222 to 12565.51, 3IP20
    Gray000000000000000000000000000000000000000Insulated0000000000000
     
    800V AC—32 amp per Circuit
    2222 to 12665.51, 3IP20
    Beige
    ,
    Black
    ,
    Blue
    ,
    Gray
    ,
    Green
    ,
    Orange
    ,
    Red
    ,
    White
    ,
    Yellow
    0000000000000000000000000000000000000Noninsulated000000000000
     
    800V AC/800V DC—32 amp per Circuit
    1322 to 10651.51, 3IP20
    Gray000000000000000000000000000000000000000Insulated0000000000000
    1422 to 10663.51, 3IP20
    Gray000000000000000000000000000000000000000Insulated0000000000000
     
    800V AC—41 amp per Circuit
    2218 to 88881, 3IP20
    Gray000000000000000000000000000000000000000Noninsulated000000000000
     
    1,000V AC—24 amp per Circuit
    1222 to 12544.51, 3IP20
    Beige
    ,
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    White
    ,
    Yellow
    00000000000000000000000000000000000000Noninsulated000000000000
     
    1,000V AC—32 amp per Circuit
    1222 to 10644.51, 3IP20
    Beige
    ,
    Black
    ,
    Blue
    ,
    Gray
    ,
    Green
    ,
    Orange
    ,
    Red
    ,
    White
    ,
    Yellow
    0000000000000000000000000000000000000Noninsulated00000000000
     
    1,000V AC—41 amp per Circuit
    1222 to 8844.51, 3IP20
    Beige
    ,
    Black
    ,
    Blue
    ,
    Gray
    ,
    Green
    ,
    Orange
    ,
    Red
    ,
    White
    ,
    Yellow
    0000000000000000000000000000000000000Noninsulated000000000000
     
    1,000V AC—57 amp per Circuit
    1220 to 61044.51, 3IP20
    Beige
    ,
    Black
    ,
    Blue
    ,
    Gray
    ,
    Red
    ,
    White
    ,
    Yellow
    0000000000000000000000000000000000000Noninsulated000000000000
     
    1,000V AC—76 amp per Circuit
    1218 to 61245.51, 3IP20
    Black
    ,
    Blue
    ,
    Gray
    ,
    Red
    ,
    White
    ,
    Yellow
    000000000000000000000000000000000000000Noninsulated0000000000000
     
    1,000V AC—125 amp per Circuit
    1210 to 1/016491, 3IP20
    Black
    ,
    Blue
    ,
    Gray
    ,
    Red
    ,
    White
    ,
    Yellow
    0000000000000000———000000000000Noninsulated0000000000000
     
    Markers
    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    1, 25100White000000000000000000
    1, 26100White000000000000000
    1, 28, 10, 12, 13, 16, 22100White0000000000000000
     
    Numbered for Horizontal Rails
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Ground Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Ground Terminal Blocks with Screw-Clamp Terminals.
    Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Terminal Blocks
    End Stops
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    1222 to 12543.5Green/Yellow1, 3IP20
    000000000000000000000000000000
    1222 to 12643.8Green/Yellow1, 3IP20
    00000000000000000000000000
    1222 to 8843.8Green/Yellow1, 3IP20
    00000000000000000000000000
    1220 to 61043.8Green/Yellow1, 3IP20
    00000000000000000000000000
    1214 to 41249.5Green/Yellow1, 3IP20
    000000000000000000000000000
    128 to 1/01649Green/Yellow1, 3IP20
    0000000000000000000000000000
    1422 to 10663.5Green/Yellow1, 3IP20
    000000000000000000000000000
    1722 to 12690Green/Yellow1, 3IP20
    000000000000000000000000000000
     
    Markers
    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    1, 25100White000000000000000000
    1, 26100White000000000000000
    1, 28, 10, 12, 13, 16, 22100White0000000000000000
     
    Numbered for Horizontal Rails
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Fuse Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Fuse Terminal Blocks with Screw-Clamp Terminals.
    Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.
    Blown Fuse Indicator—A light goes on when the fuse blows, so you can spot an overloaded circuit without cutting power or touching equipment.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.
    Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.
    Terminal Blocks
    Covers
    End Stops
    Bar Jumpers
    For Fuse
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Trade
    Size
    Overall
    Dia.
    Overall
    Lg.
    Type
    Circuit Status
    Indicator Type
    Blown Fuse Indicator
    Voltage
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    Choose a
    Color
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
     
    300V AC/300V DC—6.3 amp per Circuit
    2
    1 (Ground)
    2
    1 (Ground)
    20 to 128995 mm20 mmCeramic, Glass3IP20
    Gray0000000000000000000000000000000000000000000000Noninsulated0000000000000
    2
    1 (Ground)
    2
    1 (Ground)
    20 to 128995 mm20 mmCeramic, GlassBlown Fuse24V DC
    60V DC
    110V AC
    3IP20
    Gray000000000000000000000000000000000000000000Noninsulated000000000000
    2
    1 (Ground)
    2
    1 (Ground)
    20 to 128995 mm20 mmCeramic, GlassBlown Fuse110V AC
    230V AC
    3IP20
    Gray000000000000000000000000000000000000000000Noninsulated000000000000
     
    400V AC/400V DC—6.3 amp per Circuit
    1222 to 128565 mm20 mmCeramic, GlassBlown Fuse24V AC
    24V DC
    1, 3IP20
    Gray0000000000000000000000000000000000000000———0
    1222 to 128565 mm20 mmCeramic, GlassBlown Fuse110V AC
    230V AC
    1, 3IP20
    Gray0000000000000000000000000000000000000000———0
     
    600V AC—6.3 amp per Circuit
    2224 to 12885.55 mm20 mmCeramic, GlassBlown Fuse110V AC
    230V AC
    1, 3IP20
    Gray000000000000000000000000000000000000000000Insulated0000000000000
    2212
    885.55 mm20 mmCeramic, GlassBlown Fuse24V AC
    24V DC
    1, 3IP20
    Gray000000000000000000000000000000000000000000Insulated0000000000000
     
    630V AC—6.3 amp per Circuit
    1222 to 128565 mm20 mmCeramic, Glass1, 3IP20
    Gray
    ,
    Orange
    0000000000000000000000000000000000000———0
     
    630V AC/630V DC—6.3 amp per Circuit
    2224 to 12885.55 mm20 mmCeramic, Glass1, 3IP20
    Gray000000000000000000000000000000000000000000Insulated0000000000000
     
    800V AC/800V DC—10 amp per Circuit
    1222 to 101385.13AG1/4"GlassBlown Fuse24V AC
    24V DC
    1, 3IP20
    Black0000000000000000000000000000000000000000———0
    1222 to 101385.13AG1/4"GlassBlown Fuse110V AC
    230V AC
    1, 3IP20
    Black0000000000000000000000000000000000000000———0
     
    800V AC—16 amp per Circuit
    1222 to 101385.13AG1/4"Glass1, 3IP20
    Black00000000000000000000000000000000000000———0
     
    800V AC—30 amp per Circuit
    1218 to 62290.713/32"1 1/2"Cartridge1, 3IP20
    Gray000000000000000000———000000000000———0
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    1, 28, 10, 12, 13, 16, 22100White000000000000000000
     
    Numbered for Horizontal Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Disconnect Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Screw-Clamp Terminals.
    Test and troubleshoot circuits without removing any wire. Flip the tab by hand or with a screwdriver to open and close the circuit.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
     
    320V AC/320V DC—10 amp per Circuit
    1212
    544.5Gray/Orange1, 3IP20
    000000000000000000000000000000000000000000Noninsulated0000000000000
     
    400V AC—15 amp per Circuit
    1222 to 10847Gray1, 3IP20
    00000000000000000000000000000000000000Insulated000000000000
     
    400V AC—20 amp per Circuit
    1222 to 10644.5Gray1, 3IP20
    00000000000000000000000000000000000000Insulated000000000000
     
    Markers
    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    1, 25100White000000000000000000
    1, 26100White000000000000000
    1, 28, 10, 12, 13, 16, 22100White0000000000000000
     
    Numbered for Horizontal Rails
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.
    1, 251 to 100100White000000000000000
    1, 25101 to 200100White000000000000000
    1, 261 to 100100White000000000000000
    1, 26101 to 200100White000000000000000
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals.
    Plug voltage meters into the built-in sockets to confirm the voltage is right for your application. You can also test and troubleshoot circuits without removing any wire. Push, turn, and release the knob to break your connection. When the knob is released, stick a wire through the hole so you can't accidentally reconnect the circuit—similar to a lockout tag.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    Test Plugs
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
    Each
     
    500V AC/500V DC—15 amp per Circuit
    1222 to 8855.5Gray/Black1, 3IP10
    0000000000000000000000000000000000000000000Insulated00000000000000000000000000
    1222 to 8855.5Gray/Red1, 3IP10
    000000000000000000000000000000000000000Insulated000000000000000000000000
    1222 to 8855.5Gray/Yellow1, 3IP10
    000000000000000000000000000000000000000Insulated000000000000000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    1, 28, 10, 12, 13, 16, 22100White000000000000000000
     
    Numbered for Horizontal Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     

    Quick-Connect Modular DIN-Rail Mount Terminal Blocks

    Image of System. Front orientation. Contains Annotated. Terminal Blocks. Quick-Connect Modular DIN-Rail Mount Terminal Blocks.
    Pop wire in and out of these terminal blocks without adjusting a screw. Lift the clamp with a screwdriver or built-in lever, then release the clamp down onto the wire. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.
    Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
    Terminal Blocks with Spring-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Quick-Connect Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Spring-Clamp Terminals.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Alternate Jumpers—Connect terminals on two blocks of the same width, skipping a block in between. This reduces wire clutter and gives you flexibility to adjust your set-up in the future.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    Alternate Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    For DIN Rail
    Trade Size
    Choose a Color
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
    Insulation
    Each
     
    300V AC/300V DC—15 amp per Circuit
    2228 to 125643
    Blue
    ,
    Gray
    00000000000000000000000000000000000000000000Insulated0000000000000Insulated0000000000000
    3228 to 1251033
    Blue
    ,
    Gray
    000000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—15 amp per Circuit
    1222 to 144.248.53
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    0000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1322 to 144.259.53
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    0000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1422 to 144.2703
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    0000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—20 amp per Circuit
    1228 to 125533
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    00000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1228 to 126593
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1328 to 125643
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    00000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1328 to 12673.53
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1428 to 125753
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1428 to 126863
    Black
    ,
    Blue
    ,
    Gray
    ,
    Orange
    ,
    Red
    ,
    Yellow
    000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    2228 to 12673.53
    Blue
    ,
    Gray
    0000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—30 amp per Circuit
    1224 to 10874.53
    Blue
    ,
    Gray
    ,
    Orange
    000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1324 to 108933
    Blue
    ,
    Gray
    ,
    Orange
    000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—50 amp per Circuit
    1224 to 810783
    Blue
    ,
    Gray
    ,
    Orange
    000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1324 to 81097.53
    Blue
    ,
    Gray
    ,
    Orange
    00000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    600V AC/600V DC—65 amp per Circuit
    1224 to 61294.53
    Blue
    ,
    Gray
    ,
    Orange
    0000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
    1324 to 612104.53
    Blue
    ,
    Gray
    ,
    Orange
    00000000000000000000000000000000000000000———0Insulated000000000000
     
    600V AC/600V DC—115 amp per Circuit
    128 to 2161003
    Blue
    ,
    Gray
    00000000000000000———0000000000000Insulated000000000000———0
     
    600V AC/600V DC—200 amp per Circuit
    124 to 4/0251073
    Blue
    ,
    Gray
    00000000000000000———0000000000000Insulated0000000000000———0
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For Terminal Block Wd., mm
    Number
    Range
    Includes
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    4.2100White000000000000000000
    5, 6, 8, 10, 12, 16, 25100White0000000000000000
     
    Numbered for Horizontal Rails
    4.21 to 50Two of Each Number100White00000000000000000
    5, 6, 8, 10, 12, 16, 251 to 50Two of Each Number100White00000000000000000
     
    Numbered for Vertical Rails
    4.21 to 50Two of Each Number100White00000000000000000
    5, 6, 8, 10, 12, 16, 251 to 50Two of Each Number100White00000000000000000
     
    Ground Terminal Blocks with Spring-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Quick-Connect Modular DIN-Rail Mount Terminal Blocks, Ground Terminal Blocks with Spring-Clamp Terminals.
    Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
    1228 to 12553Green/Yellow300000000000000000000000000000000000000000000Insulated0000000000000
    1228 to 12659Green/Yellow30000000000000000000000000000000000000000Insulated000000000000
    1224 to 10874.5Green/Yellow300000000000000000000000000000000000000000Insulated000000000000
    1224 to 81078Green/Yellow300000000000000000000000000000000000000000Insulated000000000000
    1224 to 61294.5Green/Yellow300000000000000000000000000000000000000000Insulated000000000000
    1222 to 144.250.8Green/Yellow30000000000000000000000000000000000000000———0
    128 to 216100Green/Yellow300000000000000000———0000000000000———0
    124 to 4/025107Green/Yellow3000000000000000000———0000000000000———0
    1328 to 12564Green/Yellow30000000000000000000000000000000000000000Insulated000000000000
    1328 to 12673.5Green/Yellow30000000000000000000000000000000000000000Insulated000000000000
    1324 to 10893Green/Yellow300000000000000000000000000000000000000000Insulated000000000000
    1324 to 81097.5Green/Yellow300000000000000000000000000000000000000000Insulated000000000000
    1324 to 612104.5Green/Yellow300000000000000000000000000000000000000000Insulated000000000000
    1322 to 144.259.5Green/Yellow30000000000000000000000000000000000000000———0
    1428 to 12564Green/Yellow3000000000000000000000000000000000000000000Insulated000000000000
    1428 to 12575Green/Yellow30000000000000000000000000000000000000000Insulated000000000000
    1428 to 12686Green/Yellow30000000000000000000000000000000000000000Insulated000000000000
    1422 to 144.270Green/Yellow30000000000000000000000000000000000000000———0
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For Terminal Block Wd., mm
    Number
    Range
    Includes
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    4.2100White000000000000000000
    5, 6, 8, 10, 12, 16, 25100White0000000000000000
     
    Numbered for Horizontal Rails
    4.21 to 50Two of Each Number100White00000000000000000
    5, 6, 8, 10, 12, 16, 251 to 50Two of Each Number100White00000000000000000
     
    Numbered for Vertical Rails
    4.21 to 50Two of Each Number100White00000000000000000
    5, 6, 8, 10, 12, 16, 251 to 50Two of Each Number100White00000000000000000
     
    Disconnect Terminal Blocks with Spring-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Quick-Connect Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Spring-Clamp Terminals.
    Test and troubleshoot circuits without removing any wire. Flip the tab by hand or with a screwdriver to open and close the circuit.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
    Alternate Jumpers—Connect terminals on two blocks of the same width, skipping a block in between. This reduces wire clutter and gives you flexibility to adjust your set-up in the future.
    Terminal Blocks
    Covers
    End Stops
    Adjacent Jumpers
    Alternate Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
    Insulation
    Each
     
    600V AC/600V DC—15 amp per Circuit
    1228 to 12569.5Gray3000000000000000000000000000000000000000000000Insulated0000000000000Insulated0000000000000
     
    600V AC/600V DC—30 amp per Circuit
    1224 to 10885Gray3000000000000000000000000000000000000000000Insulated000000000000Insulated000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For Terminal Block Wd., mm
    Number
    Range
    Includes
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    5, 6, 8, 10, 12, 16, 25100White000000000000000000
     
    Numbered for Horizontal Rails
    5, 6, 8, 10, 12, 16, 251 to 50Two of Each Number100White00000000000000000
     
    Numbered for Vertical Rails
    5, 6, 8, 10, 12, 16, 251 to 50Two of Each Number100White00000000000000000
     

    Space-Saving Modular DIN-Rail Mount Terminal Blocks

    Image of System. Front orientation. Contains Annotated. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks.
    These handle the same voltage and power as our other modular blocks while taking up about half the vertical space. Snap them onto DIN 2 rail (also known as mini rail), which is lower in height than DIN 3 rail.
    The screw-clamp or spring-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.
    Mix and match blocks to get the exact number of circuits you need in a single setup. Add terminal blocks for fuses and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
    Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Screw-Clamp Terminals.
    A screw presses the clamp onto the wire for a secure hold.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.
    Noninsulated—Terminal blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.
    Terminal Blocks
    Covers
    End Stops
    Bar Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    Choose a
    Color
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
     
    250V AC—20 amp per Circuit
    1228 to 12527.52IP20
    Gray00000000000000000000000000000000000000000Noninsulated0000000000000
     
    500V AC—17.5 amp per Circuit
    1224 to 164282IP20
    Gray000000000000000000000000000000000000000Noninsulated0000000000000
     
    500V AC—30 amp per Circuit
    1222 to 126282IP20
    Blue
    ,
    Gray
    00000000000000000000000000000000000000Noninsulated000000000000
     
    Markers
    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal
    Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    14100White000000000000000000
    15100White0000000000000000
    16100White0000000000000000
     
    Numbered for Horizontal Rails
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    141 to 100100White0000000000000000
    151 to 100100White0000000000000000
    15101 to 200100White0000000000000000
    161 to 100100White0000000000000000
    16101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.
    141 to 100100White0000000000000000
    14101 to 200100White0000000000000000
    151 to 100100White0000000000000000
    15101 to 200100White0000000000000000
    161 to 100100White0000000000000000
    16101 to 200100White0000000000000000
     
    Terminal Blocks with Spring-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Spring-Clamp Terminals.
    Instead of fussing with screws, flip the lever to clamp your wire into the terminal.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.
    Terminal Blocks
    Covers
    End Stops
    Bar Jumpers
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    Each
    Insulation
    Each
     
    600V AC/600V DC—24 amp per Circuit
    1226 to 12533Gray2IP20
    000000000000000000000000000000000000000000Insulated0000000000000
    1426 to 121033Gray2IP20
    00000000000000000000000000000000000000Insulated000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.

    Blank

    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.

    Numbered

    for

    Horizontal

    Rails

    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    15100White000000000000000000
    1, 28, 10, 12, 13, 16, 22100White0000000000000000
     
    Numbered for Horizontal Rails
    151 to 100100White0000000000000000
    15101 to 200100White0000000000000000
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    151 to 100100White0000000000000000
    15101 to 200100White0000000000000000
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Ground Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Ground Terminal Blocks with Screw-Clamp Terminals.
    Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.
    A screw presses the clamp onto the wire for a secure hold.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Terminal Blocks
    Covers
    End Stops
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    Each
    1222 to 12628Green/Yellow2IP20
    000000000000000000000000000000000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal
    Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    16100White000000000000000000
     
    Numbered for Horizontal Rails
    161 to 100100White0000000000000000
    16101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    161 to 100100White0000000000000000
    16101 to 200100White0000000000000000
     
    Fuse Terminal Blocks with Screw-Clamp Terminals
    Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Fuse Terminal Blocks with Screw-Clamp Terminals.
    Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.
    A screw presses the clamp onto the wire for a secure hold.
    Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
    End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
    Terminal Blocks
    Covers
    End Stops
    For Fuse
    Each
    No. of
    Circuits
    No. of Terminals
    per Circuit
    For Wire
    Ga.
    Wd.,
    mm
    Ht.,
    mm
    Overall
    Dia., mm
    Overall
    Lg., mm
    Type
    Color
    For DIN Rail
    Trade Size
    Enclosure
    Rating
    1-24
    25-Up
    Each
    Each
     
    630V AC—6.3 amp per Circuit
    1218 to 12859.5520Ceramic, GlassGray2IP20
    00000000000000000000000000000000000000000
     
    Markers
    Image of Product. Front orientation. Terminal Block Markers. Blank.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Horizontal Rails.
    Image of Product. Front orientation. Terminal Block Markers. Numbered for Vertical Rails.

    Blank

    Numbered

    for

    Horizontal

    Rails

    Numbered

    for

    Vertical

    Rails

    Label your terminal block connections so you can identify them at a glance.
    Each
    For No. of
    Circuits
    For Terminal Block Wd., mm
    Number
    Range
    Markers
    per Card
    Color
    1-24
    25-Up
    Blank
    1, 28, 10, 12, 13, 16, 22100White000000000000000000
     
    Numbered for Horizontal Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     
    Numbered for Vertical Rails
    1, 28, 10, 12, 13, 16, 221 to 100100White0000000000000000
    1, 28, 10, 12, 13, 16, 22101 to 200100White0000000000000000
     

    Terminal Blocks

    Image of Product. Front orientation. Terminal Blocks. Terminal Blocks.
    Also known as barrier terminal strips, these blocks have dividers to separate live wires and keep your setup tidy. Mount them directly onto control panels, enclosures, and equipment.
    A screw or stud connection creates a tight hold on the wire. You can insert stripped wire directly or attach a terminal to prevent damage from the fastener. Ring, spade, and hook terminals fit around the shank and hang on tightly, even in high-vibration setups. Pin terminals, blade terminals, and wire ferrules are easier to secure with the screw or stud. However, they don't stay put as well as other terminals when vibrated or pulled.
    For DIN 3 Rails—Unlike other surface-mount terminal blocks, these have a notch that snaps onto DIN 3 rail. You can also screw them directly onto your control panel or other surface.
    Covers—Snap onto the top of a terminal block to prevent accidental contact with a live wire. These covers include mounting clips that fit between the block and mounting screws.
    Markers—Label your terminal block connections so you can identify them at a glance. These markers extend from underneath the terminal block.
    Terminal Blocks
    Covers
    Markers
    Mounting
    Holes
    No. of
    Circuits
    For Wire
    Ga.
    Wire
    Connection
    Terminal
    Size
    Terminal
    Ctr.-to-Ctr.
    Lg.
    Wd.
    Ht.
    Max. Temp.,
    ° F
    Color
    For DIN Rail
    Trade Size
    Dia.
    No.
    of
    Each
    Each
    Each
     
    300V AC/300V DC—20 amp per Circuit
    222 to 12Screw TerminalNo. 6
    3/8"1 7/16"7/8"1/2"257Black0.17"400000000000000000000000000000000000000
    322 to 12Screw TerminalNo. 6
    3/8"1 3/4"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    422 to 12Screw TerminalNo. 6
    3/8"2 3/16"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    522 to 12Screw TerminalNo. 6
    3/8"2 1/2"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    622 to 12Screw TerminalNo. 6
    3/8"2 15/16"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    722 to 12Screw TerminalNo. 6
    3/8"3 1/4"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    822 to 12Screw TerminalNo. 6
    3/8"3 11/16"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    922 to 12Screw TerminalNo. 6
    3/8"4"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    1022 to 12Screw TerminalNo. 6
    3/8"4 7/16"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    1222 to 12Screw TerminalNo. 6
    3/8"5 3/16"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    1422 to 12Screw TerminalNo. 6
    3/8"5 15/16"7/8"1/2"257Black0.17"400000000000000000000000000000000000
    1622 to 12Screw TerminalNo. 6
    3/8"6 11/16"7/8"1/2"257Black0.17"4000000000000000000000000000000000000
    1822 to 12Screw TerminalNo. 6
    3/8"7 7/16"7/8"1/2"257Black0.17"4000000000000000000000000000000000000
    2022 to 12Screw TerminalNo. 6
    3/8"8 3/16"7/8"1/2"257Black0.17"4000000000000000000000000000000000000
     
    300V AC/300V DC—30 amp per Circuit
    222 to 12Screw TerminalNo. 6
    7/16"1 5/8"1 1/8"1/2"257Black0.18"400000000000000000000000000000000000
    322 to 12Screw TerminalNo. 6
    7/16"2 1/16"1 1/8"1/2"257Black0.18"400000000000000000000000000000000000
    422 to 12Screw TerminalNo. 6
    7/16"2 1/2"1 1/8"1/2"257Black0.18"400000000000000000000000000000000000
    522 to 12Screw TerminalNo. 6
    7/16"2 15/16"1 1/8"1/2"257Black0.18"400000000000000000000000000000000000
    622 to 12Screw TerminalNo. 6
    7/16"3 3/8"1 1/8"1/2"257Black0.18"400000000000000000000000000000000000
    722 to 12Screw TerminalNo. 6
    7/16"3 13/16"1 1/8"1/2"257Black0.18"400000000000000000000000000000000000
    822 to 12Screw TerminalNo. 6
    7/16"4 1/4"1 1/8"1/2"257Black0.18"400000000000000000000000000000000000
    922 to 12Screw TerminalNo. 6
    7/16"4 11/16"1 1/8"1/2"257Black0.18"4000000000000000000000000000000000000
    1022 to 12Screw TerminalNo. 6
    7/16"5 1/8"1 1/8"1/2"257Black0.18"4000000000000000000000000000000000000
    1222 to 12Screw TerminalNo. 6
    7/16"6"1 1/8"1/2"257Black0.18"4000000000000000000000000000000000000
    1422 to 12Screw TerminalNo. 6
    7/16"6 7/8"1 1/8"1/2"257Black0.18"4000000000000000000000000000000000000
    1622 to 12Screw TerminalNo. 6
    7/16"7 3/4"1 1/8"1/2"257Black0.18"4000000000000000000000000000000000000
    1822 to 12Screw TerminalNo. 6
    7/16"8 5/8"1 1/8"1/2"257Black0.18"4000000000000000000000000000000000000
    2022 to 12Screw TerminalNo. 6
    7/16"9 1/2"1 1/8"1/2"257Black0.18"4000000000000000000000000000000000000
     
    600V AC/600V DC—20 amp per Circuit
    222 to 12Screw TerminalNo. 6
    7/16"1 5/8"1 3/8"3/4"257Black0.18"400000000000000000000000000000000000
    322 to 12Screw TerminalNo. 6
    7/16"2 1/16"1 3/8"3/4"257Black0.18"400000000000000000000000000000000000
    422 to 12Screw TerminalNo. 6
    7/16"2 1/2"1 3/8"3/4"257Black0.18"400000000000000000000000000000000000
    522 to 12Screw TerminalNo. 6
    7/16"2 15/16"1 3/8"3/4"257Black0.18"400000000000000000000000000000000000
    622 to 12Screw TerminalNo. 6
    7/16"3 3/8"1 3/8"3/4"257Black0.18"400000000000000000000000000000000000
    722 to 12Screw TerminalNo. 6
    7/16"3 13/16"1 3/8"3/4"257Black0.18"4000000000000000000000000000000000000
    822 to 12Screw TerminalNo. 6
    7/16"4 1/4"1 3/8"3/4"257Black0.18"4000000000000000000000000000000000000
    922 to 12Screw TerminalNo. 6
    7/16"4 11/16"1 3/8"3/4"257Black0.18"4000000000000000000000000000000000000
    1022 to 12Screw TerminalNo. 6
    7/16"5 1/8"1 3/8"3/4"257Black0.18"4000000000000000000000000000000000000
    1222 to 12Screw TerminalNo. 6
    7/16"6"1 3/8"3/4"257Black0.18"4000000000000000000000000000000000000
    1422 to 12Screw TerminalNo. 6
    7/16"6 7/8"1 3/8"3/4"257Black0.18"4000000000000000000000000000000000000
    1622 to 12Screw TerminalNo. 6
    7/16"7 3/4"1 3/8"3/4"257Black0.18"4000000000000000000000000000000000000
    1822 to 12Screw TerminalNo. 6
    7/16"8 5/8"1 3/8"3/4"257Black0.18"4000000000000000000000000000000000000
    2022 to 12Screw TerminalNo. 6
    7/16"9 1/2"1 3/8"3/4"257Black0.18"4000000000000000000000000000000000000
     
    600V AC/600V DC—30 amp per Circuit
    214 to 12Screw TerminalNo. 8
    9/16"2 1/8"1 5/16"11/16"257Black0.22"400000000000000000000000000000000000
    314 to 12Screw TerminalNo. 8
    9/16"2 11/16"1 5/16"11/16"257Black0.22"400000000000000000000000000000000000
    414 to 12Screw TerminalNo. 8
    9/16"3 1/4"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    514 to 12Screw TerminalNo. 8
    9/16"3 13/16"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    614 to 12Screw TerminalNo. 8
    9/16"4 3/8"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    714 to 12Screw TerminalNo. 8
    9/16"4 15/16"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    814 to 12Screw TerminalNo. 8
    9/16"5 1/2"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    914 to 12Screw TerminalNo. 8
    9/16"6 1/16"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    1014 to 12Screw TerminalNo. 8
    9/16"6 5/8"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    1214 to 12Screw TerminalNo. 8
    9/16"7 3/4"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    1414 to 12Screw TerminalNo. 8
    9/16"8 7/8"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    1614 to 12Screw TerminalNo. 8
    9/16"10"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    1814 to 12Screw TerminalNo. 8
    9/16"11 1/8"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
    2014 to 12Screw TerminalNo. 8
    9/16"12 1/4"1 5/16"11/16"257Black0.22"4000000000000000000000000000000000000
     
    600V AC/600V DC—75 amp per Circuit
    214 to 6Screw TerminalNo. 10
    11/16"2 1/2"1 13/16"3/4"266Black0.22"40000000000000———0———0
    314 to 6Screw TerminalNo. 10
    11/16"3 3/16"1 13/16"3/4"266Black0.22"40000000000000———0———0
    414 to 6Screw TerminalNo. 10
    11/16"3 7/8"1 13/16"3/4"266Black0.22"40000000000000———0———0
    514 to 6Screw TerminalNo. 10
    11/16"4 9/16"1 13/16"3/4"266Black0.22"40000000000000———0———0
    614 to 6Screw TerminalNo. 10
    11/16"5 1/4"1 13/16"3/4"266Black0.22"40000000000000———0———0
    714 to 6Screw TerminalNo. 10
    11/16"5 15/16"1 13/16"3/4"266Black0.22"40000000000000———0———0
    814 to 6Screw TerminalNo. 10
    11/16"6 11/16"1 13/16"3/4"266Black0.22"40000000000000———0———0
    914 to 6Screw TerminalNo. 10
    11/16"7 5/16"1 13/16"3/4"266Black0.22"40000000000000———0———0
    1014 to 6Screw TerminalNo. 10
    11/16"8"1 13/16"3/4"266Black0.22"40000000000000———0———0
    1214 to 6Screw TerminalNo. 10
    11/16"9 3/8"1 13/16"3/4"266Black0.22"40000000000000———0———0
     
    600V AC/600V DC—200 amp per Circuit
    214 to 2Stud Terminal1/4"
    13/16"1 7/8"3"2 7/16"257Black30.22"4000000000000———0———0
    314 to 2Stud Terminal1/4"
    13/16"2 9/16"3"2 7/16"257Black30.22"6000000000000———0———0
     
    Accessories for Terminal Blocks
    Jumpers
    Over-Barrier Jumper—Fit these jumpers over terminal block dividers to leave free space on the side. They connect adjacent terminals so you can connect multiple components with a single wire.
    Around-Barrier Jumper—These jumpers bend around the divider for a lower profile than over-barrier jumpers. They connect adjacent terminals so you can connect multiple components with a single wire.
    For No. of
    Circuits
    For Terminal Block Voltage
    Pkg.
    Qty.
    Pkg.
    Over-Barrier Jumper
    Image of Product. Over Barrier Jumper. Front orientation. Terminal Block Jumpers. Terminal Blocks, Over-Barrier Jumper.

    Over

    Barrier

    Jumper

     
    For 3/8" Terminal Center-to-Center
    2300V AC/300V DC250000000000000
     
    For 7/16" Terminal Center-to-Center
    2300V AC/300V DC25000000000000
    2600V AC/600V DC100000000000
     
    For 9/16" Terminal Center-to-Center
    2600V AC/600V DC100000000000
     
    For 11/16" Terminal Center-to-Center
    2600V AC/600V DC100000000000
     
    Around-Barrier Jumper
    Image of Product. Around Barrier Jumper. Front orientation. Terminal Block Jumpers. Terminal Blocks, Around-Barrier Jumper.

    Around Barrier

    Jumper

     
    For 3/8" Terminal Center-to-Center
    2300V AC/300V DC1000000000000
    3300V AC/300V DC1000000000000
    4300V AC/300V DC1000000000000
    5300V AC/300V DC1000000000000
    6300V AC/300V DC1000000000000
    7300V AC/300V DC1000000000000
    8300V AC/300V DC1000000000000
    9300V AC/300V DC1000000000000
    10300V AC/300V DC1000000000000
    12300V AC/300V DC1000000000000
    14300V AC/300V DC1000000000000
    16300V AC/300V DC1000000000000
    18300V AC/300V DC1000000000000
    20300V AC/300V DC1000000000000
     
    For 7/16" Terminal Center-to-Center
    2300V AC/300V DC/600V AC/600V DC1000000000000
    3300V AC/300V DC/600V AC/600V DC1000000000000
    4300V AC/300V DC/600V AC/600V DC1000000000000
    5300V AC/300V DC/600V AC/600V DC1000000000000
    6300V AC/300V DC/600V AC/600V DC1000000000000
    7300V AC/300V DC/600V AC/600V DC1000000000000
    8300V AC/300V DC/600V AC/600V DC1000000000000
    9300V AC/300V DC/600V AC/600V DC1000000000000
    10300V AC/300V DC/600V AC/600V DC1000000000000
    12300V AC/300V DC/600V AC/600V DC1000000000000
    14300V AC/300V DC/600V AC/600V DC1000000000000
    16300V AC/300V DC/600V AC/600V DC1000000000000
    18300V AC/300V DC/600V AC/600V DC1000000000000
    20300V AC/300V DC/600V AC/600V DC1000000000000
     
    Quick-Disconnect Adapters
    Image of Product. Straight. Front orientation. Terminal Block Adapters. Straight.

    Straight

    Image of Product. 90° Angle. Front orientation. Terminal Block Adapters. 90° Angle.

    90° Angle

    Image of Product. 45° Angle. Front orientation. Terminal Block Adapters. 45° Angle.

    45° Angle

    Convert screw terminal connections into quick-disconnect terminal connections.
    Shape
    For Terminal Block Voltage
    Tab
    Wd.
    Pkg.
    Qty.
    Pkg.
    For 3/8" Terminal Center-to-Center
    Straight300V AC/300V DC0.187"250000000000000
    90° Angle300V AC/300V DC0.187"25000000000000
    45° Angle300V AC/300V DC0.187"25000000000000
     
    For 7/16" Terminal Center-to-Center
    Straight300V AC/300V DC/600V AC/600V DC0.250"25000000000000
    90° Angle300V AC/300V DC/600V AC/600V DC0.250"25000000000000
    45° Angle300V AC/300V DC/600V AC/600V DC0.250"25000000000000
     
    For 9/16" Terminal Center-to-Center
    Straight300V AC/300V DC/600V AC/600V DC0.250"25000000000000
    90° Angle300V AC/300V DC/600V AC/600V DC0.250"25000000000000
    45° Angle300V AC/300V DC/600V AC/600V DC0.250"25000000000000
     
    back to top