Filter by
Wire Connection
Mounting Location
Electrical Connection
DIN Rail Trade Size
Current per Circuit
DIN Rail Height
Height
Grounding
REACH
U.S.–Mexico–Canada Agreement (USMCA) Qualifying
RoHS
Export Control Classification Number (ECCN)
Maximum Temperature
DFARS Specialty Metals
Quick-Connect Modular DIN-Rail Mount Terminal Blocks
 |
Pop wire in and out of these terminal blocks without adjusting a screw. Lift the clamp with a screwdriver or built-in lever, then release the clamp down onto the wire. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.
Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
Terminal Blocks with Lever- and Spring-Clamp Terminals
 |
Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
Terminal Blocks | Covers | End Stops | Adjacent Jumpers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Circuits | No. of Terminals per Circuit | For Wire Ga. | Wd., mm | Ht., mm | Color | For DIN Rail Trade Size | Each | Each | Each | Insulation | Each | ||||||
600V AC/600V DC—5 amp per Circuit | |||||||||||||||||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 8 | 7.5 | 74.8 | Blue | 3 | 4036N25 | 00000 | 4036N205 | 00000 | 9473T144 | 00000 | Insulated | 4036N303 | 00000 | ||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 8 | 7.5 | 74.8 | Gray | 3 | 4036N24 | 0000 | 4036N205 | 0000 | 9473T144 | 0000 | Insulated | 4036N303 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 8 | 7.5 | 90.8 | Blue | 3 | 4036N28 | 0000 | 4036N206 | 0000 | 9473T144 | 0000 | Insulated | 4036N303 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 8 | 7.5 | 90.8 | Gray | 3 | 4036N27 | 0000 | 4036N206 | 0000 | 9473T144 | 0000 | Insulated | 4036N303 | 0000 | ||
600V AC/600V DC—20 amp per Circuit | |||||||||||||||||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 22 to 12 | 5.2 | 61.5 | Blue | 3 | 4036N12 | 0000 | 4036N201 | 0000 | 9473T144 | 0000 | Insulated | 4036N301 | 0000 | ||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 22 to 12 | 5.2 | 61.5 | Gray | 3 | 4036N11 | 0000 | 4036N201 | 0000 | 9473T144 | 0000 | Insulated | 4036N301 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 22 to 12 | 5.2 | 72.2 | Blue | 3 | 4036N15 | 0000 | 4036N202 | 0000 | 9473T144 | 0000 | Insulated | 4036N301 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 22 to 12 | 5.2 | 72.2 | Gray | 3 | 4036N14 | 0000 | 4036N202 | 0000 | 9473T144 | 0000 | Insulated | 4036N301 | 0000 | ||
600V AC/600V DC—30 amp per Circuit | |||||||||||||||||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 10 | 6.2 | 70 | Blue | 3 | 4036N18 | 0000 | 4036N203 | 0000 | 9473T144 | 0000 | Insulated | 4036N302 | 0000 | ||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 10 | 6.2 | 70 | Gray | 3 | 4036N17 | 0000 | 4036N203 | 0000 | 9473T144 | 0000 | Insulated | 4036N302 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 10 | 6.2 | 83.2 | Blue | 3 | 4036N22 | 0000 | 4036N204 | 0000 | 9473T144 | 0000 | Insulated | 4036N302 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 10 | 6.2 | 83.2 | Gray | 3 | 4036N21 | 0000 | 4036N204 | 0000 | 9473T144 | 0000 | Insulated | 4036N302 | 0000 | ||
600V AC/600V DC—65 amp per Circuit | |||||||||||||||||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 6 | 10 | 89 | Blue | 3 | 4036N32 | 0000 | 4036N207 | 0000 | 9473T144 | 0000 | Insulated | 4036N304 | 0000 | ||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 6 | 10 | 89 | Gray | 3 | 4036N31 | 0000 | 4036N207 | 0000 | 9473T144 | 0000 | Insulated | 4036N304 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 6 | 10 | 110.4 | Blue | 3 | 4036N35 | 00000 | 4036N208 | 0000 | 9473T144 | 0000 | Insulated | 4036N304 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 6 | 10 | 110.4 | Gray | 3 | 4036N34 | 00000 | 4036N208 | 0000 | 9473T144 | 0000 | Insulated | 4036N304 | 0000 | ||
600V AC/600V DC—85 amp per Circuit | |||||||||||||||||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 6 | 12 | 91.5 | Blue | 3 | 4036N38 | 0000 | 4036N209 | 0000 | 9473T144 | 0000 | Insulated | 4036N305 | 0000 | ||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 6 | 12 | 91.5 | Gray | 3 | 4036N37 | 0000 | 4036N209 | 0000 | 9473T144 | 0000 | Insulated | 4036N305 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 6 | 12 | 113.5 | Blue | 3 | 4036N42 | 00000 | 4036N211 | 0000 | 9473T144 | 0000 | Insulated | 4036N305 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 6 | 12 | 113.5 | Gray | 3 | 4036N41 | 00000 | 4036N211 | 0000 | 9473T144 | 0000 | Insulated | 4036N305 | 0000 | ||
 |
Blank |
For Terminal Block Wd., mm | Markers per Card | Color | Each | |||
|---|---|---|---|---|---|---|
Blank | ||||||
| 5.2, 6.2, 7.5, 10, 12 | 100 | White | 4036N401 | 00000 | ||
Ground Terminal Blocks with Lever- and Spring-Clamp Terminals
 |
Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.
Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
Terminal Blocks | Covers | End Stops | Adjacent Jumpers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Circuits | No. of Terminals per Circuit | For Wire Ga. | Wd., mm | Ht., mm | Color | For DIN Rail Trade Size | Each | Each | Each | Insulation | Each | ||||||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 22 to 12 | 5.2 | 63.8 | Green/Yellow | 3 | 4036N13 | 00000 | 4036N201 | 00000 | 9473T144 | 00000 | Insulated | 4036N301 | 00000 | ||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 10 | 6.2 | 70.7 | Green/Yellow | 3 | 4036N19 | 00000 | 4036N203 | 0000 | 9473T144 | 0000 | Insulated | 4036N302 | 0000 | ||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 8 | 7.5 | 75.2 | Green/Yellow | 3 | 4036N26 | 00000 | 4036N205 | 0000 | 9473T144 | 0000 | Insulated | 4036N303 | 0000 | ||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 6 | 10 | 89 | Green/Yellow | 3 | 4036N33 | 00000 | 4036N207 | 0000 | 9473T144 | 0000 | Insulated | 4036N304 | 0000 | ||
| 1 | 1 (Lever Clamp) 1 (Spring Clamp) | 20 to 6 | 12 | 91.5 | Green/Yellow | 3 | 4036N39 | 00000 | 4036N209 | 0000 | 9473T144 | 0000 | Insulated | 4036N305 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 22 to 12 | 5.2 | 72.2 | Green/Yellow | 3 | 4036N16 | 00000 | 4036N202 | 0000 | 9473T144 | 0000 | Insulated | 4036N301 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 10 | 6.2 | 83.2 | Green/Yellow | 3 | 4036N23 | 00000 | 4036N204 | 0000 | 9473T144 | 0000 | Insulated | 4036N302 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 8 | 7.5 | 91.2 | Green/Yellow | 3 | 4036N29 | 00000 | 4036N206 | 0000 | 9473T144 | 0000 | Insulated | 4036N303 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 6 | 10 | 110.4 | Green/Yellow | 3 | 4036N36 | 00000 | 4036N208 | 0000 | 9473T144 | 0000 | Insulated | 4036N304 | 0000 | ||
| 1 | 1 (Lever Clamp) 2 (Spring Clamp) | 20 to 6 | 12 | 113.5 | Green/Yellow | 3 | 4036N43 | 00000 | 4036N211 | 0000 | 9473T144 | 0000 | Insulated | 4036N305 | 0000 | ||
|
Blank |
For Terminal Block Wd., mm | Markers per Card | Color | Each | |||
|---|---|---|---|---|---|---|
Blank | ||||||
| 5.2, 6.2, 7.5, 10, 12 | 100 | White | 4036N401 | 00000 | ||
Sensor Terminal Blocks with Spring-Clamp Terminals
 |
These blocks connect sensors and actuators with NPN and PNP outputs. An LED indicates whether the circuits are powered, making it easier to troubleshoot your system. Mix and match blocks to consolidate wiring for multiple sensors, such as light and photoelectric sensors on a conveyor line. Other terminals on the blocks connect PLCs, data loggers, and other components.
For NPN Signal Output—These blocks light up when a connected NPN sensor sends a negative signal. They're common in Asian automation systems.
For PNP Signal Output—These blocks light up when a connected PNP sensor sends a positive signal. They're common in North American and European automation systems.
Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
Terminal Blocks | Covers | End Stops | Adjacent Jumpers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Circuits | No. of Terminals per Circuit | For Wire Ga. | Wd., mm | Ht., mm | Circuit Status Indicator Type | Color | For DIN Rail Trade Size | Each | Each | Each | Insulation | Each | ||||||
For NPN Signal Output | ||||||||||||||||||
24V AC/24V DC—10 amp per Circuit | ||||||||||||||||||
| 4 | 2 | 24 to 16 | 7 | 81.1 | Power | Gray | 3 | 4280N12 | 000000 | 4280N201 | 00000 | 9473T144 | 00000 | Insulated | 4280N401 | 00000 | ||
For PNP Signal Output | ||||||||||||||||||
24V AC/24V DC—10 amp per Circuit | ||||||||||||||||||
| 4 | 2 | 24 to 16 | 7 | 81.1 | Power | Gray | 3 | 4280N11 | 00000 | 4280N201 | 0000 | 9473T144 | 0000 | Insulated | 4280N401 | 0000 | ||
Quick-Connect Plug-and-Socket Modular DIN-Rail Mount Terminal Blocks
 |
Cut power with the pull of a plug when you need to swap out equipment or adjust your circuit. One of the openings on these blocks is a socket, so you can wire a plug outside the enclosure and then attach it to the socket that’s already in place.
The other connections are spring clamps, so you can pop wire in and out of these terminal blocks without adjusting a screw. Lift the clamp with a screwdriver, then release the clamp down onto the wire. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.
Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.
Sockets with Spring-Clamp Terminals
 |
Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
Terminal Blocks | Covers | End Stops | Adjacent Jumpers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Circuits | No. of Terminals per Circuit | For Wire Ga. | Wd., mm | Ht., mm | Color | For DIN Rail Trade Size | Each | Each | Each | Insulation | Each | ||||||
300V AC/300V DC—10 amp per Circuit | |||||||||||||||||
| 1 | 1 | 24 to 16 | 3.5 | 48.5 | Blue | 3 | 4053N12 | 00000 | 4053N401 | 00000 | 9473T144 | 00000 | Insulated | 4280N401 | 00000 | ||
| 1 | 1 | 24 to 16 | 3.5 | 48.5 | Gray | 3 | 4053N11 | 0000 | 4053N401 | 0000 | 9473T144 | 0000 | Insulated | 4280N401 | 0000 | ||
| 1 | 1 | 24 to 16 | 3.5 | 58.2 | Blue | 3 | 4053N15 | 0000 | 4053N402 | 0000 | 9473T144 | 0000 | Insulated | 4280N401 | 0000 | ||
| 1 | 1 | 24 to 16 | 3.5 | 58.2 | Gray | 3 | 4053N14 | 0000 | 4053N402 | 0000 | 9473T144 | 0000 | Insulated | 4280N401 | 0000 | ||
| 1 | 1 | 24 to 16 | 3.5 | 85.25 | Blue | 3 | 4053N18 | 0000 | 4053N403 | 0000 | 9473T144 | 0000 | Insulated | 4280N401 | 0000 | ||
| 1 | 1 | 24 to 16 | 3.5 | 85.25 | Gray | 3 | 4053N17 | 0000 | 4053N403 | 0000 | 9473T144 | 0000 | Insulated | 4280N401 | 0000 | ||
|
Blank |
For Terminal Block Wd., mm | Markers per Card | Color | Each | |||
|---|---|---|---|---|---|---|
Blank | ||||||
| 3.5 | 100 | White | 4053N501 | 00000 | ||
Ground Sockets with Spring-Clamp Terminals
 |
Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.
Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.
End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.
Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.
Terminal Blocks | Covers | End Stops | Adjacent Jumpers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Circuits | No. of Terminals per Circuit | For Wire Ga. | Wd., mm | Ht., mm | Color | For DIN Rail Trade Size | Each | Each | Each | Insulation | Each | ||||||
| 1 | 1 | 24 to 16 | 3.5 | 50.8 | Green/Yellow | 3 | 4053N13 | 00000 | 4053N401 | 00000 | 9473T144 | 00000 | Insulated | 4280N401 | 00000 | ||
| 1 | 1 | 24 to 16 | 3.5 | 61.8 | Green/Yellow | 3 | 4053N16 | 0000 | 4053N402 | 0000 | 9473T144 | 0000 | Insulated | 4280N401 | 0000 | ||
| 1 | 1 | 24 to 16 | 3.5 | 85.25 | Green/Yellow | 3 | 4053N19 | 0000 | 4053N403 | 0000 | 9473T144 | 0000 | Insulated | 4280N401 | 0000 | ||
|
Blank |
For Terminal Block Wd., mm | Markers per Card | Color | Each | |||
|---|---|---|---|---|---|---|
Blank | ||||||
| 3.5 | 100 | White | 4053N501 | 00000 | ||
Quick-Connect Push-On Wire Connectors
 |
Style B |
These connectors are as quick to install as our clamp-on option, though they're not as easy to adjust. They extend or terminate electrical connections in branch circuits, such as light fixtures and electronic devices. Push wire into place without the need for an installation tool. To break the connection later, you'll have to pull wire back out. The connectors also have test sockets to safely test voltage after installation.
Style B—Join two or more connectors to create the exact setup you need. Slide the flanged side of one connector into the grooved side of another.
DIN Rail Mounting Adapters—Clip connectors onto DIN 3 rail to keep them organized and easily accessible.
Wire Connectors | DIN Rail Mounting Adapters | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wire | |||||||||||||||||
Style | No. of | Ga. | Construction | Insulation Color | Terminal Material | Max. Temp., ° F | Max. Voltage, V AC | No. of Test Sockets | Certification | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
Nylon Insulation | |||||||||||||||||
| B | 4 | 22 to 20 | Solid | Gray | Tin-Plated Copper | 220 | 150 | 1 | CSA Certified, UL Recognized Component | 100 | 9915K24 | 000000 | 10 | 9915K31 | 00000 | ||
| B | 4 | 22 to 20 | Solid | Red | Tin-Plated Copper | 220 | 150 | 1 | CSA Certified, UL Recognized Component | 100 | 9915K25 | 00000 | 10 | 9915K31 | 0000 | ||
| B | 4 | 22 to 20 | Solid | Yellow | Tin-Plated Copper | 220 | 150 | 1 | CSA Certified, UL Recognized Component | 100 | 9915K26 | 00000 | 10 | 9915K31 | 0000 | ||
| B | 8 | 22 to 20 | Solid | Gray | Tin-Plated Copper | 220 | 150 | 1 | CSA Certified, UL Recognized Component | 50 | 9915K27 | 00000 | 10 | 9915K31 | 0000 | ||
| B | 8 | 22 to 20 | Solid | Red | Tin-Plated Copper | 220 | 150 | 1 | CSA Certified, UL Recognized Component | 50 | 9915K28 | 00000 | 10 | 9915K31 | 0000 | ||
| B | 8 | 22 to 20 | Solid | Yellow | Tin-Plated Copper | 220 | 150 | 1 | CSA Certified, UL Recognized Component | 50 | 9915K29 | 00000 | 10 | 9915K31 | 0000 | ||
