Metric Terminals | McMaster-Carr

Filter by

For Wire Gauge

Mounting Location

Color

Number of Circuits

Number of Terminals per Circuit

Wire Connection

Lever-Clamp Terminal

Screw-Clamp Terminal

Spring-Clamp Terminal

System of Measurement

Width

Voltage

DIN Rail Trade Size

DIN Rail Height

Current per Circuit

Grounding

Certification

C-UL Recognized Component

UL Listed

UL Recognized Component

Height

Length

Performance

Fuse Type

Screw Size

Insulation Color

Blue

Red

Yellow

Export Control Classification Number (ECCN)

Maximum Temperature

Insulation

RoHS

Compliant with Exemptions

Not Compliant

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Forward

How can we improve?

307 Products

Modular DIN-Rail Mount Terminal Blocks

Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. If you need to change wiring frequently without adjusting a screw, consider a quick-connect terminal block with spring-clamp or lever-clamp terminals.

Terminal Blocks with Screw-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.

Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.

	Terminal Blocks											Covers		End Stops		Bar Jumpers
										Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







				380V AC—22 amp per Circuit

				3	2	20 to 12	6	81	3	IP20	Gray	00000000	00000	00000	00000000	00000	0000000	00000	Noninsulated	00000000	00000




						600V AC—32 amp per Circuit

						1	6	22 to 12	6	87.5	1, 3	IP20	Black	00000000	00000	00000	———	0	———	0	—	———	0




								630V AC/630V DC—24 amp per Circuit

								2	2	22 to 12	5	65.5	1, 3	IP20	Beige	00000000	0000	0000	0000000	0000	00000000	0000	Insulated	00000000	00000


								2	2	22 to 12	5	65.5	1, 3	IP20	Blue	00000000	0000	0000	0000000	0000	00000000	0000	Insulated	00000000	00000
								2	2	22 to 12	5	65.5	1, 3	IP20	Gray	00000000	0000	0000	0000000	0000	00000000	0000	Insulated	00000000	00000




										800V AC—32 amp per Circuit

										2	2	22 to 12	6	65.5	1, 3	IP20	Beige , Black , Blue , Gray , Green , Orange , Red , White , Yellow	0000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	0000000	00000




												800V AC/800V DC—32 amp per Circuit

												1	3	22 to 10	6	51.5	1, 3	IP20	Gray	00000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	00000


												1	4	22 to 10	6	63.5	1, 3	IP20	Gray	00000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	00000




														800V AC—41 amp per Circuit

														2	2	18 to 8	8	88	1, 3	IP20	Gray	00000000	0000	0000	00000000	0000	0000000	0000	Noninsulated	0000000	00000




																1,000V AC—24 amp per Circuit

																1	2	22 to 12	5	44.5	1, 3	IP20	Beige , Black , Blue , Gray , Orange , Red , White , Yellow	00000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	00000000	0000




																		1,000V AC—32 amp per Circuit

1	2																	22 to 10	6	44.5	1, 3	IP20	Beige , Black , Blue , Gray , Green , Orange , Red , White , Yellow	0000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	0000000	0000




		1,000V AC—41 amp per Circuit

		1	2															22 to 8	8	44.5	1, 3	IP20	Beige , Black , Blue , Gray , Green , Orange , Red , White , Yellow	0000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	0000000	00000




				1,000V AC—57 amp per Circuit

				1	2													20 to 6	10	44.5	1, 3	IP20	Beige , Black , Blue , Gray , Red , White , Yellow	0000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	0000000	00000




																		1,000V AC—76 amp per Circuit

						1	2											18 to 6	12	45.5	1, 3	IP20	Black , Blue , Gray , Red , White , Yellow	00000000	0000	0000	00000000	0000	0000000	0000	Noninsulated	00000000	00000




																		1,000V AC—125 amp per Circuit

																		1	2	10 to 1/0	16	49	1, 3	IP20	Black , Blue , Gray , Red , White , Yellow	00000000	0000	0000	———	0	0000000	0000	Noninsulated	00000000	00000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	00000000	00000	00000


		1, 2	6	—	100	White	0000000	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	0000000	0000	0000


				1, 2	5	101 to 200	100	White	0000000	0000	0000
				1, 2	6	1 to 100	100	White	0000000	0000	0000
				1, 2	6	101 to 200	100	White	0000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	0000000	0000	0000


						1, 2	5	101 to 200	100	White	0000000	0000	0000
						1, 2	6	1 to 100	100	White	0000000	0000	0000
						1, 2	6	101 to 200	100	White	0000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Ground Terminal Blocks with Screw-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											End Stops
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each



	1	2	22 to 12	5	43.5	Green/Yellow	1, 3	IP20	00000000	00000	00000	0000000	00000


	1	2	22 to 12	6	43.8	Green/Yellow	1, 3	IP20	0000000	0000	0000	0000000	0000
	1	2	22 to 8	8	43.8	Green/Yellow	1, 3	IP20	0000000	0000	0000	0000000	0000
	1	2	20 to 6	10	43.8	Green/Yellow	1, 3	IP20	0000000	0000	0000	0000000	0000
	1	2	14 to 4	12	49.5	Green/Yellow	1, 3	IP20	00000000	0000	0000	0000000	0000
	1	2	8 to 1/0	16	49	Green/Yellow	1, 3	IP20	00000000	00000	0000	0000000	0000
	1	4	22 to 10	6	63.5	Green/Yellow	1, 3	IP20	00000000	0000	0000	0000000	0000
	1	7	22 to 12	6	90	Green/Yellow	1, 3	IP20	00000000	00000	00000	00000000	0000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	00000000	00000	00000


		1, 2	6	—	100	White	0000000	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	0000000	0000	0000


				1, 2	5	101 to 200	100	White	0000000	0000	0000
				1, 2	6	1 to 100	100	White	0000000	0000	0000
				1, 2	6	101 to 200	100	White	0000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	0000000	0000	0000


						1, 2	5	101 to 200	100	White	0000000	0000	0000
						1, 2	6	1 to 100	100	White	0000000	0000	0000
						1, 2	6	101 to 200	100	White	0000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Fuse Terminal Blocks with Screw-Clamp Terminals

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

Blown Fuse Indicator—A light goes on when the fuse blows, so you can spot an overloaded circuit without cutting power or touching equipment.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

	Terminal Blocks																	Covers		End Stops		Bar Jumpers
						For Fuse										Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Trade Size	Overall Dia.	Overall Lg.	Type	Circuit Status Indicator Type	Blown Fuse Indicator Voltage	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







				300V AC/300V DC—6.3 amp per Circuit

				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	—	—	3	IP20	Gray	00000000	000000	000000	00000000	00000	00000000	00000	Noninsulated	0000000	000000


				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V DC 60V DC 110V AC	3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Noninsulated	0000000	00000
				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Noninsulated	0000000	00000




						400V AC/400V DC—6.3 amp per Circuit

						1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Gray	00000000	00000	00000	0000000	0000	0000000	0000	—	———	0


						1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Gray	00000000	00000	00000	0000000	0000	0000000	0000	—	———	0




								600V AC—6.3 amp per Circuit

								2	2	24 to 12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	00000


								2	2	12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	00000




										630V AC—6.3 amp per Circuit

										1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	—	—	1, 3	IP20	Gray , Orange	0000000	0000	0000	0000000	0000	0000000	0000	—	———	0




												630V AC/630V DC—6.3 amp per Circuit

												2	2	24 to 12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	—	—	1, 3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	00000




														800V AC/800V DC—10 amp per Circuit

														1	2	22 to 10	13	85.1	3AG	1/4"	—	Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Black	00000000	00000	00000	0000000	0000	0000000	0000	—	———	0


														1	2	22 to 10	13	85.1	3AG	1/4"	—	Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Black	00000000	00000	00000	0000000	0000	0000000	0000	—	———	0




																800V AC—16 amp per Circuit

1																2	22 to 10	13	85.1	3AG	1/4"	—	Glass	—	—	1, 3	IP20	Black	0000000	00000	0000	0000000	0000	0000000	0000	—	———	0




		800V AC—30 amp per Circuit

		1	2													18 to 6	22	90.7	—	13/32"	1 1/2"	Cartridge	—	—	1, 3	IP20	Gray	00000000	00000	00000	———	0	0000000	0000	—	———	0

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Disconnect Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Screw-Clamp Terminals.

Test and troubleshoot circuits without removing any wire. Flip the tab by hand or with a screwdriver to open and close the circuit.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.

Terminal Blocks											Covers		End Stops		Adjacent Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each







			320V AC/320V DC—10 amp per Circuit

			1	2	12	5	44.5	Gray/Orange	1, 3	IP20	00000000	00000	00000	0000000	00000	0000000	00000	Noninsulated	00000000	00000




					400V AC—15 amp per Circuit

					1	2	22 to 10	8	47	Gray	1, 3	IP20	0000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	0000




							400V AC—20 amp per Circuit

							1	2	22 to 10	6	44.5	Gray	1, 3	IP20	0000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	0000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	00000000	00000	00000


		1, 2	6	—	100	White	0000000	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	0000000	0000	0000


				1, 2	5	101 to 200	100	White	0000000	0000	0000
				1, 2	6	1 to 100	100	White	0000000	0000	0000
				1, 2	6	101 to 200	100	White	0000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	0000000	0000	0000


						1, 2	5	101 to 200	100	White	0000000	0000	0000
						1, 2	6	1 to 100	100	White	0000000	0000	0000
						1, 2	6	101 to 200	100	White	0000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals.

Plug voltage meters into the built-in sockets to confirm the voltage is right for your application. You can also test and troubleshoot circuits without removing any wire. Push, turn, and release the knob to break your connection. When the knob is released, stick a wire through the hole so you can't accidentally reconnect the circuit—similar to a lockout tag.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops		Adjacent Jumpers			Test Plugs
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each		Each







			500V AC/500V DC—15 amp per Circuit

			1	2	22 to 8	8	55.5	Gray/Black	1, 3	IP10	00000000	00000	00000	00000000	00000	0000000	00000	Insulated	00000000	00000	00000000	00000


			1	2	22 to 8	8	55.5	Gray/Red	1, 3	IP10	00000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	0000	00000000	0000
			1	2	22 to 8	8	55.5	Gray/Yellow	1, 3	IP10	00000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	0000	00000000	0000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Thermocouple Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Thermocouple Terminal Blocks with Screw-Clamp Terminals.

Run your thermocouple wire into these blocks so no signal is lost or destroyed. The metal in the terminals is compatible with multiple thermocouple wire types.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks												Covers		End Stops
										Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For Thermocouple Wire Type	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each







			500V AC/500V DC

			1	2	24 to 2	6	44.5	J, K, T	Gray	1, 3	IP20	00000000	000000	000000	0000000	00000	0000000	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	6	—	100	White	0000000	00000	00000


		Numbered for Horizontal Rails



				1, 2	6	1 to 100	100	White	0000000	0000	0000


				1, 2	6	101 to 200	100	White	0000000	0000	0000


				Numbered for Vertical Rails



						1, 2	6	1 to 100	100	White	0000000	0000	0000


						1, 2	6	101 to 200	100	White	0000000	0000	0000

Quick-Connect Modular DIN-Rail Mount Terminal Blocks

Pop wire in and out of these terminal blocks without adjusting a screw. Lift the clamp with a screwdriver or built-in lever, then release the clamp down onto the wire. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.

Terminal Blocks with Spring-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Alternate Jumpers—Connect terminals on two blocks of the same width, skipping a block in between. This reduces wire clutter and gives you flexibility to adjust your set-up in the future.

	Terminal Blocks										Covers		End Stops		Adjacent Jumpers			Alternate Jumpers
									Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each	Insulation		Each







				300V AC/300V DC—15 amp per Circuit

				2	2	28 to 12	5	64	3	Blue , Gray	00000000	00000	00000	00000000	00000	00000000	00000	Insulated	00000000	00000	Insulated	00000000	00000


				3	2	28 to 12	5	103	3	Blue , Gray	00000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000




						600V AC/600V DC—15 amp per Circuit

						1	2	22 to 14	4.2	48.5	3	Black , Blue , Gray , Orange , Red , Yellow	00000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000


						1	3	22 to 14	4.2	59.5	3	Black , Blue , Gray , Orange , Red , Yellow	00000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000
						1	4	22 to 14	4.2	70	3	Black , Blue , Gray , Orange , Red , Yellow	00000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000




								600V AC/600V DC—20 amp per Circuit

								1	2	28 to 12	5	53	3	Black , Blue , Gray , Orange , Red , Yellow	000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000


								1	2	28 to 12	6	59	3	Black , Blue , Gray , Orange , Red , Yellow	0000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000
								1	3	28 to 12	5	64	3	Black , Blue , Gray , Orange , Red , Yellow	000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000
								1	3	28 to 12	6	73.5	3	Black , Blue , Gray , Orange , Red , Yellow	0000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000
								1	4	28 to 12	5	75	3	Black , Blue , Gray , Orange , Red , Yellow	0000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000
								1	4	28 to 12	6	86	3	Black , Blue , Gray , Orange , Red , Yellow	0000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000
								2	2	28 to 12	6	73.5	3	Blue , Gray	00000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000




										600V AC/600V DC—30 amp per Circuit

										1	2	24 to 10	8	74.5	3	Blue , Gray , Orange	0000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000


										1	3	24 to 10	8	93	3	Blue , Gray , Orange	0000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000




												600V AC/600V DC—50 amp per Circuit

												1	2	24 to 8	10	78	3	Blue , Gray , Orange	0000000	0000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000


												1	3	24 to 8	10	97.5	3	Blue , Gray , Orange	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000




														600V AC/600V DC—65 amp per Circuit

1	2													24 to 6	12	94.5	3	Blue , Gray , Orange	0000000	00000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000


1	3													24 to 6	12	104.5	3	Blue , Gray , Orange	0000000	00000	00000	00000000	0000	00000000	0000	—	———	0	Insulated	00000000	0000




		600V AC/600V DC—115 amp per Circuit

		1	2											8 to 2	16	100	3	Blue , Gray	0000000	00000	00000	———	0	00000000	0000	Insulated	00000000	0000	—	———	0




				600V AC/600V DC—200 amp per Circuit

				1	2									4 to 4/0	25	107	3	Blue , Gray	0000000	00000	00000	———	0	00000000	0000	Insulated	00000000	00000	—	———	0

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For Terminal Block Wd., mm	Number Range	Includes	Markers per Card	Color		1-24	25-Up
Blank



		4.2	—	—	100	White	00000000	00000	00000


		5, 6, 8, 10, 12, 16, 25	—	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				4.2	1 to 50	Two of Each Number	100	White	00000000	00000	0000


				5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	00000000	00000	0000


				Numbered for Vertical Rails



						4.2	1 to 50	Two of Each Number	100	White	00000000	00000	00000


						5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	00000000	00000	00000

Terminal Blocks with Lever- and Spring-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks									Covers		End Stops		Adjacent Jumpers
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each







			600V AC/600V DC—5 amp per Circuit

			1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 8	7.5	74.8	Blue	3	0000000	00000	00000000	00000	00000000	00000	Insulated	00000000	00000


			1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 8	7.5	74.8	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
			1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 8	7.5	90.8	Blue	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
			1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 8	7.5	90.8	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000




					600V AC/600V DC—20 amp per Circuit

					1	1 (Lever Clamp) 1 (Spring Clamp)	22 to 12	5.2	61.5	Blue	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000


					1	1 (Lever Clamp) 1 (Spring Clamp)	22 to 12	5.2	61.5	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
					1	1 (Lever Clamp) 2 (Spring Clamp)	22 to 12	5.2	72.2	Blue	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
					1	1 (Lever Clamp) 2 (Spring Clamp)	22 to 12	5.2	72.2	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000




							600V AC/600V DC—30 amp per Circuit

							1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 10	6.2	70	Blue	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000


							1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 10	6.2	70	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
							1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 10	6.2	83.2	Blue	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
							1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 10	6.2	83.2	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000




									600V AC/600V DC—65 amp per Circuit

									1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	10	89	Blue	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000


									1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	10	89	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
									1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	10	110.4	Blue	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
									1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	10	110.4	Gray	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000




											600V AC/600V DC—85 amp per Circuit

											1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	12	91.5	Blue	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000


											1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	12	91.5	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
											1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	12	113.5	Blue	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
											1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	12	113.5	Gray	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000

Markers

	For Terminal Block Wd., mm	Markers per Card	Color
Blank


5.2, 6.2, 7.5, 10, 12	100	White	00000000	00000

Ground Terminal Blocks with Spring-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks										Covers		End Stops		Adjacent Jumpers
								Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		1-24	25-Up		Each		Each	Insulation		Each



	1	2	28 to 12	5	53	Green/Yellow	3	0000000	000000	000000	00000000	00000	00000000	00000	Insulated	00000000	00000


	1	2	28 to 12	6	59	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	2	24 to 10	8	74.5	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	2	24 to 8	10	78	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	2	24 to 6	12	94.5	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	2	22 to 14	4.2	50.8	Green/Yellow	3	00000000	0000	0000	00000000	0000	00000000	0000	—	———	0
	1	2	8 to 2	16	100	Green/Yellow	3	0000000	00000	00000	———	0	00000000	0000	—	———	0
	1	2	4 to 4/0	25	107	Green/Yellow	3	00000000	00000	00000	———	0	00000000	0000	—	———	0
	1	3	28 to 12	5	64	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	3	28 to 12	6	73.5	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	3	24 to 10	8	93	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000


	1	3	24 to 8	10	97.5	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	3	24 to 6	12	104.5	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	3	22 to 14	4.2	59.5	Green/Yellow	3	00000000	0000	0000	00000000	0000	00000000	0000	—	———	0
	1	4	28 to 12	5	64	Green/Yellow	3	00000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	4	28 to 12	5	75	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	4	28 to 12	6	86	Green/Yellow	3	0000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	4	22 to 14	4.2	70	Green/Yellow	3	00000000	0000	0000	00000000	0000	00000000	0000	—	———	0

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For Terminal Block Wd., mm	Number Range	Includes	Markers per Card	Color		1-24	25-Up
Blank



		4.2	—	—	100	White	00000000	00000	00000


		5, 6, 8, 10, 12, 16, 25	—	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				4.2	1 to 50	Two of Each Number	100	White	00000000	00000	0000


				5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	00000000	00000	0000


				Numbered for Vertical Rails



						4.2	1 to 50	Two of Each Number	100	White	00000000	00000	00000


						5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	00000000	00000	00000

Ground Terminal Blocks with Lever- and Spring-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks									Covers		End Stops		Adjacent Jumpers
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each



	1	1 (Lever Clamp) 1 (Spring Clamp)	22 to 12	5.2	63.8	Green/Yellow	3	0000000	00000	00000000	00000	00000000	00000	Insulated	00000000	00000


	1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 10	6.2	70.7	Green/Yellow	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 8	7.5	75.2	Green/Yellow	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	10	89	Green/Yellow	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	1 (Lever Clamp) 1 (Spring Clamp)	20 to 6	12	91.5	Green/Yellow	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	22 to 12	5.2	72.2	Green/Yellow	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 10	6.2	83.2	Green/Yellow	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 8	7.5	91.2	Green/Yellow	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	10	110.4	Green/Yellow	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	1 (Lever Clamp) 2 (Spring Clamp)	20 to 6	12	113.5	Green/Yellow	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000

Markers

	For Terminal Block Wd., mm	Markers per Card	Color
Blank


5.2, 6.2, 7.5, 10, 12	100	White	00000000	00000

Fuse Terminal Blocks with Spring-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Quick-Connect Modular DIN-Rail Mount Terminal Blocks, Fuse Terminal Blocks with Spring-Clamp Terminals.

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

Blown Fuse Indicator—A light goes on when the fuse blows, so you can spot an overloaded circuit without cutting power or touching equipment.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks															Covers		End Stops		Adjacent Jumpers
					For Fuse								Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Trade Size	Overall Dia.	Overall Lg., mm	Type	Circuit Status Indicator Type	Color	For DIN Rail Trade Size		1-24	25-Up		Each		Each	Insulation		Each







			24V AC/24V DC—30 amp per Circuit

			1	2	24 to 10	8	85	—	—	—	Automotive	Blown Fuse	Gray	3	0000000	000000	000000	000000	00000	00000000	00000	Insulated	00000000	00000




					110V AC/110V DC—10 amp per Circuit

					1	2	28 to 12	8	60	—	5 mm	20	Ceramic, Glass	Blown Fuse	Gray	3	0000000	00000	00000	000000	0000	00000000	0000	Insulated	00000000	0000


					1	2	28 to 12	10	60	3AG	1/4"	—	Glass	Blown Fuse	Gray	3	0000000	00000	00000	000000	0000	00000000	0000	Insulated	00000000	0000




							600V AC/600V DC—10 amp per Circuit

							1	2	28 to 12	8	60	—	5 mm	20	Ceramic, Glass	—	Gray	3	000000	00000	00000	000000	0000	00000000	0000	Insulated	00000000	0000


							1	2	28 to 12	10	60	3AG	1/4"	—	Glass	—	Gray	3	000000	00000	00000	000000	0000	00000000	0000	Insulated	00000000	0000




									600V AC/600V DC—30 amp per Circuit

									1	2	24 to 10	8	85	—	—	—	Automotive	—	Gray	3	000000	00000	00000	000000	0000	00000000	0000	Insulated	00000000	0000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For Terminal Block Wd., mm	Number Range	Includes	Markers per Card	Color		1-24	25-Up
Blank



		5, 6, 8, 10, 12, 16, 25	—	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	00000000	00000	0000


				Numbered for Vertical Rails



						5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	00000000	00000	00000

Disconnect Terminal Blocks with Spring-Clamp Terminals

Test and troubleshoot circuits without removing any wire. Flip the tab by hand or with a screwdriver to open and close the circuit.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Alternate Jumpers—Connect terminals on two blocks of the same width, skipping a block in between. This reduces wire clutter and gives you flexibility to adjust your set-up in the future.

Terminal Blocks										Covers		End Stops		Adjacent Jumpers			Alternate Jumpers
								Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		1-24	25-Up		Each		Each	Insulation		Each	Insulation		Each







			600V AC/600V DC—15 amp per Circuit

			1	2	28 to 12	5	69.5	Gray	3	00000000	000000	00000	00000000	00000	00000000	00000	Insulated	00000000	00000	Insulated	00000000	00000




					600V AC/600V DC—30 amp per Circuit

					1	2	24 to 10	8	85	Gray	3	00000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000	Insulated	00000000	0000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For Terminal Block Wd., mm	Number Range	Includes	Markers per Card	Color		1-24	25-Up
Blank



		5, 6, 8, 10, 12, 16, 25	—	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	00000000	00000	0000


				Numbered for Vertical Rails



						5, 6, 8, 10, 12, 16, 25	1 to 50	Two of Each Number	100	White	00000000	00000	00000

Sensor Terminal Blocks with Spring-Clamp Terminals

These blocks connect sensors and actuators with NPN and PNP outputs. An LED indicates whether the circuits are powered, making it easier to troubleshoot your system. Mix and match blocks to consolidate wiring for multiple sensors, such as light and photoelectric sensors on a conveyor line. Other terminals on the blocks connect PLCs, data loggers, and other components.

For NPN Signal Output—These blocks light up when a connected NPN sensor sends a negative signal. They're common in Asian automation systems.

For PNP Signal Output—These blocks light up when a connected PNP sensor sends a positive signal. They're common in North American and European automation systems.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

	Terminal Blocks										Covers		End Stops		Adjacent Jumpers
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Circuit Status Indicator Type	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each
For NPN Signal Output







				24V AC/24V DC—10 amp per Circuit

				4	2	24 to 16	7	81.1	Power	Gray	3	0000000	000000	00000000	00000	00000000	00000	Insulated	00000000	00000


				For PNP Signal Output







								24V AC/24V DC—10 amp per Circuit

								4	2	24 to 16	7	81.1	Power	Gray	3	0000000	00000	00000000	0000	00000000	0000	Insulated	00000000	0000

Accessories for Terminal Blocks

Ring Terminals

Secure wire to screw connections without worrying it will pop off. A go-to for terminal blocks, batteries, and circuit breaker panels, ring terminals encircle the whole screw shank, so they stay put better than spade and hook terminals when vibrated or pulled. They take a bit longer to install, however, because you have to completely remove the screw. Attach your wire with a crimping tool to avoid a damaged barrel and loose connection.

Vinyl Plastic Insulation—Our basic insulation, vinyl prevents the wire from short circuiting and won’t break down from dirt, grime, and occasional twists and tugs.

Nylon Insulation—In addition to preventing short circuits, this wear-resistant insulation protects wire from vibration and rubbing against nearby edges.

Noninsulated—The basic, economical option when short circuits from nearby wiring aren't a concern.

Brass Internal Sleeve—Metal internal sleeves add holding strength and strain relief to keep the wire secure when bent, pulled, or vibrated.

			Ring, mm
	For Wire Ga.	For Screw Size	Wd.	Thk.	Insulation Color	Terminal Material	Max. Temp., ° F	Max. Voltage	Certification	Pkg. Qty.		Pkg.
Straight





		Insulated

				Vinyl Plastic Insulation

				22 to 18	M3	5.80	0.7	Red	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	10	0000000	000000


				22 to 18	M5	8.90	0.7	Red	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	10	0000000	00000
				16 to 14	M3	5.90	20.5	Blue	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	10	0000000	00000
				16 to 14	M5	8.90	20.5	Blue	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	10	0000000	00000
				12 to 10	M5	9.50	1	Yellow	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	10	0000000	00000


				Insulated

						Nylon Insulation with Brass Internal Sleeve

						22 to 18	M3	5.90	0.7	Red	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	5	0000000	0000


						22 to 18	M5	8.90	0.7	Red	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	5	0000000	0000
						16 to 14	M3	5.90	0.7	Blue	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	5	0000000	0000
						16 to 14	M5	8.90	0.7	Blue	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	5	0000000	0000
						12 to 10	M3	6.00	1	Yellow	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	5	0000000	00000
						12 to 10	M5	9.50	1	Yellow	Tin-Plated Copper	220	600V AC 600V DC	CSA Certified, UL Listed	5	0000000	00000


						Noninsulated

								Noninsulated

								22 to 18	M3	6.50	0.71	—	Tin-Plated Copper	300	Not Rated	UL Listed	10	0000000	0000


								22 to 18	M5	11.90	0.71	—	Tin-Plated Copper	300	Not Rated	UL Listed	10	0000000	0000
								16 to 14	M3	6.40	0.79	—	Tin-Plated Copper	300	Not Rated	UL Listed	10	0000000	0000
								16 to 14	M5	8.70	0.79	—	Tin-Plated Copper	300	Not Rated	UL Listed	10	0000000	0000
								12 to 10	M5	9.50	1.02	—	Tin-Plated Copper	300	Not Rated	UL Listed	10	0000000	0000

Space-Saving Modular DIN-Rail Mount Terminal Blocks

These handle the same voltage and power as our other modular blocks while taking up about half the vertical space. Snap them onto DIN 2 rail (also known as mini rail), which is lower in height than DIN 3 rail.

The screw-clamp or spring-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

Mix and match blocks to get the exact number of circuits you need in a single setup. Add terminal blocks for fuses and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Screw-Clamp Terminals.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Noninsulated—Terminal blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.

Terminal Blocks											Covers		End Stops		Bar Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







			250V AC—20 amp per Circuit

			1	2	28 to 12	5	27.5	2	IP20	Gray	0000000	00000	00000	0000000	00000	0000000	00000	Noninsulated	0000000	000000




					500V AC—17.5 amp per Circuit

					1	2	24 to 16	4	28	2	IP20	Gray	00000000	0000	0000	00000000	0000	0000000	0000	Noninsulated	00000000	00000




							500V AC—30 amp per Circuit

							1	2	22 to 12	6	28	2	IP20	Blue , Gray	0000000	0000	0000	00000000	0000	0000000	0000	Noninsulated	0000000	00000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	4	—	100	White	00000000	00000	00000


		1	5	—	100	White	00000000	0000	0000
		1	6	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1	4	1 to 100	100	White	00000000	0000	0000


				1	5	1 to 100	100	White	00000000	0000	0000
				1	5	101 to 200	100	White	00000000	0000	0000
				1	6	1 to 100	100	White	00000000	0000	0000
				1	6	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1	4	1 to 100	100	White	00000000	0000	0000


						1	4	101 to 200	100	White	00000000	0000	0000
						1	5	1 to 100	100	White	00000000	0000	0000
						1	5	101 to 200	100	White	00000000	0000	0000
						1	6	1 to 100	100	White	00000000	0000	0000
						1	6	101 to 200	100	White	00000000	0000	0000

Terminal Blocks with Spring-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Spring-Clamp Terminals.

Instead of fussing with screws, flip the lever to clamp your wire into the terminal.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops		Bar Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each







			600V AC/600V DC—24 amp per Circuit

			1	2	26 to 12	5	33	Gray	2	IP20	00000000	00000	00000	0000000	00000	0000000	00000	Insulated	0000000	000000


			1	4	26 to 12	10	33	Gray	2	IP20	00000000	0000	0000	0000000	0000	0000000	0000	Insulated	0000000	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	5	—	100	White	00000000	00000	00000


		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1	5	1 to 100	100	White	00000000	0000	0000


				1	5	101 to 200	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1	5	1 to 100	100	White	00000000	0000	0000


						1	5	101 to 200	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Ground Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Ground Terminal Blocks with Screw-Clamp Terminals.

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each



	1	2	22 to 12	6	28	Green/Yellow	2	IP20	0000000	00000	00000	00000000	00000	0000000	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	6	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				1	6	1 to 100	100	White	00000000	0000	0000


				1	6	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1	6	1 to 100	100	White	00000000	0000	0000


						1	6	101 to 200	100	White	00000000	0000	0000

Fuse Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Fuse Terminal Blocks with Screw-Clamp Terminals.

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks														Covers		End Stops
					For Fuse							Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Overall Dia., mm	Overall Lg., mm	Type	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each







			630V AC—6.3 amp per Circuit

			1	2	18 to 12	8	59.5	5	20	Ceramic, Glass	Gray	2	IP20	0000000	00000	00000	0000000	00000	0000000	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Modular Distribution Bars

Build your own distribution system for neutral and grounding applications by adding terminal blocks to these bars. Slide blocks onto the bar, also known as a bus bar, and then attach mounting brackets to the bar. All wires make contact with the bar, distributing the current among the terminal blocks.

Bars

Lg., m	Wd., mm	Ht., mm		Each
1	6	6	0000000	000000
1	10	3	0000000	00000

Brackets


Surface Mount	DIN-Rail Mount

		Mounting Holes
	Mounting Fasteners Included	Dia.	No. of	Pkg. Qty.		Pkg.
Surface Mount	No	0.16"	1	5	0000000	00000
DIN-Rail Mount for DIN 3 Rails	—	—	—	5	0000000	00000

Terminal Blocks

Terminal blocks have screw-clamp terminals that secure the wire as well as the block to the bar. Blocks are UL recognized for grounding applications.

Terminal Blocks										Terminal Block Markers
No. of Circuits	For Wire Ga.	Wire Connection	Wd., mm	Lg., mm	Ht., mm	Certification	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
1	22, 20, 18, 16, 14, 12, 10	Screw-Clamp Terminal	7.5	30	23.3	UL Recognized Component	5	0000000	00000	100	0000000	00000
1	10, 8, 6, 4	Screw-Clamp Terminal	9.8	36	23.3	UL Recognized Component	5	0000000	0000	100	0000000	0000
1	8, 6, 4, 2	Screw-Clamp Terminal	14.5	45	27.3	UL Recognized Component	5	0000000	0000	100	0000000	0000

Quick-Connect Plug-and-Socket Modular DIN-Rail Mount Terminal Blocks

Cut power with the pull of a plug when you need to swap out equipment or adjust your circuit. One of the openings on these blocks is a socket, so you can wire a plug outside the enclosure and then attach it to the socket that’s already in place.

The other connections are spring clamps, so you can pop wire in and out of these terminal blocks without adjusting a screw. Lift the clamp with a screwdriver, then release the clamp down onto the wire. Once clamped in place, the wire will stay put when vibrated, bent, or pulled.

Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

Sockets with Spring-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks									Covers		End Stops		Adjacent Jumpers
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each







			300V AC/300V DC—10 amp per Circuit

			1	1	24 to 16	3.5	48.5	Blue	3	0000000	00000	00000000	00000	00000000	00000	Insulated	00000000	00000


			1	1	24 to 16	3.5	48.5	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
			1	1	24 to 16	3.5	58.2	Blue	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
			1	1	24 to 16	3.5	58.2	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
			1	1	24 to 16	3.5	85.25	Blue	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
			1	1	24 to 16	3.5	85.25	Gray	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000

Markers

Ground Sockets with Spring-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks									Covers		End Stops		Adjacent Jumpers
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size		Each		Each		Each	Insulation		Each



	1	1	24 to 16	3.5	50.8	Green/Yellow	3	0000000	00000	00000000	00000	00000000	00000	Insulated	00000000	00000


	1	1	24 to 16	3.5	61.8	Green/Yellow	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000
	1	1	24 to 16	3.5	85.25	Green/Yellow	3	0000000	0000	00000000	0000	00000000	0000	Insulated	00000000	0000

Markers

Plugs with Spring-Clamp Terminals

Wd., mm	Ht., mm	Color		Each







300V AC/300V DC—10 amp per Circuit

1	1	24 to 16	3.5	40.5	Gray	00000000	00000


2	2	24 to 16	7.7	48.9	Gray	00000000	00000

Grounding Snap-In Nuts

Pave a safe path for electricity—these snap-in nuts dig into the mounting surface and cut through coatings to touch the metal below for a proper ground. They’re often used to mount servers and other equipment into electronics racks. All meet EIA-310 (Electronic Industries Alliance) specifications for use in standard 19" electronics racks. Simply snap these nuts, also known as cage nuts, into square holes.

These snap-in nuts have a flexible nylon casing, so you can install them with a pinch. Unlike rigid snap-in nuts, you can squeeze them into a hole from either side. As you fasten a bolt, the nut in the casing is pulled up, pushing its teeth into the mounting surface.

Rectangular with Floating Nut

	For Panel Thk., mm	Square Hole Size	Wd.	Head Ht.	Case Material	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	1 to 4	0.362" to 0.375"	0.5"	0.45"	Plastic	EIA-310	10	000000000	000000