Confirm your durometer hardness tester is taking accurate readings. Use your tester on these blocks to make sure the durometer readings match the block. The blocks come with a calibration certificate traceable to NIST to ensure their accuracy.

Use these inspection V-blocks to support rods, shafts, and other cylindrical workpieces for precise inspection or measuring tasks. The round surfaces reduce pressure on your workpiece, which helps prevent damage.

Test the hardness of thin and irregularly shaped plastic, rubber, and laminate parts, such as O-rings. These testers can be used on products where the surface area is too small for accurate durometer readings with a standard Shore A tester, such as the rounded surface of O-rings. They include O-ring fixtures that hold five standard-sized O-rings in place during testing. These testers are also capable of measuring materials as thin as 0.05″, about the thickness of a credit card. On the display, they’ll show the highest reading until they’re reset. They include a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.

Use the included test blocks to practice taking accurate measurements at the right pressure against your workpiece. Send your measurement data directly to your PC using the USB port.

Check your hardness tester for accuracy against a block with a known hardness rating. Each block is tested according to ASTM E10, which checks the hardness at five locations along the block. They include a certificate that lists the block’s actual hardness, as well as each of the five measurements taken during the test. Blocks also include a NIST-traceable certificate that states they’ve passed a test for accuracy.

Each block is marked with their Brinell hardness rating and a serial number.

Determine the hardness of very hard steel. To use, slide a test bar into the tester, place the tester on your surface, and hit with a hammer; a steel ball will make an impression. Measure the impression with the 20X microscope and use the computing disc to determine hardness.

Calibrate your colorimeter so it can identify colors with precision. The white block calibrates your colorimeter because the machine measures all other colors according to their variance from true white. The four colored blocks are particularly helpful in quality control applications, where you want to make sure a specific color is consistent unit-to-unit. Made of ceramic, these plates won’t degrade, warp, or discolor over time, ensuring reliable measurements. Their surfaces are smooth and easy to clean, so they resist scratches that could affect readings. These plates are precisely manufactured to ISO/IEC 17025 standards for testing and calibration equipment.

Machined in pairs, these blocks are precision ground to tolerances thinner than a sheet of paper to give you the flattest and squarest surface for positioning workpieces. Since they are perfectly aligned to one another, they’ll keep your workpieces level and parallel. Also known as 1-2-3 blocks, they're typically used to elevate, support, and align parts for measuring and inspecting. They're made from granite, so they won’t scratch the surface of your workpiece. They also won’t warp when temperatures fluctuate. Unlike metal blocks, these granite blocks are nonmagnetic, so they won’t interfere with sensitive electronic equipment. They come with a certificate of accuracy that's traceable to NIST.

Made in pairs, these inspection V-blocks are precision ground to tight tolerances for straight sides, square corners, and centered grooves. Since their top surfaces are perfectly matched, they keep the centerline of your workpiece level and parallel. These blocks are often used to precisely align round workpieces for measuring or inspecting. They come with a certificate traceable to NIST confirming their accuracy. Unlike metal blocks, these black granite blocks don’t rust or warp from temperature changes. They’re also nonmagnetic, so they won’t interfere with sensitive electronic equipment.