Tool Lanyards
![](/prerenderstable/mvPRE/contents/gfx/imagecache/100/1009n11p1-i01b-digital@halfx_637068330969214583.png?ver=imagenotfound)
Elastic Loop (Wrench Not Included)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/100/1009n31p2-i01b-digital@halfx_637068291398310939.png?ver=imagenotfound)
Detachable Elastic Loop
![](/prerenderstable/mvPRE/contents/gfx/imagecache/100/1009n21-@halfx_637605700744108725.png?ver=imagenotfound)
Carabiner for One Tool
![](/prerenderstable/mvPRE/contents/gfx/imagecache/100/1009n71p1-i01b-digital@halfx_637068295198794536.png?ver=imagenotfound)
Carabiners for Two Tools
Keep your equipment close and prevent accidental drops.
For No. of Tools | Connection Type | Capacity, lbs. | Lg. | Material | Construction | For Min. Tool Opening | Carabiner Material | Each | |
1 | Carabiner × Elastic Loop | 10 | 35" | Nylon | Webbing | 3/8" | Aluminum | 0000000 | 000000 |
1 | Carabiner × Detachable Elastic Loop | 5 | 38" | Nylon | Webbing | 3/8" | Aluminum | 0000000 | 00000 |
1 | Carabiner × Carabiner | 10 | 35" | Nylon | Webbing | 1/4" | Aluminum | 0000000 | 00000 |
2 | Carabiner × Carabiner × Carabiner | 15 | 35" | Nylon | Webbing | 1/4" | Stainless Steel | 0000000 | 00000 |
Replacement Detachable Elastic Loop | 0000000 | Each | 00000 |
Tool-Holding Rings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/123/1239n11p2-@halfx_637220424641668874.png?ver=imagenotfound)
Ring Shown with Tool Lanyard (not included)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/123/1239n12p1-@halfx_637220126583730057.png?ver=imagenotfound)
Add attachment points to your tools. Slide the ring on and secure it in place with included rubber collar. It rotates so you can turn your tool freely. Use with Tool Lanyards (not included).
Tool-Holding Heat-Shrink Attachments
![](/prerenderstable/mvPRE/contents/gfx/imagecache/516/5166a11p2-i01b-digital@halfx_637087117874122977.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/516/5166a11c1-i01b-digital-master1573135683-p9@halfx_637087118639566990.png?ver=imagenotfound)
Also known as tether loops, these have a heat-shrink sleeve for gripping your tool and a D-ring for attaching to a tool lanyard (not included). Slip the sleeve over your tool and apply heat with a heat gun until the sleeve grips tightly. To ensure the loop won’t slip off, the ends of the tool must be wider than where the loop will rest.
For Tool Dia. | ID Before Shrinking | Sleeve Lg. | Ring Inside Wd. | Ring Inside Lg. | Capacity | Each | |
0.25"-0.5" | 0.75" | 1 3/4" | 0.56" | 0.47" | 4 lbs. | 0000000 | 00000 |
0.36"-0.75" | 1.1" | 1 3/4" | 0.56" | 0.47" | 5 lbs. | 0000000 | 0000 |
0.55"-1.25" | 1.5" | 2" | 1.02" | 0.86" | 10 lbs. | 0000000 | 0000 |
0.75"-1.75" | 2" | 2" | 1.02" | 0.86" | 15 lbs. | 0000000 | 0000 |
0.75"-1.75" | 2" | 4" | 1.56" | 1.05" | 25 lbs. | 0000000 | 00000 |
1.5"-2.5" | 2.75" | 2" | 1.56" | 1.05" | 20 lbs. | 0000000 | 00000 |