These durable sheets resist compression and are often used in oven and power-generating applications.

Made of high-strength calcium silicate, these durable sheets withstand high temperatures and are often used in power-generating applications.

Thinner than most rigid insulation for furnaces and other high-heat applications, these millboard sheets are also used for gasket fabrication.

Often used in high-humidity applications for its low moisture absorption, this flexible paper insulation is made of inorganic materials. It’s typically used in appliances and electrical devices.

Commonly used in furnaces and engine compartments, these flexible silica fiber sheets resist corrosive acids.

Typically used in ovens and furnaces, these are the most efficient of our rigid high-temperature insulation sheets. Please note that they require special care when installing since the crumbly material is difficult to work with and will crack easily. Sheets lose strength over time and are intended to be installed behind another facing or insulation material.

Designed for fluctuating, high-temperature applications, these semi-rigid sheets are typically used in furnaces and fire protection applications. They experience very little shrinkage at high temperatures, but the brittle material can be somewhat difficult to work with.

The fiberglass facing on these flexible silicone foam sheets protects against highly abrasive conditions and resists tearing.

Lay, coat, and bond firebricks. Apply this mortar with a trowel.

Stronger than standard firebricks but with lower insulation capabilities, these withstand heavy abrasion on the floors and sides of furnaces. Also known as hard firebricks.

Shield against extreme heat with these flexible ceramic strips. They are often used to insulate hose, cables, and process piping.

Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications

Hook-and-loop fasteners make it easy to install, remove, and reuse this flexible insulation. Use on steam, hot water, and process pipes and fittings.

Superior in strength and durability, these thin strips insulate as well as protect personnel from accidental contact with hot pipes. Use for exhaust, hot water, and process pipes.

Reduce the risk of burns from accidental contact with hot pipes under your sink. These molded, flexible pipe covers are ADA compliant when properly installed.

Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems.

Rigid and flame resistant, these insulation tubes are typically used in process piping and mechanical systems.

Able to withstand temperatures as low as -290° F, these super-thin, lightweight sheets are made of fiber-reinforced silica aerogel that can flex into tight spaces other insulation can't. Use in process piping and power-generating applications.

Protect insulation from light impact and moisture with this durable PVC jacketing.

Wrap pipes, tubing, and fittings to prevent condensation from forming. These strips are for use on copper, iron, and steel.

Prevent condensation from forming on refrigeration and air conditioning lines and cold‐water piping.

Seal and insulate cracks, gaps, and other hollow spaces with this insulation.

Expanding quickly to fill large voids, this foam insulation begins to harden in 4 minutes and can be cut within 10 minutes.

Often used around electrical outlets and plumbing openings, this foam insulation helps prevent flames and smoke from spreading between walls and floors.

Attach these hanger studs to a flat surface, then press your insulation sheets onto the spikes and secure with a washer.

Form this putty around metal pipes and tubing or spread on a flat metal surface to stop heat from traveling to adjoining surfaces when soldering, welding, and brazing.

Use these sheets in operating temperatures below 32° F, such as cold-storage applications.

Wrap rectangular and round ductwork with this flexible insulation.

Also known as fire wrap, these flame-resistant sheets meet ASTM E84 0/0 for flame and smoke and create a fire barrier around rectangular and round ductwork. They are often used to wrap kitchen grease exhaust ducts and air ducts.

Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.

This tape discharges minor amounts of surface static electricity and resists static buildup.

Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

In addition to handling temperatures up to 500° F, this fiberglass tape is tough enough for abrasive applications such as sand blasting.