To prevent wear and corrosion, an armored stainless steel cable protects the wiring that connects these probes to your temperature-monitoring device. The probes themselves are also made of stainless steel, so you don't have to worry about corrosion when you're measuring the temperature of liquids and gases.

An economical alternative to insulated thermocouple probes, these probes measure the temperature of liquids and gases.

Send temperature readings to two separate devices—these probes, also known as duplex thermocouples, have two thermocouples inside.

Safe to use while measuring temperatures near flammable gases or combustible dust, these probes have an explosionproof head that’s FM approved.

To prevent damage from vibration, impact, and shock, these probes come with a thermowell. It acts as a shield, allowing the probe to measure the temperature of liquids and gases without touching them.

Quick to install and remove, these probes won’t shake loose from a surface even in high-vibration environments.

Simply peel off the adhesive backing on these probes and press them onto a surface to measure its temperature. Without bulky mounting hardware, the thin sensor can slide into crammed spots.

Wrap these probes around pipe, hose, or other tubular shapes to measure surface temperature.

Measure temperatures around your facility by sticking these probes onto magnetic surfaces.

Thick wire with ceramic insulation stands up to extreme temperatures in forging, die casting, and heat treating.

To shield the wiring from corrosion and wear in harsh environments, these probes have an armored stainless steel cable. Use their narrow tip to pierce pliable plastic, rubber, and other soft solids to check the internal temperature.

With a clip on the end, these probes are quick to install and easy to remove. They're often used on vents, circuit boards, and other irregular surfaces.

As the probe on these transmitters measures temperature, the included thermowell shields it from vibration, impacts, and shock. These transmitters convert readings to analog signals and send them to remote displays, programmable logic controllers (PLCs), and other devices.

Convert round-pin thermocouple connectors to flat-pin mini thermocouple connectors.

Create a connection point on a control panel to plug in thermocouples.

Thread these connectors into a hole for an easy way to plug in a thermocouple.

Extend the reach of your thermocouple probe—plug-in connectors on both ends of this wire speed up installation.