Thread-Cutting Nuts | McMaster-Carr

Filter by

System of Measurement

Thread Size

For Use On

Thread Direction

Material

Thread Type

Thread Pitch

Sold As

Finish

Titanium Nitride (TiN) Coated

Flange Diameter

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

REACH

Pipe Size

Die Sizes Included

Nut Type

For Threading

Hex Width

Height

Threads per Inch

Number of Pieces

Number of Dies

Forward

How can we improve?

486 Products

Flanged Push Nuts for Unthreaded Shafts

The wide flange provides better load distribution than standard push nuts and can be used to cover oversized holes. Also known as thread cutting nuts. Use them on unhardened shafts that are softer than the push nut. The nut bites into the metal to form an interference grip.

	Hex Wd.	Ht.	Flange Dia.	Min. Hardness	Pkg. Qty.		Pkg.
Zinc-Plated 1050 Spring Steel



	1/8"	5/16"	3/16"	7/16"	Rockwell C41	100	90533A131	00000


	1/8"	5/16"	13/64"	17/32"	Rockwell C41	100	90533A132	00000
	5/32"	3/8"	13/64"	9/16"	Rockwell C41	100	90533A150	00000
	3/16"	3/8"	7/32"	1/2"	Rockwell C41	100	90533A133	00000
	3/16"	3/8"	15/64"	5/8"	Rockwell C41	100	90533A134	00000
	1/4"	7/16"	15/64"	19/32"	Rockwell C41	100	90533A135	00000
	1/4"	7/16"	15/64"	11/16"	Rockwell C41	100	90533A136	00000
	5/16"	1/2"	5/16"	7/8"	Rockwell C41	50	90533A140	00000

Die Sets

A variety of sizes for adding fastener threads to studs and rods. A cut above lower-quality dies that can leave inferior threads, these are machined in the U.S. to precise dimensions for accuracy and consistency. Dies are adjustable, so you can create a shallow thread that makes it easier to get the die started on the first pass. Turn the set screw to open the die to its largest diameter. Then rotate the die with a round die wrench and adjust the screw as you make additional passes to reach the proper thread size.

Uncoated Carbon Steel—Our most economical dies, these are good for jobs that pop up. They work on most metal and plastic but will dull faster than high-speed steel dies.

Uncoated High-Speed Steel—The most versatile dies stay sharp and cut cleanly, even if you use them every day. They last much longer than carbon steel dies and you won’t have to work as hard to create threads.

	Dies						Die Wrenches
	No. of Dies	Thread Size	Thread Type	Container Type		Each		Each
Uncoated Carbon Steel







				13/16" OD

				6	2-56, 3-48, 4-40, 5-40, 6-32, 8-32	UNC	Plastic Case	2576A82	0000000	25565A19	00000


				6	2-64, 3-56, 4-48, 5-44, 6-40, 8-36	UNF	Plastic Case	2576A86	000000	25565A19	0000




						1" OD

						4	10-32, 1/4"-28, 5/16"-24, 3/8"-24	UNF	Plastic Case	2576A85	000000	25565A21	0000


						6	6-32, 8-32, 10-24, 1/4"-20, 5/16"-18, 3/8"-16	UNC	Plastic Case	2576A84	000000	25565A21	0000


						Uncoated High-Speed Steel







										13/16" OD

										6	5-40, 6-32, 8-32, 10-24, 1/4"-20, 5/16"-18	UNC	Plastic Case	2602A95	000000	25565A19	0000


										6	5-44, 6-40, 8-36, 10-32, 1/4"-28, 5/16"-24	UNF	Plastic Case	2602A96	000000	25565A19	0000




												1" OD

												4	10-32, 1/4"-28, 5/16"-24, 3/8"-24	UNF	Plastic Case	2602A98	000000	25565A21	0000


												6	6-32, 8-32, 10-24, 1/4"-20, 5/16"-18, 3/8"-16	UNC	Plastic Case	2602A97	000000	25565A21	0000

Pipe and Conduit Dies

Add threads to pipe and conduit when installing new runs or altering an existing system. A cut above lower-quality dies that can leave inferior threads, these are machined in the U.S. to precise dimensions for accuracy and consistency. They are adjustable, so you can create a shallow thread that makes it easier to get the die started on the first pass. Turn the set screw to open the die to its largest diameter. Then rotate the die with a round die wrench and adjust the screw as you make additional passes to reach the proper thread size.

Uncoated Carbon Steel—Our most economical dies, these are good for jobs that pop up. They work on most metal and plastic but will dull faster than high-speed steel dies.

	Dies						Die Wrenches
			Uncoated Carbon Steel		Uncoated High-Speed Steel
	Pipe Size	Threads per In.		Each		Each		Each
NPT Thread







				1" OD

				1/16	27	———	0	2556A111	000000	25565A21	00000


				1/8	27	———	0	2556A112	00000	25565A21	0000
				1/4	18	———	0	2556A113	00000	25565A21	0000




						1 1/2" OD

						1/16	27	———	0	2556A121	00000	25565A22	00000


						1/8	27	2685A111	000000	2556A122	00000	25565A22	00000
						1/4	18	2685A112	00000	2556A123	00000	25565A22	00000
						3/8	18	2685A12	00000	2556A124	00000	25565A22	00000
						1/2	14	2685A13	00000	2556A125	00000	25565A22	00000




								2" OD

								1/4	18	———	0	2556A131	00000	25565A25	00000


								3/8	18	———	0	2556A132	00000	25565A25	00000
								1/2	14	———	0	2556A133	000000	25565A25	00000
								3/4	14	2685A15	00000	2556A134	000000	25565A25	00000




										2 1/2" OD

										1	11 1/2	———	0	2556A144	000000	25565A26	00000




												3" OD

												1 1/4	11 1/2	———	0	2556A154	000000	25565A27	00000


												BSPT Thread







																1" OD

1/8	28															———	0	8287A21	00000	25565A21	0000


1/4	19															———	0	8287A22	00000	25565A21	0000




		1 1/2" OD

		3/8	19													———	0	8287A23	00000	25565A22	00000


		1/2	14													———	0	8287A24	000000	25565A22	00000




				2" OD

				3/4	14											———	0	8287A25	000000	25565A25	00000




																2 1/2" OD

																1	11	———	0	8287A26	000000	25565A26	00000




																3" OD

																1 1/4	11	———	0	8287A27	000000	25565A27	00000


																BSPP Thread







																		1" OD

																		1/8	28	———	0	8287A11	00000	25565A21	0000


										1/4	19							———	0	8287A12	00000	25565A21	0000




																		1 1/2" OD

												3/8						19	———	0	8287A13	00000	25565A22	00000


												1/2	14					———	0	8287A14	000000	25565A22	00000




														2" OD

														3/4	14			———	0	8287A15	000000	25565A25	00000




														2 1/2" OD

														1	11			———	0	8287A16	000000	25565A26	00000




																		3" OD

		1 1/4	11															———	0	8287A17	000000	25565A27	00000

Left-Hand Dies

Make your own threads instead of searching for left-hand fasteners, which can be expensive and hard to find. A cut above lower-quality dies that can leave inferior threads, these are machined in the U.S. to precise dimensions for accuracy and consistency. They are adjustable, so you can create a shallow thread that makes it easier to get the die started on the first pass. Turn the set screw to open the die to its largest diameter. Then rotate the die with a round die wrench and adjust the screw as you make additional passes to reach the proper thread size.

Uncoated Carbon Steel—Our most economical dies, these are good for jobs that pop up. They work on most metal and plastic but will dull faster than high-speed steel dies.

	Dies						Die Wrenches
			Uncoated Carbon Steel		Uncoated High-Speed Steel
	Thread Size	Thread Type		Each		Each		Each
13/16" OD



		6-32	UNC	2600A51	000000	2645A11	000000	25565A19	00000


		8-32	UNC	2600A52	00000	2645A12	00000	25565A19	0000
		10-24	UNC	2600A53	00000	2645A13	00000	25565A19	0000
		10-32	UNF	2600A54	00000	2645A14	00000	25565A19	0000
		1/4"-20	UNC	2600A55	00000	2645A15	00000	25565A19	0000
		1/4"-28	UNF	2600A56	00000	2645A16	00000	25565A19	0000
		5/16"-18	UNC	2600A57	00000	———	0	25565A19	0000
		5/16"-24	UNF	2600A58	00000	———	0	25565A19	0000
		3/8"-16	UNC	———	0	2645A17	00000	25565A19	0000
		3/8"-24	UNF	———	0	2645A18	00000	25565A19	0000


		1" OD



				6-32	UNC	2600A11	00000	2645A71	00000	25565A21	0000


				8-32	UNC	2600A12	00000	2645A72	00000	25565A21	0000
				10-24	UNC	2600A13	00000	2645A73	00000	25565A21	0000
				10-32	UNF	2600A14	00000	2645A74	00000	25565A21	0000
				1/4"-20	UNC	———	0	2645A75	00000	25565A21	0000
				1/4"-28	UNF	———	0	2645A76	00000	25565A21	0000
				5/16"-18	UNC	———	0	2645A77	00000	25565A21	0000
				5/16"-24	UNF	2600A18	00000	2645A78	00000	25565A21	0000
				3/8"-16	UNC	———	0	2645A79	00000	25565A21	0000
				3/8"-24	UNF	2600A21	00000	2645A81	00000	25565A21	0000
				1/2"-13	UNC	2600A24	00000	———	0	25565A21	0000


				1/2"-20	UNF	2600A25	00000	———	0	25565A21	0000
				M5 × 0.8 mm	Metric	———	0	2596A21	00000	25565A21	0000
				M6 × 1 mm	Metric	———	0	2596A22	00000	25565A21	0000
				M8 × 1.25 mm	Metric	———	0	2596A23	00000	25565A21	0000
				M10 × 1.5 mm	Metric	———	0	2596A24	00000	25565A21	0000
				M12 × 1.75 mm	Metric	———	0	2596A25	00000	25565A21	0000


				1 1/2" OD



						1/4"-20	UNC	2600A31	00000	2645A59	00000	25565A22	00000


						1/4"-28	UNF	2600A32	00000	2645A61	00000	25565A22	00000
						5/16"-18	UNC	2600A33	00000	———	0	25565A22	00000
						5/16"-24	UNF	2600A34	00000	———	0	25565A22	00000
						3/8"-16	UNC	2600A35	00000	2645A62	00000	25565A22	00000
						3/8"-24	UNF	2600A36	00000	2645A63	00000	25565A22	00000
						7/16"-14	UNC	2600A37	00000	2645A82	00000	25565A22	00000
						7/16"-20	UNF	2600A38	00000	2645A83	00000	25565A22	00000
						1/2"-13	UNC	2600A39	00000	2645A84	00000	25565A22	00000
						1/2"-20	UNF	2600A41	00000	2645A85	00000	25565A22	00000
						9/16"-18	UNF	———	0	2645A64	00000	25565A22	00000


						5/8"-11	UNC	———	0	2645A86	00000	25565A22	00000
5/8"-18						UNF	———	0	2645A87	00000	25565A22	00000
3/4"-10	UNC					———	0	2645A65	00000	25565A22	00000
3/4"-16	UNF					———	0	2645A66	00000	25565A22	00000
M10 × 1.5 mm	Metric					———	0	2596A41	00000	25565A22	00000
M12 × 1.75 mm	Metric					———	0	2596A42	00000	25565A22	00000
M14 × 2 mm	Metric					———	0	2596A43	00000	25565A22	00000
M16 × 2 mm	Metric					———	0	2596A44	00000	25565A22	00000
M18 × 1.5 mm	Metric					———	0	2596A45	00000	25565A22	00000
M18 × 2.5 mm	Metric					———	0	2596A46	00000	25565A22	00000


M20 × 2.5 mm	Metric					———	0	2596A32	00000	25565A22	00000


2" OD



						5/8"-11	UNC	2600A61	00000	2645A91	00000	25565A25	00000


		5/8"-18	UNF			2600A62	00000	2645A67	00000	25565A25	00000
		3/4"-10	UNC			2600A63	00000	2645A89	00000	25565A25	00000
		3/4"-16	UNF			2600A64	00000	2645A68	00000	25565A25	00000
		1"-8	UNC			———	0	2645A69	00000	25565A25	00000

Dies

Rotate these dies around studs and rods to create new fastener threads. A cut above lower-quality dies that can leave inferior threads, these are machined in the U.S. to precise dimensions for accuracy and consistency.

They are adjustable, so you can cut a shallow thread that makes it easier to get the die started on the first pass. Turn the set screw to open the die to its largest diameter. Then rotate the die with a round die wrench and adjust the screw as you make additional passes to reach the proper thread size.

Uncoated Carbon Steel—Our most economical dies, these are good for jobs that pop up. They work on most metal and plastic but will dull faster than high-speed steel dies.

Titanium Nitride (TiN)-Coated High-Speed Steel—When you regularly work on challenging metals like stainless steel, choose dies with a TiN coating that reduces friction and resists heat. They turn faster and last longer than uncoated dies.

	Dies								Die Wrenches
			Uncoated Carbon Steel		Uncoated High-Speed Steel		Titanium Nitride (TiN)-Coated High-Speed Steel
	Thread Size	Thread Type		Each		Each		Each		Each
13/16" OD



		0-80	UNF	2576A232	000000	2602A125	000000	———	0	25565A19	00000


		1-64	UNC	2576A131	00000	2602A121	00000	———	0	25565A19	0000
		1-72	UNF	2576A233	00000	2602A131	00000	———	0	25565A19	0000
		2-56	UNC	2576A132	00000	2602A122	00000	———	0	25565A19	0000
		2-64	UNF	2576A234	00000	2602A132	00000	———	0	25565A19	0000
		3-48	UNC	2576A133	00000	2602A123	00000	———	0	25565A19	0000
		3-56	UNF	2576A235	00000	2602A133	00000	———	0	25565A19	0000
		4-40	UNC	2576A134	00000	2602A124	00000	———	0	25565A19	0000
		4-48	UNF	2576A236	00000	2602A134	00000	———	0	25565A19	0000
		5-40	UNC	2576A135	00000	2602A11	00000	———	0	25565A19	0000
		5-44	UNF	2576A237	00000	2602A51	00000	———	0	25565A19	0000


		6-32	UNC	2576A136	00000	2602A12	00000	———	0	25565A19	0000
		6-40	UNF	2576A238	00000	2602A52	00000	———	0	25565A19	0000
		8-32	UNC	2576A137	00000	2602A13	00000	———	0	25565A19	0000
		8-36	UNF	2576A239	00000	2602A53	00000	———	0	25565A19	0000
		10-24	UNC	2576A138	00000	2602A14	00000	———	0	25565A19	0000
		10-32	UNF	2576A241	00000	2602A54	00000	———	0	25565A19	0000
		12-24	UNC	2576A139	00000	2602A15	00000	———	0	25565A19	0000
		12-28	UNF	2576A242	00000	2602A55	00000	———	0	25565A19	0000
		1/4"-20	UNC	———	0	2602A16	00000	———	0	25565A19	0000
		1/4"-28	UNF	———	0	2602A56	00000	———	0	25565A19	0000


		5/16"-18	UNC	———	0	2602A17	00000	———	0	25565A19	0000
		5/16"-24	UNF	———	0	2602A57	00000	———	0	25565A19	0000
		M2.5 × 0.45 mm	Metric	———	0	8294A11	00000	———	0	25565A19	0000
		M3 × 0.5 mm	Metric	———	0	8294A12	00000	———	0	25565A19	0000
		M3.5 × 0.6 mm	Metric	———	0	8294A13	00000	———	0	25565A19	0000
		M4 × 0.7 mm	Metric	———	0	8294A14	00000	———	0	25565A19	0000
		M4.5 × 0.75 mm	Metric	———	0	8294A15	00000	———	0	25565A19	0000
		M5 × 0.8 mm	Metric	———	0	8294A16	00000	———	0	25565A19	0000
		M6 × 1 mm	Metric	———	0	8294A17	00000	———	0	25565A19	0000


		1" OD



				6-32	UNC	2576A141	00000	2602A21	00000	———	0	25565A21	0000


				6-40	UNF	———	0	2602A282	00000	———	0	25565A21	0000
				6-48	UNS	———	0	26005A231	00000	———	0	25565A21	0000
				8-32	UNC	2576A142	00000	2602A22	00000	———	0	25565A21	0000
				8-36	UNF	———	0	2602A283	00000	———	0	25565A21	0000
				8-40	UNS	———	0	26005A232	00000	———	0	25565A21	0000
				10-24	UNC	2576A143	00000	2602A23	00000	———	0	25565A21	0000
				10-32	UNF	2576A245	00000	2602A61	00000	———	0	25565A21	0000
				10-40	UNS	———	0	26005A233	00000	———	0	25565A21	0000
				12-24	UNC	2576A144	00000	2602A24	00000	———	0	25565A21	0000
				12-28	UNF	———	0	2602A284	00000	———	0	25565A21	0000


				12-32	UNEF	———	0	26005A235	00000	———	0	25565A21	0000
				12-36	UNS	———	0	26005A236	00000	———	0	25565A21	0000
				1/4"-20	UNC	2576A451	00000	2602A25	00000	8349A11	0000000	25565A21	0000
				1/4"-24	UNS	———	0	26005A112	00000	———	0	25565A21	0000
1/4"-27				UNS	———	0	26005A113	00000	———	0	25565A21	0000
1/4"-28	UNF			2576A455	00000	2602A62	00000	8349A12	000000	25565A21	0000
1/4"-32	UNEF			———	0	26005A211	00000	———	0	25565A21	0000
1/4"-36	UNS			———	0	26005A223	00000	———	0	25565A21	0000
1/4"-40	UNS			———	0	26005A114	00000	———	0	25565A21	0000
1/4"-48	UNS			———	0	26005A224	00000	———	0	25565A21	0000


1/4"-64	UNS			———	0	26005A225	00000	———	0	25565A21	0000
5/16"-18	UNC			2576A452	00000	2602A26	00000	8349A13	000000	25565A21	0000
5/16"-20	UNS			———	0	26005A116	00000	———	0	25565A21	0000
5/16"-24	UNF			2576A456	00000	2602A63	00000	8349A14	000000	25565A21	0000
5/16"-27	UNS			———	0	26005A117	00000	———	0	25565A21	0000
5/16"-32	UNEF			———	0	26005A212	00000	———	0	25565A21	0000
5/16"-40	UNS			———	0	26005A118	00000	———	0	25565A21	0000
3/8"-16	UNC			2576A453	00000	2602A27	00000	8349A15	000000	25565A21	0000
3/8"-18	UNS			———	0	26005A121	00000	———	0	25565A21	0000
3/8"-20	UNS			———	0	26005A122	00000	———	0	25565A21	0000


3/8"-24	UNF			2576A457	00000	2602A64	00000	8349A16	000000	25565A21	0000
3/8"-27	UNS			———	0	26005A123	00000	———	0	25565A21	0000
3/8"-32	UNEF			———	0	26005A213	00000	———	0	25565A21	0000
3/8"-40	UNS			———	0	26005A124	00000	———	0	25565A21	0000
7/16"-14	UNC			2576A454	00000	2602A28	00000	8349A17	000000	25565A21	0000
7/16"-20	UNF			2576A458	00000	2602A65	00000	8349A18	000000	25565A21	0000
1/2"-13	UNC			2576A261	00000	2602A281	00000	8349A19	000000	25565A21	0000
1/2"-20	UNF			2576A262	00000	2602A285	00000	8349A21	000000	25565A21	0000
M3 × 0.5 mm	Metric			———	0	8294A37	00000	———	0	25565A21	0000
M3 × 0.6 mm	Metric			———	0	8294A38	00000	———	0	25565A21	0000


M3.5 × 0.6 mm	Metric			———	0	8294A39	00000	———	0	25565A21	0000
M4 × 0.7 mm	Metric			———	0	8294A41	00000	———	0	25565A21	0000
M4.5 × 0.75 mm	Metric			———	0	8294A42	00000	———	0	25565A21	0000
M5 × 0.8 mm	Metric			———	0	8294A43	00000	———	0	25565A21	0000
M6 × 0.75 mm	Metric			———	0	8294A44	00000	———	0	25565A21	0000
M6 × 1 mm	Metric			———	0	8294A21	00000	8349A51	000000	25565A21	0000
M7 × 0.75 mm	Metric			———	0	8294A45	00000	———	0	25565A21	0000
M7 × 1 mm	Metric			———	0	8294A22	00000	8349A52	000000	25565A21	0000
M8 × 1 mm	Metric			———	0	8294A46	00000	8349A53	000000	25565A21	0000
M8 × 1.25 mm	Metric			———	0	8294A23	00000	8349A54	000000	25565A21	0000

M9 × 1 mm	Metric	———	0	8294A47	00000	———	0	25565A21	0000
M9 × 1.25 mm	Metric	———	0	8294A48	00000	8349A55	000000	25565A21	0000
M10 × 1.25 mm	Metric	———	0	———	0	8349A56	000000	25565A21	0000
M10 × 1.5 mm	Metric	———	0	8294A24	00000	8349A57	000000	25565A21	0000
M11 × 1.5 mm	Metric	———	0	———	0	8349A58	000000	25565A21	0000
M12 × 1.25 mm	Metric	———	0	———	0	8349A61	000000	25565A21	0000
M12 × 1.75 mm	Metric	———	0	8294A25	00000	8349A62	000000	25565A21	0000

1 1/2" OD



		1/4"-20	UNC	2576A621	00000	2602A31	00000	———	0	25565A22	00000


		1/4"-28	UNF	2576A628	00000	2602A71	00000	———	0	25565A22	00000
		5/16"-18	UNC	2576A622	00000	2602A32	00000	———	0	25565A22	00000
		5/16"-24	UNF	2576A629	00000	2602A72	00000	———	0	25565A22	00000
		3/8"-16	UNC	2576A623	00000	2602A33	00000	———	0	25565A22	00000
		3/8"-24	UNF	2576A631	00000	2602A73	00000	———	0	25565A22	00000
		7/16"-14	UNC	2576A624	00000	2602A34	00000	———	0	25565A22	00000
		7/16"-16	UNS	———	0	26005A126	00000	———	0	25565A22	00000
		7/16"-18	UNS	———	0	26005A127	00000	———	0	25565A22	00000
		7/16"-20	UNF	2576A632	00000	2602A74	00000	———	0	25565A22	00000
		7/16"-24	UNS	———	0	26005A128	00000	———	0	25565A22	00000


		7/16"-27	UNS	———	0	26005A129	00000	———	0	25565A22	00000
		7/16"-32	UNS	———	0	26005A131	00000	———	0	25565A22	00000
		7/16"-40	UNS	———	0	26005A132	00000	———	0	25565A22	00000
		1/2"-12	UNS	———	0	26005A227	000000	———	0	25565A22	00000
		1/2"-13	UNC	2576A625	00000	2602A35	00000	———	0	25565A22	00000
		1/2"-16	UNS	———	0	26005A134	000000	———	0	25565A22	00000
		1/2"-20	UNF	2576A633	00000	2602A75	00000	———	0	25565A22	00000
		1/2"-24	UNS	———	0	26005A135	000000	———	0	25565A22	00000
		1/2"-27	UNS	———	0	26005A136	000000	———	0	25565A22	00000
		1/2"-28	UNEF	———	0	26005A214	000000	———	0	25565A22	00000


		1/2"-32	UNS	———	0	26005A137	000000	———	0	25565A22	00000
		1/2"-40	UNS	———	0	26005A138	000000	———	0	25565A22	00000
		9/16"-12	UNC	2576A626	00000	2602A36	00000	———	0	25565A22	00000
		9/16"-16	UNS	———	0	26005A141	000000	———	0	25565A22	00000
		9/16"-18	UNF	2576A634	00000	2602A76	00000	———	0	25565A22	00000
		9/16"-20	UNS	———	0	26005A142	000000	———	0	25565A22	00000
		9/16"-24	UNEF	———	0	26005A215	000000	———	0	25565A22	00000
		9/16"-27	UNS	———	0	26005A143	000000	———	0	25565A22	00000
		9/16"-32	UNS	———	0	26005A144	000000	———	0	25565A22	00000
		5/8"-11	UNC	2576A627	00000	2602A37	00000	———	0	25565A22	00000


		5/8"-12	UNS	———	0	26005A146	000000	———	0	25565A22	00000
		5/8"-16	UNS	———	0	26005A147	000000	———	0	25565A22	00000
		5/8"-18	UNF	2576A635	00000	2602A77	00000	———	0	25565A22	00000
		5/8"-20	UNS	———	0	26005A148	000000	———	0	25565A22	00000
		5/8"-24	UNEF	———	0	26005A216	000000	———	0	25565A22	00000
		5/8"-27	UNS	———	0	26005A149	000000	———	0	25565A22	00000
		5/8"-28	UNS	———	0	26005A151	000000	———	0	25565A22	00000
		5/8"-32	UNS	———	0	26005A152	000000	———	0	25565A22	00000
		3/4"-10	UNC	2576A263	00000	2602A371	00000	———	0	25565A22	00000
		3/4"-16	UNF	2576A264	00000	2602A372	00000	———	0	25565A22	00000


		M10 × 1 mm	Metric	———	0	8294A56	00000	———	0	25565A22	00000
		M10 × 1.25 mm	Metric	———	0	8294A57	00000	———	0	25565A22	00000
		M10 × 1.5 mm	Metric	———	0	8294A58	00000	———	0	25565A22	00000
		M11 × 1.5 mm	Metric	———	0	8294A59	00000	———	0	25565A22	00000
		M12 × 1 mm	Metric	———	0	8294A591	00000	———	0	25565A22	00000
		M12 × 1.25 mm	Metric	———	0	8294A35	00000	———	0	25565A22	00000
		M12 × 1.5 mm	Metric	———	0	8294A61	00000	———	0	25565A22	00000
		M12 × 1.75 mm	Metric	———	0	8294A62	00000	———	0	25565A22	00000
		M14 × 1.25 mm	Metric	———	0	8294A63	00000	———	0	25565A22	00000
		M14 × 1.5 mm	Metric	———	0	8294A36	00000	———	0	25565A22	00000

M14 × 2 mm	Metric	———	0	8294A31	00000	———	0	25565A22	00000
M16 × 1.5 mm	Metric	———	0	8294A64	00000	———	0	25565A22	00000
M16 × 2 mm	Metric	———	0	8294A32	00000	———	0	25565A22	00000
M18 × 1.5 mm	Metric	———	0	8294A65	00000	———	0	25565A22	00000
M18 × 2 mm	Metric	———	0	8294A66	00000	———	0	25565A22	00000
M18 × 2.5 mm	Metric	———	0	8294A33	00000	———	0	25565A22	00000
M20 × 2.5 mm	Metric	———	0	8294A34	00000	———	0	25565A22	00000

2" OD



		1/4"-20	UNC	2576A721	00000	2602A381	00000	———	0	25565A25	00000


		1/4"-28	UNF	2576A731	00000	2602A388	00000	———	0	25565A25	00000
		5/16"-18	UNC	2576A722	00000	2602A382	00000	———	0	25565A25	00000
		5/16"-24	UNF	2576A733	00000	2602A389	00000	———	0	25565A25	00000
		3/8"-16	UNC	2576A723	00000	2602A383	00000	———	0	25565A25	00000
		3/8"-24	UNF	2576A734	00000	2602A391	00000	———	0	25565A25	00000
		7/16"-14	UNC	2576A724	00000	2602A384	00000	———	0	25565A25	00000
		7/16"-20	UNF	2576A735	00000	2602A392	00000	———	0	25565A25	00000
		1/2"-13	UNC	2576A725	00000	2602A385	00000	———	0	25565A25	00000
		1/2"-20	UNF	2576A736	00000	2602A393	00000	———	0	25565A25	00000
		9/16"-12	UNC	2576A726	00000	2602A386	00000	———	0	25565A25	00000


		9/16"-18	UNF	2576A737	00000	2602A394	00000	———	0	25565A25	00000
		5/8"-11	UNC	2576A727	00000	2602A41	00000	8349A33	000000	25565A25	00000
		5/8"-18	UNF	2576A759	00000	2602A81	00000	8349A34	000000	25565A25	00000
		11/16"-11	UNS	———	0	26005A242	00000	8349A35	000000	25565A25	00000
		11/16"-16	UNS	———	0	26005A243	00000	8349A36	000000	25565A25	00000
		11/16"-18	UNS	———	0	26005A154	000000	———	0	25565A25	00000
		11/16"-20	UNS	———	0	26005A155	000000	———	0	25565A25	00000
		11/16"-24	UNEF	———	0	26005A217	000000	———	0	25565A25	00000
		11/16"-32	UNS	———	0	26005A157	000000	———	0	25565A25	00000
		3/4"-10	UNC	2576A728	00000	2602A42	00000	8349A37	000000	25565A25	00000


		3/4"-12	UNS	———	0	26005A161	000000	———	0	25565A25	00000
		3/4"-16	UNF	2576A738	00000	2602A82	00000	8349A38	000000	25565A25	00000
		3/4"-18	UNS	———	0	26005A162	000000	———	0	25565A25	00000
		3/4"-20	UNEF	———	0	26005A219	000000	———	0	25565A25	00000
		3/4"-24	UNS	———	0	26005A163	000000	———	0	25565A25	00000
		3/4"-27	UNS	———	0	26005A164	000000	———	0	25565A25	00000
		3/4"-32	UNS	———	0	26005A165	000000	———	0	25565A25	00000
		13/16"-16	UNS	———	0	26005A171	000000	———	0	25565A25	00000
		13/16"-18	UNS	———	0	26005A228	000000	———	0	25565A25	00000
		13/16"-20	UNEF	———	0	26005A244	000000	———	0	25565A25	00000


		7/8"-9	UNC	2576A729	00000	2602A43	00000	8349A39	000000	25565A25	00000
		7/8"-12	UNS	———	0	26005A174	000000	———	0	25565A25	00000
		7/8"-14	UNF	2576A739	00000	2602A83	00000	8349A41	000000	25565A25	00000
		7/8"-16	UNS	———	0	26005A175	000000	———	0	25565A25	00000
		7/8"-18	UNS	———	0	26005A176	000000	———	0	25565A25	00000
		7/8"-20	UNEF	———	0	26005A245	000000	———	0	25565A25	00000
		7/8"-24	UNS	———	0	26005A177	000000	———	0	25565A25	00000
		7/8"-27	UNS	———	0	26005A178	000000	———	0	25565A25	00000
		7/8"-32	UNS	———	0	26005A179	000000	———	0	25565A25	00000
		15/16"-16	UNS	———	0	26005A183	000000	———	0	25565A25	00000


		15/16"-18	UNS	———	0	26005A184	000000	———	0	25565A25	00000
		15/16"-20	UNEF	———	0	26005A226	000000	———	0	25565A25	00000
		15/16"-32	UNS	———	0	26005A185	000000	———	0	25565A25	00000
		1"-8	UNC	2576A265	00000	2602A387	00000	8349A42	000000	25565A25	00000
		1"-12	UNF	2576A266	00000	2602A395	00000	8349A43	000000	25565A25	00000
		1"-14	UNS	———	0	26005A221	00000	———	0	25565A25	00000
		1"-16	UNS	———	0	26005A191	000000	———	0	25565A25	00000
		1"-18	UNS	———	0	26005A192	000000	———	0	25565A25	00000
		1"-20	UNEF	———	0	26005A222	000000	———	0	25565A25	00000
		1"-24	UNS	———	0	26005A193	000000	———	0	25565A25	00000

1"-32	UNS	———	0	26005A195	000000	———	0	25565A25	00000
M14 × 1.5 mm	Metric	———	0	———	0	8349A71	000000	25565A25	00000
M14 × 2 mm	Metric	———	0	———	0	8349A72	000000	25565A25	00000
M16 × 1.5 mm	Metric	———	0	———	0	8349A73	000000	25565A25	00000
M18 × 1.5 mm	Metric	———	0	———	0	8349A74	000000	25565A25	00000
M18 × 2.5 mm	Metric	———	0	———	0	8349A75	000000	25565A25	00000
M20 × 1.5 mm	Metric	———	0	8294A51	00000	8349A76	000000	25565A25	00000
M20 × 2.5 mm	Metric	———	0	8294A72	00000	8349A77	000000	25565A25	00000
M22 × 1.5 mm	Metric	———	0	8294A52	00000	8349A78	000000	25565A25	00000
M22 × 2.5 mm	Metric	———	0	8294A73	00000	8349A79	000000	25565A25	00000
M24 × 1.5 mm	Metric	———	0	8294A53	00000	———	0	25565A25	00000
M24 × 2 mm	Metric	———	0	8294A74	00000	8349A81	000000	25565A25	00000
M24 × 3 mm	Metric	———	0	8294A54	00000	———	0	25565A25	00000
M25 × 1.5 mm	Metric	———	0	8294A55	00000	———	0	25565A25	00000
M25 × 2 mm	Metric	———	0	8294A75	00000	———	0	25565A25	00000
M26 × 3 mm	Metric	———	0	8294A76	00000	———	0	25565A25	00000

2 1/2" OD



		5/8"-11	UNC	2576A741	000000	———	0	———	0	25565A26	00000


		3/4"-10	UNC	2576A742	000000	———	0	———	0	25565A26	00000
		3/4"-16	UNF	2576A743	000000	———	0	———	0	25565A26	00000
		7/8"-9	UNC	2576A744	000000	———	0	———	0	25565A26	00000
		7/8"-14	UNF	2576A745	000000	———	0	———	0	25565A26	00000
		1"-8	UNC	2576A746	000000	———	0	———	0	25565A26	00000
		1"-12	UNF	2576A747	000000	———	0	———	0	25565A26	00000
		M27 × 3 mm	Metric	———	0	8294A78	000000	———	0	25565A26	00000
		M28 × 2 mm	Metric	———	0	8294A79	000000	———	0	25565A26	00000
		M28 × 3 mm	Metric	———	0	8294A82	000000	———	0	25565A26	00000
		M30 × 1.5 mm	Metric	———	0	8294A821	000000	———	0	25565A26	00000


		M30 × 2 mm	Metric	———	0	8294A83	000000	———	0	25565A26	00000
		M30 × 3 mm	Metric	———	0	8294A84	000000	———	0	25565A26	00000
		M30 × 3.5 mm	Metric	———	0	8294A85	000000	———	0	25565A26	00000
		M32 × 2 mm	Metric	———	0	8294A86	000000	———	0	25565A26	00000
		M33 × 2 mm	Metric	———	0	8294A87	000000	———	0	25565A26	00000
		M33 × 3 mm	Metric	———	0	8294A88	000000	———	0	25565A26	00000
		M34 × 3.5 mm	Metric	———	0	8294A89	000000	———	0	25565A26	00000
		M36 × 2 mm	Metric	———	0	8294A93	000000	———	0	25565A26	00000
		M36 × 3 mm	Metric	———	0	8294A94	000000	———	0	25565A26	00000
		M36 × 4 mm	Metric	———	0	8294A95	000000	———	0	25565A26	00000


		3" OD



				1"-8	UNC	2576A748	000000	———	0	———	0	25565A27	00000


				1"-12	UNF	2576A749	000000	———	0	———	0	25565A27	00000
				1 1/8"-7	UNC	2576A751	000000	2602A462	000000	———	0	25565A27	00000
				1 1/8"-12	UNF	2576A752	000000	2602A466	000000	———	0	25565A27	00000
				1 1/4"-7	UNC	2576A753	000000	2602A463	000000	———	0	25565A27	00000
				1 1/4"-12	UNF	2576A754	000000	2602A467	000000	———	0	25565A27	00000
				1 3/8"-6	UNC	2576A755	000000	2602A464	000000	———	0	25565A27	00000
				1 3/8"-12	UNF	———	0	2602A468	000000	———	0	25565A27	00000
				1 1/2"-6	UNC	2576A757	000000	2602A465	000000	———	0	25565A27	00000
				1 1/2"-12	UNF	2576A758	000000	2602A469	000000	———	0	25565A27	00000