Filter by
DFARS Compliance
Screw Size
About Gears
More
Wall-Mount Thread-It Screw, Bolt, and Nut Size Identifiers
Mount to a wall for easy access, and thread your fastener into holes or onto plugs for quick and accurate size identification.
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Use With | For Thread Type | For Thread Location | For Thread Size  | Wd. | Ht. | Thick. | No. of | Hole Dia. | Fasteners Included | Each | |
Inch/Metric | |||||||||||
Steel | |||||||||||
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF/Metric | External/Internal | 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, M7 × 1 mm, M8 × 1 mm, M8 × 1.25 mm, M10 × 1 mm, M10 × 1.25 mm, M10 × 1.5 mm, M12 × 1.25 mm, M12 × 1.5 mm, M12 × 1.75 mm, 7/16"-14 | 3" | 39" | 1/2" | 3 | 5/16" | No | 00000000 | 000000 |
Thread-It Screw, Bolt, and Nut Size Identifiers
Thread your fastener into holes or onto plugs for quick and accurate size identification.
| For Use With | For Thread Type | For Thread Location | For Thread Size | Each | |
Inch | |||||
|---|---|---|---|---|---|
Steel | |||||
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF | External/Internal | 6-32, 6-40, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 1"-8, 1"-12 | 00000000 | 000000 |
Inch/Metric | |||||
Steel | |||||
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF/Metric | External/Internal | 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, M7 × 1 mm, M8 × 1 mm, M8 × 1.25 mm, M10 × 1 mm, M10 × 1.25 mm, M10 × 1.5 mm, M12 × 1.25 mm, M12 × 1.5 mm, M12 × 1.75 mm | 00000000 | 00000 |
Thread Identifier Sets
Set includes calipers and gauges to identify external and internal threads.
Container | |||||||
|---|---|---|---|---|---|---|---|
| For Use With | For Thread Type | For Thread Location | Type | Material | Includes | Each | |
Inch, Metric | |||||||
Steel | |||||||
| Screws, Bolts, Threaded Rods, Nuts, Pipe | NPT, UNC, UNF, BSPT, BSPP, Metric | External/Internal | Folding Case | Plastic | Caliper, Instruction Book, Two Steel Angle Gauges, Two Steel Gauges | 000000 | 000000 |
Threads per Inch and Thread Pitch Identifiers
Determine threads per inch and thread pitch on a variety of external and internal threads.
Folded | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Use With | For Thread Type | For Thread Location | For Threads per Inch | For Thread Pitch | No. of Identifiers | Lg. | Wd. | Manufacturer | Manufacturer Model No. | Each | |
Inch | |||||||||||
Steel | |||||||||||
| Screws, Bolts, Threaded Rods | BSW | External/Internal | 4, 4 1/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 34, 36, 40, 48, 60 | __ | 28 | 2 3/4" | 3/4" | Mitutoyo | 188-102 | 000000 | 000000 |
| Screws, Bolts, Threaded Rods | BSW | External/Internal | 4, 4 1/2, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 36, 40, 48, 60, 62 | __ | 28 | 2 3/4" | 1/2" | __ | __ | 0000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF | External/Internal | 4, 4 1/2, 5, 5 1/2, 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42 | __ | 30 | 2 3/4" | 1/2" | __ | __ | 0000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF | External/Internal | 4, 4 1/2, 5, 5 1/2, 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 84 | __ | 51 | 2 1/4" | 2 1/4" | __ | __ | 0000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF | External/Internal | 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42, 48, 50, 56, 60 | __ | 30 | 2 3/4" | 1/2" | __ | __ | 000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF | External/Internal | 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40 | __ | 22 | 2 3/4" | 1/2" | __ | __ | 000000 | 00000 |
Stainless Steel | |||||||||||
| Screws, Bolts, Threaded Rods, Nuts | Acme | External/Internal | 1, 1 1/3, 1 1/2, 1 3/4, 2, 2 1/2, 3, 3 1/2, 4, 5, 6, 7, 8, 9, 10, 12 | __ | 16 | 4 3/4" | 1" | __ | __ | 0000000 | 000000 |
Inch/Metric | |||||||||||
Steel | |||||||||||
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF/Metric | External/Internal | 4, 4 1/2, 5, 5 1/2, 6, 7, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 28, 29, 30, 32, 34, 36, 38, 40, 42 | 0.4 mm, 0.5 mm, 0.7 mm, 0.75 mm, 0.8 mm, 0.9 mm, 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm | 51 | 2 3/4" | 1/2" | __ | __ | 0000000 | 00000 |
| Screws, Bolts, Threaded Rods, Nuts | UNC/UNF/Metric | External/Internal | 4, 6, 8, 10, 11, 11 1/2, 12, 13, 16, 20, 28, 32, 40, 56 | 0.5 mm, 0.75 mm, 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm | 28 | 2 3/4" | 1/2" | __ | __ | 0000000 | 00000 |
Screw Size Identifiers
Inch
Find thread size, screw size, diameter, or drill bit size.
| For Use With | For Thread Type | For Thread Location | For Thread Size | For Screw Size | For Dia. | For Drill Bit Size | Wd. | Ht. | Thick. | Each | |
Inch | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Steel | |||||||||||
| Screws, Bolts, Threaded Rods, Pins, Rivets, Drill Bits | UNC/UNF | External | 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-36, 4-40, 4-48, 5-40, 5-44, 6-32, 6-36, 6-40, 8-32, 8-36, 8-40, 10-24, 10-32, 12-24, 12-28, 12-32, 1/4"-20, 1/4"-28, 1/4"-32, 5/16"-18, 5/16"-24, 5/16"-32 | No. 1, No. 2, No. 3, No. 4, No. 5, 1/8", No. 6, 5/32", No. 8, 3/16", No. 10, No. 12, 7/32", 1/4", 9/32", 5/16" | 0.073", 0.086", 3/32", 0.112", 1/8", 0.138", 5/32", 0.164", 3/16", 7/32", 1/4", 9/32", 5/16" | 7/32", 1/4", 9/32", 5/16", 53 ga, 51 ga, 50 ga, 48 ga, 47 ga, 45 ga, 43 ga, 42 ga, 39 ga, 38 ga, 37 ga, 36 ga, 35 ga, 33 ga, 30 ga, 29 ga, 28 ga, 25 ga, 23 ga, 21 ga, 19 ga, 16 ga, 14 ga, 13 ga, 10 ga, 8 ga, 3 ga, F, I | 3" | 5 1/8" | 5/64" | 000000000 | 000000 |
Screw, Bolt, and Nut Size Identifiers
Inch
Inch/Metric
Use on external and internal fastener threads.
| For Use With | For Thread Location | For Screw Size | For Nut Size | Wd. | Ht. | Thick. | Each | |
Inch | ||||||||
|---|---|---|---|---|---|---|---|---|
Plastic | ||||||||
| Screws, Bolts, Threaded Rods, Nuts | External/Internal | No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" | No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" | 7 1/2" | 2 3/8" | 1/64" | 000000000 | 00000 |
Inch/Metric | ||||||||
Plastic | ||||||||
| Screws, Bolts, Threaded Rods, Nuts | External/Internal | No. 6, No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 1", M6, M7, M8, M10, M12, M14, M16, M18, M20, M22 | No. 8, No. 10, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" | 9" | 3 3/4" | 1/64" | 000000000 | 00000 |
Threads per Inch and Center Identifiers
Identify threads per inch on external threads and find the center of your workpiece to line up thread-cutting tools. This identifier has a corrosion-resistant satin-chrome finish that reduces glare.
| For Use With | For Thread Type | For Thread Location | For Threads per Inch | Lg. | Wd. | Thick. | Appearance | Each | |
Inch | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Chrome Plated Steel | |||||||||
| Screws, Bolts, Threaded Rods | UNC/UNF | External | 14, 20, 24, 32 | 2 1/4" | 3/4" | 3/64" | Satin | 0000000 | 000000 |
Acme Thread Identifiers
Identify Acme threads and use as a guide while grinding and cutting Acme threads to a 29° included angle.
| For Use With | For Thread Location | For Threads per Inch | Wd. | Ht. | Thick. | Each | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| Screws, Bolts, Threaded Rods | External | 1, 1 1/3, 1 1/2, 1 3/4, 2, 2 1/2, 3, 4, 5, 6, 7, 8, 9, 10 | 3 3/8" | 1 5/8" | 7/64" | 0000000 | 000000 |
Pipe, Tubing, and Hose Size Identifiers
For Pipe, Tubing, And Hose
For Pipe, Pipe Fittings, And Hose
Determine pipe size and inner and outer diameter.
Pipe, pipe fittings, and hose identifier is stainless steel for corrosion resistance.
| For Use With | For Pipe Size | For Pipe Fitting Size | For Tube OD | For Hose ID | Includes | Wd. | Ht. | Thick. | Color | Each | |
Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe, Tubing, Hose | 1/8, 1/4, 3/8, 1/2, 3/4 | __ | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 1" | 1/4", 3/8", 1/2", 3/4", 1" | Compression Fitting Chart | 9" | 3 3/4" | 7/64" | Blue | 0000000 | 00000 |
Stainless Steel | |||||||||||
| Pipe, Pipe Fittings, Hose | 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | __ | 1/8", 1/4", 5/16", 3/8", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4" | __ | 3 3/4" | 4 1/2" | 1/32" | Silver | 00000000 | 00000 |
Drill Bit Size Identifiers
Inch
Measure drill bit sizes with these identifiers.
| For System of Measurement | For Use With | For Drill Bit Size | Wd. | Ht. | Thick. | Material | Color | Mounting Hole Dia. | Each | |
| Inch | Drills | 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2" | 2 1/2" | 6 1/2" | 5/64" | Steel | Silver | 1/8" | 0000000 | 000000 |
Threads per Inch and Thread Pitch Size Checkers
Inspect fasteners and verify threads with this checker. It includes three wires for each of the pitch diameters. Select the wire that best fits the threads; then calculate the pitch diameter with the equations provided.
Wire | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Use With | For Thread Type | For Thread Location | For Threads per Inch | For Thread Pitch | For Acme Threads per Inch | No. of Wires | Lg. | Material | Container | Container Material | Each | |
Inch; Metric | ||||||||||||
| Screws, Bolts, Threaded Rods, Pipe | NPT, UNC, UNF, Metric, Acme | External | 3, 3 1/2, 4, 4 1/2, 5, 5 1/2, 6, 7, 7 1/2, 8, 9, 10, 11, 11 1/2, 12, 13, 14, 16, 18, 20, 24, 27, 28, 32, 36, 40, 44, 48 | 0.5 mm, 0.6 mm, 0.7 mm, 0.75 mm, 0.8 mm, 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm | 3, 4, 5, 6, 8, 10, 12, 14, 16 | 48 | 2 3/4" | Stainless Steel | Pouch | Vinyl | 000000 | 000000 |
Gear Tooth Pitch Identifiers
When replacing a gear, use these gauges to identify pressure angle, pitch, and module.
| For Gear Type | For System of Measurement | For Pitch | Number of Identifiers | Material | Each | |
For 14 1/2° Pressure Angles | ||||||
|---|---|---|---|---|---|---|
| Spur Gears | Inch | 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 36, 40, 48, 64, 80 | 22 | Steel | 0000000 | 0000000 |
For 14 1/2° and 20° Pressure Angles | ||||||
| Spur Gears, Bevel Gears, Helical Gears, Miter Gears | Inch | 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32 | 22 | Stainless Steel | 0000000 | 000000 |