About Sealant Flexibility
More
About Lubricants
More
Solid and Paste Milling, Drilling, and Turning Coolants
An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used with shallow drilling, reaming, and tapping, as well as on saw blades. Remove from tools and work surfaces with alcohol, methyl ethyl ketone, or a parts washer. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Coolant in a jar is a paste. It can also be used as a bending and forming paste.
Container | ||||
|---|---|---|---|---|
| Size, fl. oz. | Type | Compatible With | Each | |
Synthetic Base Oil | ||||
| 12 | Jar | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 000000 |
Container | |||||
|---|---|---|---|---|---|
| Size, fl. oz. | Type | Compatible With | Pkg. Qty. | Pkg. | |
Synthetic Base Oil | |||||
| 12 | Jar | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 12 | 00000000 | 0000000 |
Solid and Paste Milling, Turning, and Sawing Lubricants
Reduce mess and waste with these easy-to-apply, nonstaining lubricants. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. All resist running and dripping. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free.
Lubricants in a tube dispense as a paste and are good for vertical applications.
Lubricants that cannot be sold to the regions listed are restricted by product labeling requirements.
Non-Hardening High-Temperature Thread Sealants
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.
Container | Max. Pressue, psi | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Net Weight, lbs. | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Color | Each | |
Low Locking Strength | ||||||||||
Key Graphite Sealants | ||||||||||
| __ | 0.625 | Brush-Top Can | 15,000 | 15,000 | -30° to 750° | 4" | Paste | Black | 000000 | 000000 |
| __ | 1 | Can | 15,000 | 15,000 | -30° to 750° | 4" | Paste | Black | 000000 | 00000 |
| __ | 2.75 | Can | 15,000 | 15,000 | -30° to 750° | 4" | Paste | Black | 000000 | 00000 |
| __ | 10 | Can | 15,000 | 15,000 | -30° to 750° | 4" | Paste | Black | 000000 | 000000 |
Sealants | ||||||||||
| 4.4 | __ | Tube | 2,300 | 2,300 | Not Rated to 1100° | 2" | Paste | Black | 000000 | 00000 |
High-Temperature Thread Sealants
These sealants have high locking strength, so they work in demanding applications, such as securing mounting studs in motor housings. They also withstand applications with large temperature swings.
Heat cure sealant requires heat of at least 212° F to harden. Above 300° F, the sealant hardens in about 15 minutes. For temperatures below 300° F, it may take up to 4 hours to harden. It requires both heat and a hand tool to unthread.
1500° F max. temp. sealants are for use on cement-lined pipe joints prior to welding. The heat from the welding torch helps them begin to harden.
Container | Max. Pressure, psi | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | For Use On | Color | Each | |
Medium Locking Strength | ||||||||||||||
Heat Cure Loctite® Sealants | ||||||||||||||
| 5550 | 32 | Can | 10 sec. | 2 hrs. | 5,000 | 5,000 | -40° to 1500° | 6" | Paste | MIL-S-15204 | Aluminum, Brass, Bronze, Iron, Stainless Steel, Steel, Titanium, Cast Iron, Galvanized Iron, Galvanized Steel, Metal, Tin, Concrete | Brown | 00000000 | 0000000 |
Non-Hardening Thread Sealants with PTFE
PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.
Gasoila sealants are designed specifically to resist gasoline and fuel oils, making them best for motors, nozzles, pump assemblies, and fuel lines.
Sealants that meet NSF/ANSI 61 adhere to safety standards for drinking water systems.
VOC-free sealants won’t harm the environment and comply with LEED Green Building standards. VOC stands for volatile organic compound.
VOC regulations restrict sales of sealants that cannot be sold to the listed jurisdictions/areas.
Container | Max. Pressure, psi | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Cannot Be Sold To | Features | Each | |
Low Locking Strength | |||||||||||||
Loctite® Sealants | |||||||||||||
| 5113 | 16 | Brush-Top Can | Not Rated | Not Rated | -65° to 300° | 2" | Paste | __ | White | Los Angeles Area | __ | 0000000 | 000000 |
Gasoila Sealants | |||||||||||||
| GE04 | 4 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | UL Classified | Green | __ | __ | 00000000 | 00000 |
| GE08 | 8 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | UL Classified | Green | __ | __ | 00000000 | 00000 |
| GE16 | 16 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | UL Classified | Green | __ | __ | 00000000 | 00000 |
Vibra-Tite Sealants | |||||||||||||
| 480 | 4 | Brush-Top Can | 10,000 | 2,000 | -65° to 500° | 2" | Paste | __ | White | __ | __ | 00000000 | 00000 |
| 480 | 8 | Brush-Top Can | 10,000 | 2,000 | -65° to 500° | 2" | Paste | __ | White | __ | __ | 00000000 | 00000 |
| 480 | 16 | Brush-Top Can | 10,000 | 2,000 | -65° to 500° | 2" | Paste | __ | White | __ | __ | 00000000 | 00000 |
| 486 | 4 | Brush-Top Can | 150 | 100 | -55° to 300° | 2" | Paste | __ | White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | __ | 00000000 | 00000 |
| 486 | 8 | Brush-Top Can | 150 | 100 | -55° to 300° | 2" | Paste | __ | White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | __ | 00000000 | 00000 |
| 486 | 16 | Brush-Top Can | 150 | 100 | -55° to 300° | 2" | Paste | __ | White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | __ | 00000000 | 00000 |
Slic-Tite Sealants | |||||||||||||
| __ | 4 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | NSF/ANSI 61, UL Listed | White | __ | __ | 0000000 | 00000 |
| __ | 8 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | NSF/ANSI 61, UL Listed | White | __ | __ | 0000000 | 00000 |
| __ | 16 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | NSF/ANSI 61, UL Listed | White | __ | __ | 0000000 | 00000 |
| __ | 32 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | NSF/ANSI 61, UL Listed | White | __ | __ | 0000000 | 00000 |
Sealants | |||||||||||||
| __ | 0.125 | Tube | 10,000 | 3,000 | -100° to 600° | 2" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | __ | 00000000 | 0000 |
| __ | 2 | Tube | 10,000 | 3,000 | -100° to 600° | 3" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | __ | 0000000 | 0000 |
| __ | 4 | Brush-Top Can | 5,000 | 1,500 | -50° to 500° | 2" | Paste | NSF/ANSI 61 | Blue | __ | __ | 00000000 | 00000 |
| __ | 4 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 3" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | __ | 0000000 | 00000 |
| __ | 4 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | C-UL Classified, NSF/ANSI 61, UL Classified | Off-White | __ | VOC Free | 00000000 | 00000 |
| __ | 8 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 3" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | __ | 0000000 | 00000 |
| __ | 8 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | C-UL Classified, NSF/ANSI 61, UL Classified | Off-White | __ | VOC Free | 00000000 | 00000 |
| __ | 16 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | __ | 00000000 | 00000 |
| __ | 16 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | C-UL Classified, NSF/ANSI 61, UL Classified | Off-White | __ | VOC Free | 00000000 | 00000 |
| __ | 32 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | __ | 00000000 | 00000 |
| __ | 32 | Brush-Top Can | 10,000 | 3,000 | -50° to 500° | 2" | Paste | C-UL Classified, NSF/ANSI 61, UL Classified | Off-White | __ | VOC Free | 00000000 | 00000 |
Thread Sealants with PTFE
PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.
Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.
To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
Container | Max. Pressure, psi | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Each | |
Low Locking Strength | |||||||||||||
Loctite® Sealants | |||||||||||||
| 565 | 0.2 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Paste | NSF/ANSI 61, UL Listed | White | 00000000 | 00000 |
| 565 | 1.7 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Paste | NSF/ANSI 61, UL Listed | White | 0000000 | 00000 |
| 565 | 8.4 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Paste | NSF/ANSI 61, UL Listed | White | 00000000 | 00000 |
| 565 | 10.1 | Cartridge | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Paste | NSF/ANSI 61, UL Listed | White | 0000000 | 00000 |
| 565 | 33.8 | Bottle | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 2" | Paste | NSF/ANSI 61, UL Listed | White | 0000000 | 000000 |
| 567 | 0.2 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 400° | 3" | Paste | NSF/ANSI 61, UL Listed | White | 00000000 | 0000 |
| 567 | 1.7 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 400° | 3" | Paste | NSF/ANSI 61, UL Listed | White | 00000000 | 00000 |
| 567 | 8.4 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 400° | 3" | Paste | NSF/ANSI 61, UL Listed | White | 00000000 | 00000 |
| 567 | 11.8 | Brush-Top Can | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 400° | 3" | Paste | NSF/ANSI 61, UL Listed | White | 0000000 | 000000 |
| 567 | 33.8 | Bottle | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 400° | 3" | Paste | NSF/ANSI 61, UL Listed | White | 0000000 | 000000 |
Vibra-Tite Sealants | |||||||||||||
| 420 | 1.7 | Tube | 60 min. | 72 hrs. | 10,000 | 10,000 | -55° to 300° | 6" | Paste | __ | White | 000000000 | 00000 |
| 420 | 8.4 | Tube | 60 min. | 72 hrs. | 10,000 | 10,000 | -55° to 300° | 6" | Paste | __ | White | 000000000 | 00000 |
| 460 | 0.2 | Tube | 60 min. | 24 hrs. | 10,000 | 10,000 | -65° to 400° | 6" | Paste | __ | White | 000000000 | 0000 |
| 460 | 1.7 | Tube | 60 min. | 24 hrs. | 10,000 | 10,000 | -65° to 400° | 6" | Paste | __ | White | 000000000 | 00000 |
| 460 | 8.4 | Tube | 60 min. | 24 hrs. | 10,000 | 10,000 | -65° to 400° | 6" | Paste | __ | White | 000000000 | 00000 |
Sealants | |||||||||||||
| __ | 1.7 | Tube | 2 hrs. | 24 hrs. | 10,000 | 10,000 | -55° to 375° | 3" | Paste | UL Listed | Off-White | 00000000 | 00000 |
| __ | 8.4 | Tube | 2 hrs. | 24 hrs. | 10,000 | 10,000 | -55° to 375° | 3" | Paste | UL Listed | Off-White | 00000000 | 00000 |
Medium Locking Strength | |||||||||||||
Loctite® Sealants | |||||||||||||
| 577 | 1.7 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 3 1/8" | Paste | __ | Yellow | 00000000 | 00000 |
| 577 | 8.5 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 3 1/8" | Paste | __ | Yellow | 0000000 | 00000 |
| 592 | 0.2 | Tube | 24 hrs. | 72 hrs. | 10,000 | 10,000 | -65° to 400° | 3/8" | Paste | __ | White | 00000000 | 0000 |
| 592 | 1.7 | Tube | 24 hrs. | 72 hrs. | 10,000 | 10,000 | -65° to 400° | 3/8" | Paste | __ | White | 00000000 | 00000 |
| 592 | 8.4 | Tube | 24 hrs. | 72 hrs. | 10,000 | 10,000 | -65° to 400° | 3/8" | Paste | __ | White | 00000000 | 00000 |
Vibra-Tite Sealants | |||||||||||||
| 427 | 1.7 | Tube | 90 min. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 6" | Paste | __ | Yellow | 000000000 | 00000 |
| 427 | 8.4 | Tube | 90 min. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 6" | Paste | __ | Yellow | 000000000 | 00000 |
Non-Hardening Thread Sealants
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. Formulated without PTFE, these sealants are less slippery and less likely to result in overtightenting than sealants that have PTFE, making them good for plastic pipe where overtightening could lead to cracks and breaks. They have low locking strength, so they can be adjusted without tools.
To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
Sealants that cannot be sold to the listed regions are restricted due to local VOC (Volatile Organic Compounds) regulations.
Container | Max. Pressure, psi | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | For Fluids | For Gases | Minimum Temp., °F | Maximum Temp., °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Cannot Be Sold To | Each | |
Low Locking Strength | |||||||||||||
Loctite® Sealants | |||||||||||||
| 5438 | 16 fl. oz. | Brush-Top Can | 10,000 | 10,000 | -65° | 300° | 2" | Paste | __ | White | __ | 0000000 | 000000 |
Vibra-Tite Sealants | |||||||||||||
| 481 | 2.4 fl. oz. | Tube | 150 | 100 | -65° | 500° | 2" | Paste | __ | Off-White | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, Northern VA | 00000000 | 00000 |
Sealants | |||||||||||||
| __ | 2 fl. oz. | Brush-Top Bottle | 10,000 | 300 | -65° | 450° | 2" | Paste | MIL-S-15204, UL Recognized Component | Gray | __ | 0000000 | 00000 |
| __ | 4 fl. oz. | Brush-Top Can | 5,000 | 2,600 | Not Rated | 400° | 6" | Paste | __ | Gray | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, Northern VA | 00000000 | 00000 |
| __ | 4 fl. oz. | Brush-Top Can | 6,000 | 3,000 | -100° | 600° | 2" | Paste | NSF/ANSI 61 | Blue | __ | 00000000 | 00000 |
| __ | 8 fl. oz. | Brush-Top Can | 6,000 | 3,000 | -100° | 600° | 2" | Paste | NSF/ANSI 61 | Blue | __ | 000000 | 00000 |
| __ | 8 fl. oz. | Brush-Top Can | 10,000 | 300 | -65° | 450° | 2" | Paste | MIL-S-15204, UL Recognized Component | Gray | __ | 0000000 | 00000 |
| __ | 16 fl. oz. | Brush-Top Can | 6,000 | 3,000 | -100° | 600° | 2" | Paste | NSF/ANSI 61 | Blue | __ | 00000000 | 00000 |
| __ | 32 fl. oz. | Brush-Top Can | 6,000 | 3,000 | -100° | 600° | 2" | Paste | NSF/ANSI 61 | Blue | __ | 00000000 | 00000 |
Thread Sealants
These thread sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools. Those that are VOC-free won’t harm the environment and comply with LEED Green Building standards. VOC stands for volatile organic compound.
Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.
To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
Container | Max. Pressure, psi | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Features | Color | Each | |
Low Locking Strength | ||||||||||||||
Loctite® Sealants | ||||||||||||||
| 564 | 1.7 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 3/8" | Paste | __ | __ | Off-White | 0000000 | 000000 |
| 564 | 8.5 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | Not Rated to 300° | 3/8" | Paste | __ | __ | Off-White | 0000000 | 000000 |
| 572 | 1.7 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -55° to 300° | 3 1/8" | Paste | __ | __ | Off-White | 0000000 | 00000 |
Sealants | ||||||||||||||
| __ | 8 | Brush-Top Can | 1 sec. | 1 sec. | 500 | 350 | -50° to 350° | 6" | Paste | __ | VOC Free | Gray | 000000000 | 0000 |
Medium Locking Strength | ||||||||||||||
Loctite® Sealants | ||||||||||||||
| 580 | 1.7 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 300° | 3/8" | Paste | __ | __ | White | 00000000 | 00000 |
| 5770 | 1.7 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 530° | 3/8" | Paste | __ | __ | Off-White | 00000000 | 00000 |
| 5770 | 8.4 | Tube | 10 sec. | 24 hrs. | 10,000 | 10,000 | -65° to 530° | 3/8" | Paste | __ | __ | Off-White | 00000000 | 000000 |
Sealants | ||||||||||||||
| __ | 1.7 | Tube | 10 min. | 24 hrs. | 10,000 | 300 | -65° to 400° | 2" | Paste | MIL-S-15204, NSF/ANSI 61, UL Listed | __ | White | 00000000 | 00000 |
| __ | 8.4 | Tube | 10 min. | 24 hrs. | 10,000 | 300 | -65° to 400° | 2" | Paste | MIL-S-15204, NSF/ANSI 61, UL Listed | __ | White | 00000000 | 00000 |
Thread Sealants for Oxygen Systems
Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants are non-hardening, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.
The sealant in a tube is a good alternative to thread sealant tape—like tape, it forms PTFE strings between tightened threads, but excess material liquefies, so it won’t clog system components downstream.
Thread Sealants for Hydraulic and Compressed Air Systems
Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air. These sealants have medium locking strength, which prevents threads from loosening due to vibration and shock. They require a hand tool to unthread.
Container | Max. Pressure, psi | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Each | |
Sealants | ||||||||||||
| 1.7 | Tube | 60 min. | 24 hrs. | 10,000 | 300 | -65° to 400° | 2" | Paste | MIL-S-15204, UL Listed | White | 00000000 | 000000 |
| 8.4 | Tube | 60 min. | 24 hrs. | 10,000 | 300 | -65° to 400° | 2" | Paste | MIL-S-15204, UL Listed | White | 00000000 | 00000 |