Filter by
For Use With
For Use On
Maximum Temperature
Maximum Pressure for Gases
Maximum Pressure for Fluids
Environment
Cure Type
Minimum Temperature
Mixing Required
Maximum Pressure
Food Industry Standard
Consistency
Certification
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Manufacturer
High-Density Thread Sealant Tape
 |
This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.
Max. Pressure, psi | Each | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., yd. | Density, g/cm³ | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Food Industry Std. | Certification | Mil. Spec. | Color | 1-11 | 12-Up | |||
PTFE | |||||||||||||||
0.0032" Thick | |||||||||||||||
| 1/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1/2" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A11 | 00000 | 00000 | ||
| 1/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1/2" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K22 | 0000 | 0000 | ||
| 3/8" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3/4" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A16 | 0000 | 0000 | ||
| 3/8" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3/4" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K19 | 0000 | 0000 | ||
| 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A12 | 0000 | 0000 | ||
| 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K33 | 0000 | 0000 | ||
| 3/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A13 | 0000 | 0000 | ||
| 3/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K44 | 0000 | 0000 | ||
| 1" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 2" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A14 | 0000 | 0000 | ||
| 1" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 2" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K55 | 00000 | 0000 | ||
| 1 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3" | — | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Gray | 7346A15 | 00000 | 00000 | ||
| 1 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K66 | 00000 | 00000 | ||
| 2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 4" | FDA Compliant 21 CFR 177.1550 | C-UL Listed Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K77 | 00000 | 00000 | ||
0.0035" Thick | |||||||||||||||
| 1/4" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K81 | 00000 | 0000 | ||
| 3/8" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K82 | 00000 | 00000 | ||
| 1/2" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K83 | 00000 | 00000 | ||
| 3/4" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K84 | 00000 | 00000 | ||
| 1" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K85 | 00000 | 00000 | ||
| 1 1/2" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K86 | 00000 | 00000 | ||
| 2" | 14 | 1.9 | 10,000 | 10,800 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | White | 6802K87 | 00000 | 00000 | ||
Nickel-Filled PTFE | |||||||||||||||
0.0035" Thick | |||||||||||||||
| 1/4" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 1/2" | — | C-UL Listed UL Listed | — | Gray | 7346A211 | 00000 | 00000 | ||
| 3/8" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 3/4" | — | C-UL Listed UL Listed | — | Gray | 7346A212 | 00000 | 00000 | ||
| 1/2" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 1" | — | C-UL Listed UL Listed | — | Gray | 7346A213 | 00000 | 00000 | ||
| 3/4" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | — | C-UL Listed UL Listed | — | Gray | 7346A214 | 00000 | 00000 | ||
| 1" | 14 | 1.4 | 10,000 | 10,000 | -450 to 550 | 2" | — | C-UL Listed UL Listed | — | Gray | 7346A215 | 00000 | 00000 | ||
0.0040" Thick | |||||||||||||||
| 1/4" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K88 | 00000 | 00000 | ||
| 3/8" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K89 | 00000 | 00000 | ||
| 1/2" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K91 | 00000 | 00000 | ||
| 3/4" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K92 | 00000 | 00000 | ||
| 1" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K93 | 00000 | 00000 | ||
| 2" | 14 | 1.9 | 10,500 | 11,500 | -450 to 550 | 6" | FDA Compliant 21 CFR 175.105 FDA Compliant 21 CFR 177.2600 | UL Listed | — | White | 6802K95 | 00000 | 00000 | ||
Non-Hardening Thread Sealants with PTFE
 |  |
Applicator-Top Can | Tube |
PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.
Cannot Be Sold To—VOC regulations restrict sales of sealants that cannot be sold to the listed jurisdictions/areas.
Container | Max. Pressure, psi | Temp., ° F | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | For Fluids | For Gases | Min. | Max. | For Max. Thread Dia. | Consistency | Certification | Color | Cannot Be Sold To | Each | |||
Low Locking Strength | |||||||||||||||
Loctite® | |||||||||||||||
| 5113 | 16 | Applicator-Top Can | Not Rated | Not Rated | -65 | 300 | 2" | Paste | — | White | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; Ventura County, CA | 8149K22 | 000000 | ||
Other Thread Sealants | |||||||||||||||
| — | 2 | Tube | 10,000 | 3,000 | -100 | 600 | 3" | Paste | CSA Certified CSA-US Certified UL Classified | Blue | — | 5477K18 | 0000 | ||
| — | 4 | Applicator-Top Can | 10,000 | 3,000 | -100 | 600 | 3" | Paste | CSA Certified CSA-US Certified UL Classified | Blue | — | 5477K19 | 0000 | ||
| — | 8 | Applicator-Top Can | 10,000 | 3,000 | -100 | 600 | 3" | Paste | CSA Certified CSA-US Certified UL Classified | Blue | — | 5477K21 | 00000 | ||
Thread Sealants for Oxygen Systems
|  |
Tube | Jar |
Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants are non-hardening, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.
Tube—The sealant in a tube is a good alternative to thread sealant tape—like tape, it forms PTFE strings between tightened threads, but excess material liquefies, so it won’t clog system components downstream.
Container | Max. Pressure, psi | Temp., ° F | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | For Fluids | For Gases | Min. | Max. | Max. Temp. for Oxygen, ° F | For Max. Thread Dia. | Consistency | Certification | Mil. Spec. | Color | Each | |||
Low Locking Strength | |||||||||||||||
| 3.5 | Tube | 10,000 | 10,000 | -400 | 500 | 140 | 6" | Paste | — | — | White | 4538K1 | 000000 | ||
| 3.5 | Jar | 10,000 | 10,000 | -450 | 550 | 140 | 6" | Paste | Mil. Spec. | MIL-PRF-27617 | Green | 4538K6 | 000000 | ||
Non-Hardening High-Temperature Thread Sealants
|  | |
Applicator-Top Can | Can | Tube |
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.
Container | Max. Pressure, psi | Temp., ° F | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Net Wt., lb. | Type | For Fluids | For Gases | Min. | Max. | For Max. Thread Dia. | Consistency | Color | Each | |||
Low Locking Strength | |||||||||||||
Key Graphite | |||||||||||||
| — | 0.625 | Applicator-Top Can | 15,000 | 15,000 | -30 | 750 | 4" | Paste | Black | 4586K8 | 000000 | ||
| — | 1 | Can | 15,000 | 15,000 | -30 | 750 | 4" | Paste | Black | 4586K5 | 00000 | ||
| — | 2.75 | Can | 15,000 | 15,000 | -30 | 750 | 4" | Paste | Black | 4586K6 | 000000 | ||
| — | 10 | Can | 15,000 | 15,000 | -30 | 750 | 4" | Paste | Black | 4586K7 | 000000 | ||
Other Thread Sealants | |||||||||||||
| 4.4 | — | Tube | 2,300 | 2,300 | Not Rated | 1,100 | 2" | Paste | Black | 1965K1 | 00000 | ||
Thread Sealants for Hydraulic and Compressed Air Systems
|  |
Tube | Bottle |
Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Medium Locking Strength—These sealants have medium locking strength, which prevents threads from loosening due to vibration and shock. They require a hand tool to unthread.
Container | Max. Pressure, psi | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength, hr. | For Fluids | For Gases | Min. | Max. | For Max. Thread Dia. | Consistency | Certification | Mil. Spec. | Color | Each | |||
Medium Locking Strength | |||||||||||||||||
Vibra-Tite | |||||||||||||||||
| 440 | 0.3 | Bottle | 4 hr. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K701 | 00000 | ||
| 440 | 1.7 | Bottle | 4 hr. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K703 | 00000 | ||
| 440 | 8.4 | Bottle | 4 hr. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K702 | 00000 | ||
| 442 | 1.7 | Tube | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K705 | 00000 | ||
| 442 | 8.4 | Tube | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thick Liquid | — | — | Purple | 45855K704 | 00000 | ||
| 444 | 0.3 | Bottle | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thin Liquid | — | — | Brown | 45855K706 | 0000 | ||
| 444 | 1.7 | Bottle | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thin Liquid | — | — | Brown | 45855K708 | 00000 | ||
| 444 | 8.4 | Bottle | 60 min. | 24 | 10,000 | 10,000 | -65 | 300 | 2" | Thin Liquid | — | — | Brown | 45855K707 | 00000 | ||
Other Thread Sealants | |||||||||||||||||
| — | 1.7 | Tube | 60 min. | 24 | 10,000 | 300 | -65 | 400 | 2" | Paste | Mil. Spec. UL Listed | MIL-S-15204 | White | 45855K84 | 00000 | ||
| — | 8.4 | Tube | 60 min. | 24 | 10,000 | 300 | -65 | 400 | 2" | Paste | Mil. Spec. UL Listed | MIL-S-15204 | White | 45855K85 | 00000 | ||
Reusable Non-Hardening Thread Sealants for Coarse Threads
 |
Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.
Reusable Non-Hardening Thread Sealants for Fine Threads
 |
Formulated to flow into small spaces, use these sealants between fine threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.
Thread Sealants
 | |
Applicator-Top Can | Tube |
These thread sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Low Locking Strength—Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.
Medium Locking Strength—Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.
NSF/ANSI 61—To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
VOC-Free—Sealants that are VOC-free won’t harm the environment and comply with LEED Green Building standards. VOC stands for volatile organic compound.
Container | Max. Pressure, psi | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | For Fluids | For Gases | Min. | Max. | For Max. Thread Dia. | Consistency | Food Industry Std. | Certification | Mil. Spec. | Color | Features | Each | |||
Low Locking Strength | ||||||||||||||||||
| 8 | Applicator-Top Can | 1 sec. | 1 sec. | 500 | 350 | -50 | 350 | 6" | Paste | — | — | — | Gray | VOC-Free | 45855K801 | 00000 | ||
Medium Locking Strength | ||||||||||||||||||
| 1.7 | Tube | 10 min. | 24 hr. | 10,000 | 300 | -65 | 400 | 2" | Paste | NSF/ANSI 61 | Mil. Spec. UL Listed | MIL-S-15204 | White | — | 45855K86 | 00000 | ||
| 8.4 | Tube | 10 min. | 24 hr. | 10,000 | 300 | -65 | 400 | 2" | Paste | NSF/ANSI 61 | Mil. Spec. UL Listed | MIL-S-15204 | White | — | 45855K87 | 00000 | ||
Non-Hardening Thread Sealants
|  |
Applicator-Top Can | Applicator-Top Bottle |
Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. Formulated without PTFE, these sealants are less slippery and less likely to result in overtightenting than sealants that have PTFE, making them good for plastic pipe where overtightening could lead to cracks and breaks. They have low locking strength, so they can be adjusted without tools.
Cannot Be Sold To—Sealants that cannot be sold to the listed regions are restricted due to local VOC (Volatile Organic Compounds) regulations.
Container | Max. Pressure, psi | Temp., ° F | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | For Fluids | For Gases | Min. | Max. | For Max. Thread Dia. | Consistency | Certification | Mil. Spec. | Color | Cannot Be Sold To | Each | |||
Low Locking Strength | |||||||||||||||
| 2 | Applicator-Top Bottle | 10,000 | 300 | -65 | 450 | 2" | Paste | Mil. Spec. UL Recognized Component | MIL-S-15204 | Gray | — | 4586K11 | 000000 | ||
| 4 | Applicator-Top Can | 5,000 | 2,600 | Not Rated | 400 | 6" | Paste | — | — | Gray | Alexandria, VA; Arlington County, VA; Colorado; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Illinois; Indiana; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; Michigan; New Hampshire; New Jersey; New York; Ohio; Pennsylvania; Prince William County, VA; Rhode Island; Stafford County, VA; Utah | 4586K205 | 00000 | ||
| 8 | Applicator-Top Can | 10,000 | 300 | -65 | 450 | 2" | Paste | Mil. Spec. UL Recognized Component | MIL-S-15204 | Gray | — | 4586K12 | 00000 | ||
Thread Sealant Tape
 |
Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.
ePTFE with Graphite—ePTFE tape with graphite creates a better seal between threads than plain PTFE tape, which helps prevent fluid and gas leaks. The graphite attaches to the PTFE, so this tape does not emit harmful VOCs.
Max. Pressure, psi | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., yd. | Density, g/cm³ | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Food Industry Std. | Certification | Mil. Spec. | Color | Each | |||
PTFE | ||||||||||||||
0.0025" Thick | ||||||||||||||
| 1/4" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1/2" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K11 | 00000 | ||
| 3/8" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K18 | 0000 | ||
| 1/2" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K12 | 0000 | ||
| 3/4" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K13 | 0000 | ||
| 1" | 16 | 0.55 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | FDA Compliant 21 CFR 177.1550 | UL Listed | — | White | 4591K14 | 0000 | ||
0.0032" Thick | ||||||||||||||
| 1/4" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 1/2" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K11 | 0000 | ||
| 3/8" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 3/4" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K18 | 0000 | ||
| 1/2" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 1" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K12 | 0000 | ||
| 3/4" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K13 | 0000 | ||
| 1" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 2" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K14 | 0000 | ||
| 1 1/2" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 3" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K15 | 0000 | ||
| 2" | 14 | 0.7 | 10,000 | 10,000 | -450 to 550 | 4" | FDA Compliant 21 CFR 177.1550 | Mil. Spec. UL Listed | MIL-T-27730 | White | 6802K16 | 00000 | ||
0.0035" Thick | ||||||||||||||
| 1/2" | 39 | 0.8 | 10,000 | 10,000 | -450 to 500 | 2" | — | C-UL Listed UL Listed | — | Blue | 4934A15 | 0000 | ||
| 3/4" | 39 | 0.8 | 10,000 | 10,000 | -450 to 500 | 2" | — | C-UL Listed UL Listed | — | Blue | 4934A16 | 0000 | ||
| 1" | 39 | 0.8 | 10,000 | 10,000 | -450 to 500 | 2" | — | C-UL Listed UL Listed | — | Blue | 4934A17 | 00000 | ||
| 2" | 39 | 0.8 | 10,000 | 10,000 | -450 to 500 | 2" | — | C-UL Listed UL Listed | — | Blue | 4934A18 | 00000 | ||
ePTFE with Graphite | ||||||||||||||
0.0020" Thick | ||||||||||||||
| 5/8" | 27 | 0.8 | 2,900 | 2,900 | -400 to 500 | 1 1/4" | — | — | — | Gray | 6802K25 | 00000 | ||
Thread Sealant Tape for Stainless Steel Threads
|
This tape is thicker to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.
Max. Pressure, psi | Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., ft. | Density, g/cm³ | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Certification | Mil. Spec. | Color | 1-11 | 12-Up | |||
PTFE | ||||||||||||||
0.0043" Thick | ||||||||||||||
| 1/4" | 43 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N11 | 00000 | 00000 | ||
| 3/8" | 43 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N12 | 0000 | 0000 | ||
| 1/2" | 21 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N17 | 0000 | 0000 | ||
| 1/2" | 50 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N13 | 00000 | 00000 | ||
| 3/4" | 21 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N14 | 0000 | 0000 | ||
| 1" | 21 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N18 | 0000 | 0000 | ||
| 1" | 43 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N15 | 00000 | 00000 | ||
| 1 1/2" | 43 | 1.05 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | MIL-T-27730 | Gray | 1726N16 | 00000 | 00000 | ||
Choose-a-Color High-Density Thread Sealant Tape
|
Use color to identify water, gas, and chemical connections. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.
Green—Green tape is often used for oxygen.
Orange and Yellow—Orange and yellow tape is commonly used to indicate fuel and gas.
Red—Red tape is often used for water.
Max. Pressure, psi | Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., yd. | Density, g/cm³ | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Certification | Mil. Spec. | Choose a Color | 1-11 | 12-Up | |||
PTFE | ||||||||||||||
0.0032" Thick | ||||||||||||||
| 1/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1/2" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K11 | 00000 | 00000 | ||
| 3/8" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3/4" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K17 | 0000 | 0000 | ||
| 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K12 | 0000 | 0000 | ||
| 3/4" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 1 1/2" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K13 | 0000 | 0000 | ||
| 1" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 2" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K14 | 00000 | 0000 | ||
| 1 1/2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 3" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K15 | 00000 | 00000 | ||
| 2" | 14 | 1.2 | 10,000 | 10,000 | -450 to 550 | 4" | Mil. Spec. UL Listed | Fed. Spec. A-A-58092 Type II MIL-T-27730 | Green, Orange, Red, Yellow | 44945K16 | 00000 | 00000 | ||
Thread Sealants with PTFE
|
Tube |
PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.
Low Locking Strength—Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.
Container | Max. Pressure, psi | Temp., ° F | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, hr. | Reaches Full Strength, hr. | For Fluids | For Gases | Min. | Max. | For Max. Thread Dia. | Consistency | Certification | Color | Each | |||
Low Locking Strength | |||||||||||||||
| 1.7 | Tube | 2 | 24 | 10,000 | 10,000 | -55 | 375 | 3" | Paste | UL Listed | Off-White | 45855K88 | 000000 | ||
| 8.4 | Tube | 2 | 24 | 10,000 | 10,000 | -55 | 375 | 3" | Paste | UL Listed | Off-White | 45855K89 | 00000 | ||
Drip-Free Non-Hardening Thread Sealants with PTFE
 |
Apply these thread sealant sticks without a mess. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.
Container | Max. Pressure, psi | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Net Wt., oz. | Type | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Consistency | Food Industry Std. | Certification | Environment | Color | Each | |||
Low Locking Strength | ||||||||||||||
Slic-Tite | ||||||||||||||
| 1.2 | Stick | 5,000 | 500 | -50 to 350 | 2" | Semi-Solid | NSF/ANSI 61 | — | Food and Beverage, Outdoor | White | 5477K11 | 000000 | ||
Other Thread Sealants | ||||||||||||||
| 1.3 | Stick | 2,000 | 350 | -50 to 350 | 2" | Semi-Solid | NSF/ANSI 61 | UL Listed | Food and Beverage, Outdoor | Off-White | 4592K34 | 0000 | ||
| 4 | Stick | 2,000 | 350 | -50 to 350 | 2" | Semi-Solid | NSF/ANSI 61 | UL Listed | Food and Beverage, Outdoor | Off-White | 4592K11 | 0000 | ||
Thread Sealant Tape for Copper, Brass, and Bronze Threads
 |
With 10% copper flake content, this tape matches the color of copper, brass, and bronze threads for a seamless finish. It’s made of PTFE, so it has a slippery surface to keep threads from binding. This tape has a higher density than standard tape for a better seal between threads.
Max. Pressure, psi | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., ft. | Density, g/cm³ | For Fluids | For Gases | Temp. Range, ° F | For Max. Thread Dia. | Certification | Mil. Spec. | Color | Each | |||
Copper-Filled PTFE | |||||||||||||
0.0045" Thick | |||||||||||||
| 1/2" | 50 | 1.6 | 10,000 | 300 | -450 to 500 | 1 1/2" | Mil. Spec. | MIL-T-27730 | Copper | 4840N11 | 000000 | ||
| 3/4" | 50 | 1.6 | 10,000 | 300 | -450 to 500 | 4" | Mil. Spec. | MIL-T-27730 | Copper | 4840N12 | 00000 | ||
