M36 Threaded Inserts | McMaster-Carr

Filter by

System of Measurement

Threaded Insert Type

Thread Pitch

For Tap Type

Helical Insert Type

Installed Length

For Tap Thread Size

Thread Direction

For Use In

Drill Bit Size

Material

For Tap Thread Pitch

Specifications Met

Thread Type

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Profile

End Type

REACH

RoHS

Compliant with Exemptions

DFARS Specialty Metals

Compliant

Exempt

Export Control Classification Number (ECCN)

Thread Spacing

Sold As

For Material Thickness

Hole Diameter

10 Products

Thread-Locking Threaded Inserts

With Loctite® adhesive already on the threads, these inserts won’t back out or vibrate loose. The adhesive reaches full strength after 72 hours. Unlike helical inserts, you can install them with a standard drill and tap. However, thread-locking inserts are difficult to remove and reuse.

After drilling and tapping your hole, install inserts with a wrench or an installation bit. To use a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into the hole. For slotted inserts, you can drive with a slotted screwdriver instead.

Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.

Black Phosphate-Coated Steel—These inserts resist occasional moisture.

	Inserts									Installation Tools
	Thread Size	For Tap Thread Size	Installed Lg., mm	Drill Bit Size, mm	For Max. Hole Dia., mm	Drive Style	Pkg. Qty.		Pkg.		Each
Standard Wall







				Black Phosphate-Coated Steel

				M20 x 2.5 mm	M36 x 4 mm	30	33	33	Slotted	1	000000000	000000	000000000	000000


				M24 x 3 mm	M36 x 4 mm	30	33	33	Slotted	1	000000000	00000	000000000	00000

Helical Threaded Insert Removal Tools

To remove installed helical inserts, place the tip of these tools into the insert and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.

Narrow Profile—The tip of these tools has a narrower angle than standard removal tools to reduce the chance it will dig into your material’s surface when you strike the tool.

	Mfr.		Each
Standard Profile



	7/8"-9, 7/8"-14, 1"-8, 1"-12, 1"-14, 1 1/8"-7, 1 1/8"-12, 1 1/4"-7, 1 1/4"-12, 1 3/8"-6, 1 3/8"-12, 1 1/2"-6, 1 1/2"-12, M20, M22, M24, M26, M27, M30, M33, M36, M39	—	000000000	000000


	Narrow Profile



			1 1/8"-7, 1 1/8"-12, 1 1/4"-7, 1 1/4"-8, 1 1/4"-12, 1 3/8"-6, 1 3/8"-12, 1 1/2"-6, 1 1/2"-8, 1 1/2"-12, M27, M30, M36, M39	Heli-Coil	000000000	000000

Helical Threaded Inserts

Pronged

Restore, reinforce, or create metal threads. The tough coils on these inserts expand once installed to anchor in a tapped hole. Also known as Heli-Coil inserts, they're often used in engine heads and machinery housings where strong connections are critical. Unlike threadlocking inserts, you can remove and reuse them without them losing their strength.

Installation requires a drill bit, a helical insert tap, and an installation tool. Easy-start installation tools compress the diameter of your insert so it fits easily into a tapped hole. These tools are the best choice for preventing misaligned or damaged threads—just make sure you have space to turn the crank.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	Inserts								Through-Hole Taps		Closed-End Hole Taps		Installation Tools		Inserts with Installation Tools
	Thread Size	Installed Lg., mm	Drill Bit Size	For Max. Hole Dia., mm	Specs. Met	Pkg. Qty.		Pkg.		Each		Each		Each	No. of Inserts Included		Each
Pronged







				18-8 Stainless Steel

				M36 x 4 mm	54	1 15/32"	36.1	SAE MA3279-187	1	000000000	000000	000000000	0000000	000000000	0000000	000000000	000000	4	000000000	0000000

Extraction Tools

Remove installed helical inserts.

For Pronged Helical Inserts—Place the tip into pronged inserts and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.

		Each
For Pronged Helical Inserts



	1 1/8"-7, 1 1/8"-12, 1 1/4"-7, 1 1/4"-8, 1 1/4"-12, 1 3/8"-6, 1 3/8"-12, 1 1/2"-6, 1 1/2"-8, 1 1/2"-12, M27, M30, M36, M39	000000000	0000000

Helical Threaded Inserts with Installation Tools

Installation Tool and

Through-Hole Tap

Quickly restore stripped threads—these inserts come with through-hole taps and installation tools.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	For Max. Hole Dia.	No. of Inserts Included	Includes		Each
Pronged







	18-8 Stainless Steel

	M36 x 4 mm	54	1 7/16"	1.438"	4	Installation Tool Through-Hole Tap	000000000	0000000

Helical Threaded Insert Installation and Prong Break-Off Tools

T-Handle

Install helical inserts and break off prongs with one tool and a hammer strike. These tools have a slot that grips your insert’s prong for turning both left- and right-hand threads. Slide an insert onto these tools and drive them a quarter-turn to half-turn below the material’s surface. Then, strike the end of the tool with a hammer to break off the prong. These tools work with pronged helical inserts.

	Handle Style		Each
Metric Thread



	M36 × 4 mm	T-Handle	000000000	000000