These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Often used in hard-to-access areas, these flowmeter/totalizers have a display that can be placed up to 25 feet from the sensor. They connect to unthreaded PVC pipe.

Easy to remove for cleaning and maintenance, these flowmeter/totalizers connect to sanitary quick-clamp fittings (often called tri-clamp fittings) and measure the flow rate and volume of liquid passing through your system.

Using the flanged ends, securely install these flowmeter/totalizers in large, high-flow pipelines to measure the flow rate and total volume of liquid flowing through.

Often used to find worn components or leaks, these flowmeters have a valve, so you can test the flow of oil from pumps and other equipment at different pressures.

To prevent contaminating your oxygen line, these flowmeters are specially cleaned and bagged.

Instead of a scale, these flowmeters have a large dial that makes it easy to read the flow rate of your gas from a distance.

A case protects these flowmeters from blows and other impact as they measure the flow rate of gas. Install them in instrument panels using the fittings on the back.

No need to disassemble your PVC pipeline—insert these flowmeters into a drilled hole and secure them using the included clamps.

Easily install the unthreaded ends of these flowmeters into a PVC piping system.

Monitor the flow rate of liquids and use the integrated switch to turn equipment on and off, or activate an alarm when liquid reaches a set flow rate.

Install these flowmeters in an instrument panel where they might be exposed to blows and other impact.

Check the flow rate of liquids up to 200° F from an easy-to-read digital display instead of a scale or dial.

Liquids with particles up to 1/8" in diameter won't clog this flowmeter.

A 304 stainless steel case protects these flowmeters from blows that could shatter the glass body.

Install these flowmeters securely into large pipelines with the flanged ends.