Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

These inserts are the most corrosion-resistant thread-locking inserts we offer.

A closed-end tap, drill bit, and installation bit are included with these inserts.

Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

A distorted thread grips the screw to resist loosening.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.

A dry film keeps the screw from sticking or binding in these inserts during installation.

These kits have short-, normal-, and long-reach inserts, an installation tool, and a tap.

Made of 18-8 stainless steel, these inserts have good corrosion resistance.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

Made from brass, these inserts are nonmagnetic, corrosion resistant, and electrically conductive.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

Use these inserts to install fine-thread screws in existing holes.

70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.

Install these inserts into plastic parts to create a secure base for fasteners.

The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.

The flange keeps these inserts from being pulled through a hole and provides a load bearing surface.

Assortments include various sizes of tapping inserts for softwood.

Steel inserts have high strength for durability.

Steel inserts have high strength for durability.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

Fewer prongs than other tee nut inserts reduce the risk of splitting hardwood—these inserts have three short prongs.

Use where vibration is a concern—these tee nut inserts have distorted threads that lock screws in place.

A closed end seals out elements and protects the threads on these inserts from debris.

Mount these inserts flush or below the material's surface.

Press these inserts into a drilled hole and the flexible metal teeth anchor them in the material. Use them with carbon fiber, fiberglass, and garolite.

Choose these standoffs for their adherence to NAS 1831 specifications.

These standoffs are made to NAS specifications.

Protect components from electrical charges.

A nickel-chrome plating gives these standoffs a mirror-like finish.

A recess under the hex clinches a panel for a strong hold that won't push, pull, or twist out. When mounted with a lever press, the hex sits flush with the surface and the open end creates a through hole.

These standoffs are designed to fit in the limited space of compact electronics such as laptops and hand-held devices.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 18-8 stainless steel, they are chemical resistant.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.

Use these hex drive screws and binding barrels as a low-profile alternative to standard nut and bolt combinations.

Stainless steel binding barrels and screws have excellent corrosion resistance in most environments.

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

An unthreaded barrel allows quick assembly with a press or a hammer.

Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.

These binding barrels and screws have good chemical resistance.

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

Install these binding barrels and screws with a standard slotted screwdriver. They require a special tool to remove.

Connect two differently sized male-threaded parts, such as threaded rods, and tighten with a standard wrench.

Increase or decrease metric thread size from one male-threaded part to another. Commonly used to connect two differently sized threaded rods, they have a hex-shaped body, so you can tighten them with a standard wrench.

Change thread sizes or types, such as fine to coarse threads, on parts without changing gender.

Change inch threads to metric with these adapters, or swap metric threads for inch. An external hex lets you tighten or loosen them with a wrench.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

Wedges under the flange lock the nut in place in soft materials such as brass and aluminum.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

A PVC coating minimizes the chance of scratching the surface of your material. These rivet nuts are more corrosion resistant than zinc-plated steel rivet nuts.

The coated flange seals out moisture and prevents corrosion.

A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

Stainless steel nuts have excellent corrosion resistance in most environments.

These screw-mount nuts are often used to attach glides and levels to wood.

These nylon nuts are chemical resistant, nonconductive, and lightweight.

These 18-8 stainless steel anchors have good chemical resistance.

A zinc plating provides corrosion resistance in wet environments.

A zinc plating provides corrosion resistance in wet environments.

Install like a stud anchor—just thread the anchor, a nut, and a washer onto the end of a threaded rod, drive into a hole, and turn the nut to expand the base. Also known as rod anchors, they're often used with threaded rod to hang pipe and wiring.

Also known as double expansion anchors, these expand from both sides for full contact and a secure hold.

An adjustable stop allows you to set anchors at consistent depths. Use with a hammer.

Drive these tools with a hammer to expand anchors.

For narrow holes and small cavities where toggle anchors won't fit.

Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.