McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    6 Products

    Paste Threadlockers

    Image of Product. Front orientation. Threadlockers. Paste Threadlockers, Stick.

    Stick

    Even when applying to parts installed vertically or overhead, these threadlockers won’t drip. Paste stays put whether you squeeze, roll, or dab it onto fasteners. The bond begins to harden when you thread coated surfaces together, blocking exposure to air.
    Medium Locking Strength—Strong enough for most applications, these threadlockers hold firmly until you break their bond with a combination or ratchet wrench.
    High Locking Strength—Keep fasteners firmly in place in motors, pumps, and other applications subjected to heavy shock and vibration. Breaking the bond of these threadlockers requires a propane torch, heat gun, or induction heater. As a result, they shouldn't be used in setups that you disassemble often.
    Container
    Mfr. Model
    No.
    Net Wt.
    Type
    Begins to
    Harden
    Color
    Breakaway
    Torque
    Temp. Range
    Consistency
    Viscosity
    Reaches Full
    Strength
    Each
    Medium Locking Strength
     
    Loctite®
    2480.32 oz.Stick10 min.Blue120 in·lbf-65° F to 300° FPasteNot Rated24 hr.0000000000000
    2480.67 oz.Stick10 min.Blue120 in·lbf-65° F to 300° FPasteNot Rated24 hr.000000000000
     
    High Locking Strength
     
    Loctite®
    2680.32 oz.Stick20 min.Red220 in·lbf-65° F to 300° FPasteNot Rated24 hr.000000000000
    2680.67 oz.Stick20 min.Red220 in·lbf-65° F to 300° FPasteNot Rated24 hr.000000000000
     

    Gel Threadlockers

    Image of Product. Front orientation. Threadlockers. Gel Threadlockers, Stick.

    Stick

    With a slower flow than liquids, gel threadlockers cling to fasteners for more controlled application and less mess. They begin to harden when you thread coated surfaces together, blocking exposure to air.
    Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes; and cadmium and zinc coatings.
    Medium Locking Strength—Strong enough for most applications, these threadlockers hold firmly until you break their bond with a combination or ratchet wrench.
    High Locking Strength—Keep fasteners firmly in place in motors, pumps, and other applications subjected to heavy shock and vibration. Breaking the bond of these threadlockers requires a propane torch, heat gun, or induction heater. As a result, they shouldn't be used in setups that you disassemble often.
    Container
    Mfr. Model
    No.
    Net Wt.
    Type
    Begins to
    Harden
    Color
    Breakaway
    Torque
    Temp. Range
    Consistency
    Viscosity
    Reaches Full
    Strength
    Each
    Medium Locking Strength
     
    Permatex
    240100.35 oz.Stick15 min.Blue115 in·lbf-65° F to 300° FGel200,000 cP24 hr.0000000000000
     
    High Locking Strength
     
    Permatex
    270100.35 oz.Stick15 min.Red175 in·lbf-65° F to 300° FGel240,000 cP24 hr.000000000000
     
    back to top