Three Square Files | McMaster-Carr

Filter by

For Use on

Length

Grit Rating

Width

File Type

Sold as

File Pattern

Face Tooth Style

Flexibility

DFARS Compliance

File Cut Number

Number of Pieces

RoHS Compliance

Container Type

REACH Compliance

Abrasive Material

Handle Material

Diamond Surface Length

Minimum Grit

Maximum Grit

Thickness

For Saw Blade Teeth per Inch

Forward

How can we improve?

100 Products

About Files

Files, also known as American-pattern and machinists' files, are used to remove material quickly.

Precision files, also known as Swiss-pattern files, are made to exacting measurements to ensure smoothness and are useful for finishing delicate and intricate parts.

Double Cut

Single Cut

With three filing surfaces, these files work in spots others can't. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and file between saw teeth.

Black-oxide finish resists rust and clogging.

For technical drawings and 3-D models, click on a part number.

					For Coarse Finish		For Medium Finish		For Fine Finish
Lg.	Wd.	For Saw Blade Teeth Per Inch	Finish	For Use On		Each		Each		Each
Double-Cut Faces
6"	7/16"	__	Black Oxide	Steel, Iron	00000000	000000	000000	00	000000	00
6"	1/2"	__	__	Steel, Iron	0000000	00000	0000000	00000	0000000	000000
8"	5/8"	__	__	Steel, Iron	0000000	00000	0000000	00000	0000000	00000
8"	5/8"	__	Black Oxide	Steel, Iron	00000000	00000	000000	00	000000	00
10"	3/4"	__	__	Steel, Iron	0000000	00000	0000000	00000	0000000	00000
Single-Cut Faces
4"	3/16"	8-14	__	Steel, Iron	000000	00	000000	00	0000000	0000
4"	1/4"	5-11	__	Steel, Iron	000000	00	000000	00	0000000	0000
5"	3/16"	12-16	__	Steel, Iron	000000	00	000000	00	0000000	0000
5"	1/4"	5-11	__	Steel, Iron	000000	00	000000	00	0000000	0000
6"	1/4"	8-14	__	Steel, Iron	000000	00	000000	00	0000000	0000
6"	1/4"	12-16	__	Steel, Iron	000000	00	000000	00	0000000	0000
6"	5/16"	5-11	__	Steel, Iron	000000	00	000000	00	0000000	0000
7"	3/8"	5-11	__	Steel, Iron	000000	00	000000	00	0000000	0000
7"	3/8"	8-14	__	Steel, Iron	000000	00	000000	00	0000000	0000
8"	5/16"	12-16	__	Steel, Iron	000000	00	000000	00	0000000	0000
8"	3/8"	8-14	__	Steel, Iron	000000	00	000000	00	0000000	0000
8"	1/2"	5-11	__	Steel, Iron	000000	00	000000	00	0000000	0000

Precision Triangular Files

Double Cut

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. They have three filing surfaces with two sets of diagonal teeth to work in spots others can't. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

For technical drawings and 3-D models, click on a part number.

			For Coarse Finish (No. 00)		For Medium Finish (No. 0)		For Fine Finish (No. 1)		For Fine Finish (No. 2)
Lg.	Wd.	For Use On		Each		Each		Each		Each
Double-Cut Faces
4"	9/32"	Steel, Iron	0000000	000000	0000000	000000	000000	00	0000000	000000
6"	3/8"	Steel, Iron	0000000	00000	0000000	00000	0000000	000000	0000000	00000
8"	1/2"	Steel, Iron	0000000	00000	0000000	00000	0000000	00000	0000000	00000

Electrical-Insulating Triangular Files

Double Cut

An insulated handle protects against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet ASTM F1505. They have three filing faces to work in spots others can’t. The faces have two sets of diagonal teeth for rapid material removal.

						For Fine Finish
Lg.	Wd.	For Use On	Material	Handle Material	Specifications Met		Each
Double-Cut Faces
8"	1/4"	Steel, Iron	Steel	Plastic	ASTM F1505	0000000	000000

File Sets

For technical drawings and 3-D models, click on a part number.

5-Piece Sets with Rubber Handles


	Half Round with Double-Cut Faces	Tapered Rectangular with Double-Cut Faces
	Tapered Rectangular with Single-Cut Faces	Thin-Tapered Triangular with Single-Cut Faces

Includes	Container Type	For Use On		Each
One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—8" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—8" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—6" Lg.	Plastic Pouch	Steel, Iron	0000000	000000

6-Piece Sets


Half Round with Double-Cut Faces	Tapered Rectangular with Double-Cut Faces	Tapered Round with Double-Cut Face
Tapered Square with Double-Cut Faces	Thin-Tapered Rectangular with Double-Cut Faces	Thin-Tapered Triangular with Single-Cut Faces

Includes	Container Type	For Use On		Each
One Fine-Finish Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—4" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—4" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg.	Canvas Roll-Up Pouch	Steel, Iron	0000000	000000

6-Piece Sets with Wood Handles


Rectangular with Double-Cut Faces	Tapered Half Round with Double-Cut Faces	Tapered Round with Double-Cut Face
Tapered Square with Double-Cut Faces	Tapered Triangular with Double-Cut Faces	Thin-Tapered Rectangular with Double-Cut Faces

Includes	Container Type	For Use On		Each
One Medium-Finish Rectangular File with Double-Cut Faces—4" Lg. One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg.	Metal Case	Steel, Iron	0000000	000000

6-Piece Sets with Wood Handles


Half Round with Double-Cut Faces	Tapered Rectangular with Double-Cut Faces	Tapered Round with Double-Cut Face
Tapered Square with Double-Cut Faces	Thin-Tapered Rectangular with Double-Cut Faces	Thin-Tapered Triangular with Single-Cut Faces

Includes	Container Type	For Use On		Each
One Fine-Finish Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—4" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—4" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—4" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg.	Canvas Roll-Up Pouch	Steel, Iron	0000000	000000

9-Piece Sets


	Half Round with Double-Cut Faces	Rasp
	Tapered Rectangular with Double-Cut Faces	Tapered Rectangular with Single-Cut Faces
Tapered Round with Double-Cut Face	Tapered Square with Double-Cut Faces	Thin-Tapered Triangular with Single-Cut Faces

Includes	Container Type	For Use On		Each
One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—7" Lg. One 10" Lg. Rasp One File Cleaner	Canvas Roll-Up Pouch	Steel, Iron	0000000	0000000

9-Piece Sets with Wood Handles


	Half Round with Double-Cut Faces	Rasp
	Tapered Rectangular with Double-Cut Faces	Tapered Rectangular with Single-Cut Faces
Tapered Round with Double-Cut Face	Tapered Square with Double-Cut Faces	Thin-Tapered Triangular with Single-Cut Faces

Includes	Container Type	For Use On		Each
One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Thin-Tapered Triangular File with Single-Cut Faces—7" Lg. One 10" Lg. Rasp One File Cleaner	Canvas Roll-Up Pouch	Steel, Iron	0000000	0000000

13-Piece Sets


	Half Round with Double-Cut Faces	Rectangular with One Double-Cut Face and One Single-Cut Face
	Tapered Rectangular with Double-Cut Faces	Tapered Rectangular with Single-Cut Faces
Tapered Round with Double-Cut Face	Tapered Square with Double-Cut Faces	Tapered Triangular with Double-Cut Faces

Includes	Container Type	For Use On		Each
One Coarse-Finish Rectangular File with One Double-Cut Face and One Single-Cut Face—10" Lg. One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File (For Use Only On Aluminum) with Double-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Medium-Finish Tapered Triangular File with Double-Cut Faces—8" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—10" Lg. One File Cleaner	Canvas Roll-Up Pouch	Steel, Iron	0000000	0000000

13-Piece Sets with Wood Handles


	Half Round with Double-Cut Faces	Rectangular with One Double-Cut Face and One Single-Cut Face
	Tapered Rectangular with Double-Cut Faces	Tapered Rectangular with Single-Cut Faces
Tapered Round with Double-Cut Face	Tapered Square with Double-Cut Faces	Tapered Triangular with Double-Cut Faces

Includes	Container Type	For Use On		Each
One Coarse-Finish Rectangular File with One Double-Cut Face and One Single-Cut Face—10" Lg. One Coarse-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Coarse-Finish Tapered Rectangular File (For Use Only On Aluminum) with Double-Cut Faces—10" Lg. One Coarse-Finish Half-Round File with Double-Cut Faces—10" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—10" Lg. One Medium-Finish Tapered Triangular File with Double-Cut Faces—8" Lg. One Medium-Finish Tapered Square File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Rectangular File with Single-Cut Faces—10" Lg. One Fine-Finish Half-Round File with Double-Cut Faces—10" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—10" Lg. One File Cleaner	Canvas Roll-Up Pouch	Steel, Iron	0000000	0000000

Precision File Sets

5-Piece Set

6-Piece Set

Half Round

Rectangular

Round

Square

Triangular

Knife

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts.

5-Piece Sets
Finish No.	Includes	Handle Material	Container Type	For Use On		Each
00	One Coarse-Finish Rectangular File with Double-Cut Faces—8 1/2" Lg. One Coarse-Finish Tapered Half-Round File with Double-Cut Faces—8 1/2" Lg. One Coarse-Finish Tapered Round File with Double-Cut Face—8 1/2" Lg. One Coarse-Finish Tapered Triangular File with Double-Cut Faces—8 1/2" Lg. One Coarse-Finish Tapered Square File with Double-Cut Faces—8 1/2" Lg.	Steel	Plastic Pouch	Steel, Iron	0000000	000000
1	One Fine-Finish Rectangular File with Double-Cut Faces—8 1/2" Lg. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—8 1/2" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—8 1/2" Lg. One Fine-Finish Tapered Triangular File with Double-Cut Faces—8 1/2" Lg. One Fine-Finish Tapered Square File with Double-Cut Faces—8 1/2" Lg.	Steel	Plastic Pouch	Steel, Iron	0000000	00000
6-Piece Sets
0	One Medium-Finish Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Medium-Finish Tapered Round File with Double-Cut Face—6" Lg. One Medium-Finish Triangular File with Double-Cut Faces—6" Lg. One Medium-Finish Knife File with Double-Cut Faces—6" Lg.	__	Plastic Pouch	Steel, Iron	00000000	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Fine-Finish Knife File with Double-Cut Faces—6" Lg.	__	Plastic Pouch	Steel, Iron	00000000	000000
4	One Extra Fine-Finish Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Thin-Tapered Rectangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Half-Round File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Tapered Round File with Double-Cut Face—6" Lg. One Extra Fine-Finish Triangular File with Double-Cut Faces—6" Lg. One Extra Fine-Finish Knife File with Double-Cut Faces—6" Lg.	__	Plastic Pouch	Steel, Iron	00000000	000000

Triangular Files for Stainless Steel

Double Cut

With three filing surfaces, these corrosion-resistant files work in spots others can't with little to no clogging. They have two sets of diagonal teeth. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

			For Medium Finish		For Fine Finish
Lg.	Wd.	For Use On		Each		Each
Double-Cut Faces
8"	9/16"	Stainless Steel	0000000	000000	0000000	000000

Precision Triangular Files for Stainless Steel

Double Cut

Made to exacting measurements to ensure smoothness, these corrosion-resistant files are used for finishing delicate and intricate parts with little to no clogging. They have three filing surfaces with two sets of diagonal teeth to work in spots others can't. Files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

For technical drawings and 3-D models, click on a part number.

			For Medium Finish (No. 0)		For Fine Finish (No. 2)
Lg.	Wd.	For Use On		Each		Each
Double-Cut Faces
8"	9/16"	Stainless Steel	0000000	000000	0000000	000000

Triangular Diamond Files

4.328" Diamond Surface Lg.

Tapered

With three filing surfaces, these files work in spots others can't. Diamond is the hardest, longest-lasting abrasive available and strong enough to file hard materials.

For technical drawings and 3-D models, click on a part number.

				For Coarse Finish (80-100 Grit)		For Medium Finish (120-150 Grit)		For Fine Finish (150-180 Grit)
Diamond Surface Lg.	Lg.	Wd.	For Use On		Each		Each		Each
Tapered
4.328"	8 5/8"	0.382"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	000000	0000000	000000	0000000	000000

Diamond File Sets

5-Piece Set

6-Piece Set

Half Round

Rectangular

Round

Square

Triangular

Point

The hardest files available, these are the longest lasting and strong enough to file hard materials.

For technical drawings and 3-D models, click on a part number.

5-Piece Sets for Coarse Finish (80-100 Grit)

Includes	For Use On		Each
One Coarse-Finish (80-100 Grit) Rectangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.409" Wd. × 0.11" Thick. One Coarse-Finish (80-100 Grit) Tapered Half-Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.496" Wd. × 0.154" Thick. One Coarse-Finish (80-100 Grit) Tapered Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.268" Dia. One Coarse-Finish (80-100 Grit) Tapered Triangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.382" Wd. One Coarse-Finish (80-100 Grit) Tapered Square File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.24" Wd.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	0000000

5-Piece Sets for Medium Finish (120-140 Grit)

Includes	For Use On		Each
One Medium-Finish (120-140 Grit) Rectangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.409" Wd. × 0.11" Thick. One Medium-Finish (120-140 Grit) Tapered Half-Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.496" Wd. × 0.154" Thick. One Medium-Finish (120-140 Grit) Tapered Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.268" Dia. One Medium-Finish (120-140 Grit) Tapered Triangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.382" Wd. One Medium-Finish (120-140 Grit) Tapered Square File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.24" Wd.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	0000000

5-Piece Sets for Fine Finish (170-200 Grit)

Includes	For Use On		Each
One Fine-Finish (170-200 Grit) Rectangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.409" Wd. × 0.11" Thick. One Fine-Finish (170-200 Grit) Tapered Half-Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.496" Wd. × 0.154" Thick. One Fine-Finish (170-200 Grit) Tapered Round File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.268" Dia. One Fine-Finish (170-200 Grit) Tapered Triangular File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.382" Wd. One Fine-Finish (170-200 Grit) Tapered Square File with 4.328" Lg. Diamond Surface—8.625" Lg. × 0.24" Wd.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	0000000

6-Piece Sets for Coarse Finish (80-100 Grit)

Includes	For Use On		Each
One Coarse-Finish (80-100 Grit) Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.25" Wd. × 0.125" Thick. One Coarse-Finish (80-100 Grit) Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.375" Wd. × 0.125" Thick. One Coarse-Finish (80-100 Grit) Round File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Dia. One Coarse-Finish (80-100 Grit) Triangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Coarse-Finish (80-100 Grit) Square File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Coarse-Finish (80-100 Grit) Tapered Point File with 0.5"-0.875" Lg. Diamond Surface—6" Lg. × 0.125" Wd.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	0000000

6-Piece Sets for Medium Finish (120-140 Grit)

Includes	For Use On		Each
One Medium-Finish (120-140 Grit) Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.25" Wd. × 0.125" Thick. One Medium-Finish (120-140 Grit) Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.375" Wd. × 0.125" Thick. One Medium-Finish (120-140 Grit) Round File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Dia. One Medium-Finish (120-140 Grit) Triangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Medium-Finish (120-140 Grit) Square File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Medium-Finish (120-140 Grit) Tapered Point File with 0.5"-0.875" Lg. Diamond Surface—6" Lg. × 0.125" Wd.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	0000000

6-Piece Sets for Fine Finish (170-200 Grit)

Includes	For Use On		Each
One Fine-Finish (170-200 Grit) Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.25" Wd. × 0.125" Thick. One Fine-Finish (170-200 Grit) Rectangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.375" Wd. × 0.125" Thick. One Fine-Finish (170-200 Grit) Round File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Dia. One Fine-Finish (170-200 Grit) Triangular File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Fine-Finish (170-200 Grit) Square File with 1.5" Lg. Diamond Surface—6" Lg. × 0.125" Wd. One Fine-Finish (170-200 Grit) Tapered Point File with 0.5"-0.875" Lg. Diamond Surface—6" Lg. × 0.125" Wd.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	0000000

Diamond Needle Files

Tapered Triangular

The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.

Files with 1.563" diamond surface length are also known as escapement files.

Triangular files have three filing surfaces to work in spots others can't.

For technical drawings and 3-D models, click on a part number.

				For Coarse Finish (80-100 Grit)		For Medium Finish (120-150 Grit)		For Fine Finish (150-180 Grit)
Diamond Surface Lg.	Lg.	Wd.	For Use On		Each		Each		Each
Tapered Triangular
1.563"	5 1/2"	0.122"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	000000	0000000	000000	0000000	000000
2.75"	5 1/2"	0.154"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	00000	0000000	00000	000000	00000

Needle Files

Tapered Triangular

The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Triangular files have three filing surfaces to work in spots others can't.

Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

For technical drawings and 3-D models, click on a part number.

				For Medium Finish (No. 0)		For Fine Finish (No. 2)		For Extra Fine Finish (No. 4)
Lg.	Wd.	Face Tooth Style	For Use On		Each		Each		Each
Tapered Triangular
6 1/4"	0.154"	Double Cut × Double Cut	Steel, Iron	0000000	000000	0000000	000000	0000000	000000

Bend-and-Stay Needle Files

Triangular

Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. Files have one set of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Triangular files have three filing surfaces to work in spots others can't.

				For Fine Finish (No. 2)
Lg.	Wd.	Face Tooth Style	For Use On		Each
Triangular
6 1/4"	1/8"	Single Cut	Steel, Iron	0000000	000000

Diamond Needle File Sets


Straight Rectangular	Tapered Crossing	Tapered Half Round
Tapered Round	Tapered Square	Tapered Triangular

The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tips allow precise work in tight spots.

For technical drawings and 3-D models, click on a part number.

6-Piece Sets for Coarse Finish (80-100 Grit)

Includes	For Use On		Each
One Coarse-Finish (80-100 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Coarse-Finish (80-100 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Coarse-Finish (80-100 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Coarse-Finish (80-100 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Coarse-Finish (80-100 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Coarse-Finish (80-100 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	000000

6-Piece Sets for Medium Finish (120-140 Grit)

Includes	For Use On		Each
One Medium-Finish (120-140 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Medium-Finish (120-140 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Medium-Finish (120-140 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Medium-Finish (120-140 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Medium-Finish (120-140 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Medium-Finish (120-140 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	000000

6-Piece Sets for Fine Finish (170-200 Grit)

Includes	For Use On		Each
One Fine-Finish (170-200 Grit) Rectangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.201" Wd. × 0.055" Thick. One Fine-Finish (170-200 Grit) Tapered Half-Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.213" Wd. × 0.075" Thick. One Fine-Finish (170-200 Grit) Tapered Round File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.118" Dia. One Fine-Finish (170-200 Grit) Tapered Triangular File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.154" Wd. One Fine-Finish (170-200 Grit) Tapered Square File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.098" Wd. One Fine-Finish (170-200 Grit) Tapered Crossing File with 2.75" Lg. Diamond Surface—5.5" Lg. × 0.185" Wd. × 0.087" Thick.	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Brick	0000000	000000

Bend-and-Stay Needle File Sets


	Barrette	Half Round	Rectangular
Round	Square	Triangular

Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

6-Piece Sets
Finish No.	Includes	For Use On		Each
2	One Fine-Finish Tapered Rectangular File with Single-Cut Faces—6 1/4" Lg. × 7/32" Wd. × 1/16" Thick. One Fine-Finish Tapered Half-Round File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 5/64" Thick. One Fine-Finish Tapered Round File with Single-Cut Face—6 1/4" Lg. × 1/8" Dia. One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 1/8" Wd. One Fine-Finish Tapered Square File with Single-Cut Faces—6 1/4" Lg. × 7/64" Wd. One Fine-Finish Tapered Barrette File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 1/16" Thick.	Steel, Iron	0000000	0000000

Economy Needle File Sets

6-Piece Set

12-Piece Set

Rectangular

Tapered Half Round

Tapered Rectangular

Tapered Round

Tapered Square

Tapered Triangular

Joint

Slitting

Tapered Barrette

Tapered Crossing

Tapered Knife

Tapered Marking

These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.

For technical drawings and 3-D models, click on a part number.

6-Piece Sets—5 1/2" Lg.

Finish No.	Includes	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.	Steel, Iron	0000000	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd.	Steel, Iron	0000000	00000
4	One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.	Steel, Iron	0000000	00000

6-Piece Sets—6 1/4" Lg.

Finish No.	Includes	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.	Steel, Iron	0000000	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.	Steel, Iron	0000000	00000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd.	Steel, Iron	0000000	00000

12-Piece Sets—5 1/2" Lg.

Finish No.	Includes	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.	Steel, Iron	0000000	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.	Steel, Iron	0000000	00000
4	One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd.	Steel, Iron	0000000	00000

12-Piece Sets—6 1/4" Lg.

Finish No.	Includes	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.	Steel, Iron	0000000	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.	Steel, Iron	0000000	00000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File with Double-Cut Faces, One Single-Cut Edge, and One Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.	Steel, Iron	0000000	00000

Needle File Sets

Joint

Rectangular

Slitting

Tapered Barrette

Tapered Crossing

Tapered Half Round

Tapered Knife

Tapered Marking

Tapered Rectangular

Tapered Round

Tapered Square

Tapered Triangular

These files are for frequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

For technical drawings and 3-D models, click on a part number.

12-Piece Sets—4" Lg.

Finish No.	Includes	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick.	Steel, Iron	0000000	0000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick.	Steel, Iron	0000000	000000

12-Piece Sets—5 1/2" Lg.

Finish No.	Includes	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.	Steel, Iron	0000000	0000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.	Steel, Iron	0000000	000000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick.	Steel, Iron	0000000	000000

12-Piece Sets—6 1/4" Lg.

Finish No.	Includes	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.	Steel, Iron	0000000	0000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.	Steel, Iron	0000000	000000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.	Steel, Iron	0000000	000000
6	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick.	Steel, Iron	0000000	000000

Carbide Needle File Sets

Second only to diamond in hardness, these files last 100 times longer than standard files. The small tips allow precise work in tight spots.

For technical drawings and 3-D models, click on a part number.

6-Piece Sets—5 1/2" Lg.


Knife	Rectangular	Round
Square	Triangular

Includes	For Use On		Each
One Extra-Fine-Finish (280 Grit) Rectangular File—5 1/2" Lg. × 0.236" Wd. × 0.083" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—5 1/2" Lg. × 0.128" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—5 1/2" Lg. × 0.167" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—5 1/2" Lg. × 0.128" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—5 1/2" Lg. × 0.207" Wd. × 0.089" Thick. One Plastic Handle	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick	0000000	000000

6-Piece Sets—7 1/8" Lg.


Knife	Rectangular	Round
Square	Triangular

Includes	For Use On		Each
One Extra-Fine-Finish (280 Grit) Rectangular File—7 1/8" Lg. × 0.394" Wd. × 0.108" Thick. One Extra-Fine-Finish (280 Grit) Tapered Round File—7 1/8" Lg. × 0.217" Dia. One Extra-Fine-Finish (280 Grit) Tapered Triangular File—7 1/8" Lg. × 0.276" Wd. One Extra-Fine-Finish (280 Grit) Tapered Square File—7 1/8" Lg. × 0.197" Wd. One Extra-Fine-Finish (280 Grit) Tapered Knife File—7 1/8" Lg. × 0.354" Wd. × 0.128" Thick. One Plastic Handle	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick	0000000	000000

Carbide Needle Files

Triangular

Second only to diamond in hardness, these files last 100 times longer than standard files. The small tip allows precise work in tight spots.

Triangular files have three filing surfaces to work in spots others can't.

For technical drawings and 3-D models, click on a part number.

				For Extra Fine Finish (280 Grit)
Lg.	Wd.	Thick.	For Use On		Each
Triangular
5 1/2"	0.167"	0.167"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick	0000000	000000
7 1/8"	0.276"	0.276"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbon Fiber, Graphite, Brick	0000000	00000