McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    20 Products

    Tilting Hand-Crank Rolling Lift Tables

    Image of Product. Front orientation. Lift Tables. Tilting Hand-Crank Rolling Lift Tables.
    Turn the hand wheels to adjust the load and tilt it up to 30° for a more ergonomic angle. Brakes on two of the casters keep the table stationary.
    Warning: Do not roll or reposition while under load. Never use to lift people.
    Wheel
    Wt. Cap.,
    lb.
    Lg.
    Wd.
    Ht.
    Elevation
    per Stroke
    Tabletop
    Ga.
    Lip
    Ht.
    Brake Type
    Configuration
    Material
    No. of
    Brakes
    Dia.
    Each
    Steel
    30024"24"34 5/8" to 42"1/8"123"Wheel BrakeFour Swivel CastersPlastic24"27955T40000000
     

    Precision-Adjust Cross-Slide Milling Tables

    Image of Product. Front orientation. Contains Annotated. Milling Tables. Precision-Adjust Cross-Slide Milling Tables, Tilting-Table 50 lb. Load Capacity.

    Tilting-Table 50 lb. Load

    Capacity

    For when handcrafted artistry matters. These tables position your work with exact alignment on the X- and Y-axes. Unlike CNC machines, they don’t need programming, so they’re great for one-off parts and quick prototypes. They’re precision ground to ensure accurate cuts every time.
    These tables mount on your milling machine or drill press. The thick handles give you a firm grip for smooth turning of the steel hand wheels. As the table slides on its axes, an adjustable steel gib minimizes sticking and slipping. Tighten the lock nuts to keep the table steady as you machine.
    Tilting Table—Cut your work from any angle. In addition to the same features as the Standard-Table 50 lb. Load Capacity table, these also position your work at any angle between 0° and 90°. Tighten the hex bolts on the side plates to keep the table at your desired tilt.
    50 lb. Load Capacity—Double the T-slots for twice as many fixturing possibilities. The four T-slots give you the space to make elaborate fixture setups or hold your work from multiple sides. Cut with trapezoid-shaped Acme threads, the internal X-Y screws minimize backlash and won't deform. Balanced to prevent unintentional movement, the crank handles take less effort to turn than hand wheels. With bulbous grips, these handles fit comfortably in your palm.
    Table
    Base
    Max.
    Travel
    X-Axis
    T-Slots
    Y-Axis
    T-Slots
    Lg.
    Wd.
    Lg.
    Wd.
    X-Axis
    Y-Axis
    X- and Y-Axis Adjustment
    Dial Graduations
    Keyway
    Size
    Overall
    Ht.
    No.
    of
    Wd.
    No.
    of
    Wd.
    Ctr.-to-Ctr.
    Flatness
    Tolerance
    Material
    Mounting Fasteners
    Included
    Each
    Tilting-Table 50 lb. Load Capacity
    12"6"5"9"8"4"0.001"5/8"4 5/8"17/16"37/16"3"0.001"IronNo5234A6000000000
     

    Tilting Electric Stationary Lift Tables

    Image of Product. Tilted Up. Front orientation. Lift Tables. Tilting Electric Stationary Lift Tables.
    Image of Product. Tilted Down. Front orientation. Lift Tables. Tilting Electric Stationary Lift Tables.

    Tilted Up

    Tilted Down

    Raise and tilt heavy loads for easy access at the angle you need. Often used to position containers, pallets, and other heavy items in loading docks and assembly areas, these tables help minimize strain during repetitive tasks. A motor-powered hydraulic pump adjusts loads with the push of a button. Tilt these tables up to a 40° angle. All have a retaining lip to keep items from sliding off when tilted.
    Motor
    Electrical
    Wt. Cap.,
    lb.
    Lg.
    Wd.
    Ht.
    Elevation Speed,
    in/sec
    Duty Cycle
    Electrical
    Phase
    Full Load
    Current, amp
    Connection
    No. of
    Blades
    Tabletop
    Ga.
    Max. Tilt
    Angle
    Lip
    Ht.
    Color
    Power Cord
    Lg., ft.
    Wire Lead
    Lg.
    Control
    Cord Lg., ft.
    Each
    Painted Steel
     
    With 115V AC Motor
    2,00048"48"8" to 42 1/2"1 1/410 Cycles per HourSingle11Straight Blade3340°12"Blue9—89988N111000000000
     
    With 460V AC Motor
    4,00048"48"8" to 42 1/2"315 Cycles per HourThree3——340°12"Blue—24"89988N11200000000
     

    Lift-and-Tilt Pallet Trucks

    Image of Product. Front orientation. Pallet Trucks. Lift-and-Tilt Pallet Trucks.
    Image of Attribute. Front orientation. Contains Annotated. Lift-and-Tilt Pallet Trucks.
    The handle operates the hydraulic pump to raise and lower loads and lets you tilt pallets up to 90° for access to the load. A relief valve prevents pressure build-up to provide overload protection. Their polyurethane wheels are abrasion-resistant and shock-absorbing. Use them on all floor types, including areas with debris.
    Note: Use with open-bottom pallets only.
    Warning: Never use to lift people
    Fork
    Overall
    For Pallet
    Wd.
    Overall Wt.
    Cap., lb.
    Lg.
    Wd.
    Vert. Ht.
    Horiz. Ht.
    Outside
    Spread
    Inside
    Spread
    Load Center
    Steering
    Arc
    Ht.
    Lg.
    Handle
    Ht.
    Wheel Configuration
    Brake Type
    Wheel
    Diameter
    Power
    Source
    Each
    Pump-Handle Adjustment with Black and Yellow Powder-Coated Steel Body
     
    Solid Polyurethane Rubber Wheels
    26" to 32"2,20031"6 1/2"29" to 37"3 1/4" to 11"21 1/2"8 1/2"7 1/2" to 15 1/2"170°44 1/4"41"45"Two Axle-Mounted Wheels and Two Swivel CastersWithout Brake5" (Steer)
    3" (Load)    		Manual9516T1000000000
     

    Precision-Adjust Cross-Slide Rotary Tables

    Image of Product. Front orientation. Contains Annotated. Rotary Tables. Precision-Adjust Cross-Slide Rotary Tables, Tilting Table.

    Tilting Table

    These tables do it all. They rotate 360° and slide on the X-Y axes to position your work with exact alignment. Cut with trapezoid-shaped Acme threads, the internal X-Y screws minimize backlash and won’t deform. They’re precision ground to ensure accurate cuts every time.
    Mount these tables on your milling machine, drill press, or grinder. They reduce the height of your setup by over 30% compared to stacking rotary and milling tables. Balanced to prevent unintentional movement, the crank handles take less effort to turn than hand wheels. With bulbous grips, these handles fit comfortably in your palm. Graduations engraved on the bases of the handle and table help you line up your work in fractions of a degree. Tighten the locking clamp on the side of the table base to keep the table steady as you machine.
    Tilting Table—The most versatile tables we offer. They also tilt in 1° increments to any angle between 0° and 90°, so you can machine parts from any direction. Tighten the hex bolts on the side plates to keep the table at your desired tilt.
    Gear Ratio—Gear ratio describes how far the table rotates with every turn of the handle. For example, a 90:1 gear ratio means a 90° turn of the handle rotates the table 1°.
    Load
    Cap., lb.
    Base
    Max.
    Travel
    T-Slots
    Rotation
    Graduations
    Table
    Dia.
    Horizontal
    Vertical
    Gear
    Ratio
    Lg.
    Wd.
    X-Axis
    Y-Axis
    X- and Y-Axis Adjustment
    Dial Graduations
    Overall
    Ht.
    No.
    of
    Wd.
    Ctr. Bore
    Type
    Ctr. Bore
    Dia.
    Adjustment
    Dial
    Table
    Flatness
    Tolerance
    Material
    Mounting Fasteners
    Included
    Each
    Tilting Table
    8"1608040:15"9"4"4"0.001"5"25/8"Straight1 5/8"1/20°1°0.001"IronNo5207A5000000000
    10"20010040:15"9"4"4"0.001"5 3/4"25/8"Straight1 5/8"1/20°1°0.001"IronNo5207A800000000
     

    Portable Fixture Tables for Welding

    Image of Product. Front orientation. Fixture Tables. Portable Fixture Tables for Welding.
    Fixture Table Connector Plates—Use a connector plate (sold separately) to join two tables together for a larger work surface.
    Fixture Tables
    Fixture Table
    Connector Plates
    Overall
    Slots
    Lg.
    Wd.
    Ht.
    Wt. Cap.,
    lb.
    Max. Tilt
    Angle
    No.
    of
    Wd.
    Ctr.-to-Ctr.
    Wt.,
    lb.
    Material
    Each
    Each
    30"20"26" to 32"35030°31 1/8"5 3/8"44Steel7891A100000007891A2000000
     

    Light Tables

    Image of Product. Bottom orientation. Light Boxes. Light Tables .
    A light box and drafting table in one, these tables illuminate the details of large drawings and plans. They’re also used to check circuit boards and other manufactured parts for unwanted holes, gaps, and other defects. The surface is lit from edge to edge with bright, even light from long-lasting LEDs, so it’s easy to see details. Made from impact-resistant plastic, the surface is stronger than glass and less likely to crack. It’s also less reflective, so it reduces glare during inspections. To find a comfortable angle or minimize shadows, you can lay these tables flat or tilt them up to 40°.
    Lighted
    Surface
    Overall
    Electrical
    Lg.
    Wd.
    Wd.
    Ht.
    Dp.
    Work Surface
    Style
    Surface
    Material
    Assembly
    Brightness,
    lm
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Features
    Each
    Oak Top with Gray Frame Steel Frame
    36"24"42"42" to 53"30"SlopedPlasticUnassembled777Straight Blade36Modesty Panel6307N11000000000
     

    Adjustable-Height Sloped-Top Desks

    Image of Product. Front orientation. Desks. Adjustable-Height Sloped-Top Desks.
    Adjust both the slope and height of the top to a comfortable position for drawing, drafting, and writing. Turn the knob on each leg to adjust not only the height, but also the slope of the top from 0° to 50°. These workstations have a modesty panel to provide privacy and leveling feet to compensate for uneven floors.
    Overall
    Top
    Adjustment
    Wd.
    Dp.
    Ht.
    Work Surface
    Style
    Wt. Cap.
    Thk.
    Mechanism
    Slope
    Foot
    Type
    Assembly
    Features
    Each
    Stationary
     
    White Laminate Top with Black Powder-Coated Steel Frame
    47 1/2"36"29 1/2" to 37 1/2"SlopedNot Rated3/4"Knob0° to 50°LevelingUnassembledModesty Panel6103T90000000
    60"37 1/2"29 1/2" to 37 1/2"SlopedNot Rated3/4"Knob0° to 50°LevelingUnassembledModesty Panel6103T700000000
     

    Electric Welding Positioners

    Mount a workpiece on these motorized turntables for smooth and continuous 360° rotary motion useful for creating circular welds. Turntables tilt and lock in place at angles up to 90° in 15° increments. Once the workpiece is attached to the turntable or chuck, press the foot pedal to start the motor. As the part rotates, your hands are free to focus on the weld.
    Load capacity is reduced as the table is tilted.
    25 lb. Load Capacity with 5" Dia. Turntable
    Image of Product. Front orientation. Contains Annotated. Welding Positioners. Electric Welding Positioners, Turntable, 25 lb. Load Capacity with Horizontal Table.
    Base
    Table
    Slots
    Electrical
    Rotation Speed
    Range, rpm
    Max. Ground
    Current, amp
    Lg.
    Wd.
    Overall
    Ht.
    Wt.,
    lb.
    Tilt
    Increments
    Max. Range
    of Motion
    No.
    of
    Lg.
    Wd.
    Voltage,
    V AC
    Freq., Hz
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Features
    Each
    0.4 to 64007"5"9"1415°360°31 3/8"3/8"12050, 60Straight Blade38Grounding Stud7860A356000000000
    Welding Positioner Chucks
    Three-Jaw Chuck—Use the three-jaw chuck to grip the outside of round items or the inside of pipe.
    Each
    Three-Jaw Chuck7860A420000000
    200 lb. Load Capacity with 12" Dia. Turntable
    Image of Product. Front orientation. Contains Annotated. Welding Positioners. Electric Welding Positioners, 200 lb. Load Capacity with Horizontal Table, Turntable.
    Remote Control Box—Positioners with a remote control box let you control the turntable cordlessly.
    Base
    Table
    Holes
    Electrical
    Rotation Speed
    Range, rpm
    Max. Ground
    Current, amp
    Lg.
    Wd.
    Overall
    Ht.
    Wt.,
    lb.
    Tilt
    Increments
    Max. Range
    of Motion
    No.
    of
    Thread Size
    Voltage,
    V AC
    Freq.,
    Hz
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Features
    Each
    0 to 1030012"12"12"5515°360°3, 95/16"-18, 1/2"-1312060Straight Blade36Grounding Stud, Remote Control Box7860A21000000000
    Welding Positioner Chucks
    Three-Jaw Chuck—Use the three-jaw chuck to grip the outside of round items or the inside of pipe.
    Each
    Three-Jaw Chuck7860A32000000000
    250 lb. Load Capacity with10" Dia. Turntable
    Image of Product. Front orientation. Contains Annotated. Welding Positioners. Electric Welding Positioners, Turntable, 250 lb. Load Capacity with Horizontal Table.
    Base
    Table
    Slots
    Electrical
    Rotation Speed
    Range, rpm
    Max. Ground
    Current, amp
    Lg.
    Wd.
    Overall
    Ht.
    Wt.,
    lb.
    Tilt
    Increments
    Max. Range
    of Motion
    No.
    of
    Lg.
    Wd.
    Voltage,
    V AC
    Freq., Hz
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Features
    Each
    1 to 640012 1/2"10 3/4"9 7/8"3815°360°43 1/4"7/16"12050, 60Straight Blade38Grounding Stud7860A394000000000
    Welding Positioner Chucks
    Three-Jaw Chuck—Use the three-jaw chuck to grip the outside of round items or the inside of pipe.
    Each
    Three-Jaw Chuck7860A420000000
    200 lb. Load Capacity with Three-Jaw Chuck
    Image of Product. Front orientation. Contains Annotated. Welding Positioners. Electric Welding Positioners, 200 lb. Load Capacity with Three-Jaw Chuck.
    Remote Control Box—Positioners with a remote control box let you control the turntable cordlessly.
    Chuck
    Base
    Electrical
    Rotation Speed
    Range, rpm
    OD
    Cap.
    Max. Ground
    Current, amp
    Lg.
    Wd.
    Overall
    Ht.
    Wt.,
    lb.
    Tilt
    Increments
    Max. Range
    of Motion
    Through-Hole
    Dia.
    Voltage,
    V AC
    Freq.,
    Hz
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Features
    Each
    0 to 106"1/4" to 3 1/2"30014"12"12"6015°360°1.5"12060Straight Blade36Grounding Stud, Remote Control Box7860A22000000000
    Turntables
    Each
    Turntable7860A31000000000

    Precision-Adjust Rotary Tables

    Image of Product. Front orientation. Contains Annotated. Rotary Tables. Precision-Adjust Rotary Tables, Heavy Duty Tilting Table.

    Heavy Duty Tilting Table

    Turn workpieces 360° for precise alignment during milling, drilling, and grinding. With finely ground worm gears, these tables give you fine control of your workpiece’s alignment to fractions of a degree. The gears also keep the tabletop from moving once your workpiece is in position, even if you bump it or press against it while you machine. Markings on the handle’s dial and the tabletop’s edge tell you how far you’ve moved, so you don’t overshoot your mark. The tabletop and base are ground so flat their surfaces vary less than the thickness of a single sheet of copy paper, so they give you the flattest and squarest possible surface for accurate work. The base also has both keyways and bolt slots to mount these tables in both vertical and horizontal orientations.
    Heavy Duty Tilting Table—The same upgraded performance as our heavy duty standard tables but with an adjustable tilt. Tilt these tables between 0° and 90° to cut your workpieces at an angle. Compared to our standard rotary tables, these move in smaller increments for finer control. They’re also machined three times flatter to virtually eliminate uneven positioning. Dual locks prevent even the slightest table rotation after the table is in position. Hardened and oil-immersed gears extend their life, especially in high-demand machining.
    Gear Ratio—Gear ratio describes how far the table rotates with every turn of the handle. For example, a 90:1 gear ratio means a 90° turn of the handle rotates the table 1°.
    Load
    Cap., lb.
    Base
    T-Slots
    Rotation
    Graduations
    Table
    Dia.
    Horizontal
    Vertical
    Gear
    Ratio
    Lg.
    Wd.
    Overall
    Ht.
    No.
    of
    Wd.
    Ctr. Bore
    Type
    Machine
    Taper No.
    Adjustment
    Dial
    Table
    Flatness
    Tolerance
    Material
    Mounting Fasteners
    Included
    Each
    Heavy Duty Tilting Table
    6"753590:19 3/4"6"8 1/2"33/8"Morse TaperMorse 31/4°1°0.0006"SteelNo5209A31000000000
     
    back to top