These latches use downward compression to pull surfaces together for sealing gasketed doors.

These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

These latches are typically used to secure hoods and covers.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

A safety catch prevents accidental opening.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

Each latch comes with a variety of strike plates for different mounting options.

These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.

Draw lightweight surfaces together with these latches.

Lift and turn the handle 180° to open and close these latches.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.

Lift and turn the handle 180° to open and close this lock.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

Hold workpieces of different thicknesses without adjustment.

Push the lever to lock the handle and prevent accidental opening.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

A nonreflective black oxide finish prevents glare that can interfere with machine vision systems.

Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.

Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp.

The mounting base secures these clamps to a rail or bar.

Mount these clamps below a surface.

Bolt to the side of an object. Often used to clamp lids and covers on containers.

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

The base fits into round or square holes on most workholding tables for clamping anywhere on the work surface.

Fit the draw arm over a latch plate and pull the handle to clamp.

Push the lever to lock the handle and prevent accidental opening.

Push or pull the plunger to hold your workpiece from the side.

The handle can be rotated 125° for easier access or extra clearance above the clamp.

Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.

Secure your workpiece from the side by fully extending the plunger, and push a lever to lock the handle in place.

Pull the handle backward to push the plunger forward. These clamps secure when the plunger is fully extended to hold your workpiece from the side.

Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side.

Use for repetitive clamping and in production environments or hard‐to‐reach locations.

For repetitive clamping, turn the holding screw to adjust the opening size one time, and then use the handle to secure and release workpieces.