Small enough to fit in your pocket.

Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface.

The smooth stainless steel surface allows for easy cleaning.

When the power goes out, these flashlights automatically light up. The head tilts so you can aim light wherever you need it.

At full power, these flashlights shine as bright as a stadium light. They’re the brightest in our offering.

Always have a flashlight on hand—these attach to a key ring.

If the power goes out, you’ll find these flashlights right away.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Tilt the head on these flashlights to point light where you need it in explosion-prone areas. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust.

Rated IP07, you can drop these penlights in water and they’ll still work. Plus, they’re small enough to fit in your pocket.

Drop these headlamps in water and they’ll still work—they’re IP rated to withstand submersion for at least 30 minutes.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap.

Clip these headlamps right into a mount on your tactical or rescue helmet.

Gently bend these single-use lightsticks to activate.

Bring light to areas that don't have electrical power service.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery to light up work where there’s no outlet.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you need them.

A mounting clip at the base lets you attach these lights to nearby surfaces.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

Hang these lights above your workspace—they shine through long tubes to distribute even light with minimal glare and shadows. Carry them where you need them and suspend them from pipes, beams, and other overhead surfaces.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.

Bring light to explosion-prone work areas. Rated NEC Class I, these lights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers.

Brighten remote areas using the same battery as your other cordless Milwaukee tools.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction.

With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped.

Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need.

As bright as stadium lights, these floodlights are the most powerful in our offering—they’ll brighten jobsites half the size of a football field. They run on a diesel generator you can use to power other lights and tools in the field.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

Illuminate machines or monitor processes in environments that reach up to 210° F. These lights have a thick housing that acts as a heat sink to protect the LEDs and driver from overheating.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Illuminate machines and monitor processes where flammable and combustible gases, dust, or fibers are present—from paint spray booths to chemical plants. These lights have an enclosure that contains sparks, flashes, and explosions.

Suspend these lights overhead or mount them above your workspace.

Illuminate inline flow sights to inspect the color, clarity, and flow of liquids in food and beverage, brewery, chemical, and pharmaceutical processing lines.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

Clip or clamp these lights near your work to illuminate what you’re working on without lighting up the whole room. Powered by a rechargeable battery, they’re often used in spaces where an outlet isn’t available.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

Create a high-intensity lighting system for inspecting small and microscopic parts. With a flexible fiber-optic cable, you can adjust these lights to direct light right where you need it, even in hard-to-reach spots.

Brighten enclosures and small spaces like closets and drawers—no hardwiring or outlets needed. Powered by a rechargeable battery, these lights are easy to install and help save on maintenance costs.

Illuminate your electronics cabinets and racks with long-lasting LED lights.

A sealed head and switch keeps these lights shining in wet environments. They swing out from the wall and adjust horizontally and vertically to illuminate loading dock and trailers.

With built-in LEDs, these lights deliver all the brightness of larger dock lights in a low-profile design. A hinge stop keeps the arm from extending past the dock door, and the curved design fits around the track.

Get a clear, crisp view of details and defects—these magnifying glasses have a grooved lens, which is also known as a Coddington magnifier.

An extra-wide lens that’s curved on the viewing side ensures edge-to-edge clarity.

View a clear image from edge to edge, even in dimly lit areas.

About the size of a credit card, these magnifiers have a lens that slides out of the case to inspect items and equipment on the go. When you slide them open, a bright LED light automatically turns on, making it easier to see details. The lens corrects for distortion near the edge, giving you a crisp, clear view across the entire lens.

A mirror bounces light from a flashlight around your part, making defects pop against a dark background.

Sturdy but flexible, these illuminated magnifiers have a weighted base to keep them still without tethering them to your workbench.

Two LED bulbs illuminate your work.

Switch between UV light and white light to catch defects you'd otherwise miss.

For a steady view of fine details even near vibrating machinery, lock each joint on the arm.