We will reply to your message within an hour.
Store, transport, and protect CNC tooling.
Organize and store your end mills.
Build a custom clamping system for holding lightweight objects such as beakers and laboratory equipment.
Also known as vacuum chucks, these plates secure thin and flexible parts that can’t be held with vises or clamps for milling, drilling, routing, and finishing operations. Connect the system to your shop’s compressed air supply and it's ready to use.
Mount workpiece holders, light machinery, collaborative robots, and other components onto these tables to create custom workspaces, no drilling or tapping required.
Foldable for transport and storage, use these tables as a sturdy work surface for welding, assembly, cutting, and other tasks around your facility.
Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.
These plates have three T-slots for use with T-slot nuts, bolts, and setup studs.
Precision ground to the tightest parallel tolerance, these steel plates have threaded and unthreaded holes in a grid pattern to support precise positioning and repeatability when machining.
Precisely position work on X- and Y-axes using the handles.
Rotate your work 360°. These tables can be mounted horizontally or vertically.
Rotate work 360° and precisely position it on X- and Y-axes by turning the handles.
Prevent chips, debris, and small parts from falling into T-slots.
Use these components in coordinate measuring machine (CMM) applications to raise a workpiece and reliably position it on a fixture plate with ¼"-20 holes.
Mount a workpiece on these motorized turntables for smooth and continuous 360° rotary motion useful for creating circular welds. Turntables tilt and lock in place at angles up to 90° in 15° increments.
Support all brands of miter saws at a comfortable working height.
Each hole is sized to hold the 1/2" shank of a reduced-shank drill bit and marked with a bit size.
These stands hold round-shank drill bits of different sizes. The holes are marked with the bit size and decimal equivalent.
Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents.
These cabinets have one undivided drawer.
The drawer is divided into labeled compartments.
The compartments are sized to hold two reduced-shank drill bits and are marked with the bit size.
Store and organize drill bits so they stay in good working condition and don't go missing.
Keep taps and drill bits organized. All holes are labeled with sizes. Taps and drill bits are not included.
These steel cases close for easy transport and are labeled with sizes for organizing tools. Taps and drill bits are not included.
Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.
Set up your heat gun for hands-free operation.
Fold the legs and use the handle to carry these workbenches with one hand.
The sloped top, drainage hole and plug, and drain pan contain spills when working with fluids.
Choose a workbench and then add any of the optional accessories. All workbenches come with a support brace and have legs with knockouts in the front and back to accept duplex electrical outlets.
To keep work from falling off the top, these workbenches have a backstop and side stops.
Keyhole slots in the legs allow you to adjust the height of these workbenches in 1 1/2" increments.
These workbenches have plastic frames that won't rust or dent.
For added security, drawers are concealed behind padlockable doors.
Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.
These workbenches range in size from 32"-42" wide.
At 24" wide, these compact workbenches provide storage and a work surface even when space is limited.
These workbenches are dent and rust resistant.
Start with the workbench and then customize the interior by adding drawers and shelves.
At 48" wide and greater, these workbenches have a larger work surface and more storage than our standard cabinet workbenches.
Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.
These workbenches have bases with a combination of drawers and doors that offer plenty of storage options for tools and parts.
Often used in laboratories and food-processing plants, these workbenches resist corrosion.
Make your own sawhorse with these brackets and five 2 × 4s, 2 × 6s, or 2 × 12s.
With their compact size, these sawhorses are easy to store and transport.
Adjust the flexible arm to nearly any position.
Install these attachments onto Starrett magnetic-base holders for more precise control over positioning.
The base is comprised of adjustable magnetic pins which allow it to conform to any shape and grip most metal surfaces.
Use this holder in areas with limited space. It has a nut and bolt for holding a 1/4” lug-back indicator.
For more versatility than other low-profile holders, this holder has six locations for mounting indicators and accessories, including two mounting holes and four places to mount an indicator lug back with the included thumb screws.
Use a swivel clamp to attach an indicator to the positioning arm.
A heavy cast iron base adds stability. These stands hold indicators in place for taking accurate readings.
Position the arm by adjusting joints at the top, middle, and bottom.
Commonly used on workbenches, these stands have a heavy granite base for stability. They hold indicators in place for taking accurate readings.
These holders come with a calibration certificate traceable to NIST states that the granite base has passed a test for surface accuracy. The extremely tight flatness tolerances of the granite allow for nearly frictionless workpiece movement and provide an accurate reference plane for inspection work.
Attach the C-clamp on this holder to your Bridgeport J head to take indicator measurements without obstructing the cutting tool.
Attach the C-clamp on these holders to your milling machine head to take indicator measurements without obstructing the cutting tool.
Vise-grip locking pliers clamp these holders to most thin, flat surfaces, and the flexible arm lets you position your indicator around obstructions.
Mount these holders into a machine spindle and use with your indicator to center workpieces.
Use these attachments to mount indicators in chucks, tool posts, height gauges, or a variety of other setups.
Put your micrometer in a stand to free up your hands while measuring.
Rollers support and help guide material into machinery.
Ball transfers allow movement in any direction so you can turn material without lifting it.
Arms are long and at a wide angle to support pipe from 4" to 36" in diameter.
Place stands on a work surface to position pipe while machining.
Suspend tools to keep them out of the way but still within reach.
The head rotates 360° and tilts up and down.
Bend and wrap the legs around almost anything while keeping a level mounting surface.
Mount components of Ball-Grip Positioning Arms to the top of a positioning stand or tripod.
These jacks are often used to position small shop and laboratory equipment.
Organize all your 3D printing tools and supplies in one mobile workstation.
Also known as A/V and audio/visual carts, these carts come with an outlet strip and power cord.
Made of strong yet lightweight plastic, these carts have rounded corners to protect walls from damage and a storage compartment near the handle to contain small items.
These carts have easy-to-clean surfaces, lipped shelves to contain spills, and meet NSF/ANSI 2 sanitary standards for food-service applications.
Handles on either end and four swivel casters make these carts easy to maneuver.
Made of welded stainless steel, these carts combine corrosion resistance with the strength and durability of steel carts.
With shelves on one side and a pegboard on the other, these carts keep tools easily accessible.
Keep multimeters, oscilloscopes, and other instruments at a convenient viewing angle and height.
Carts meet NSF/ANSI standards for use in food-service areas.
Not only are these carts corrosion resistant, they also meet NSF/ANSI standards so they're suitable for food processing applications.
A braided cable on these carts dissipates static charges, making them useful for moving electronics and other static-sensitive equipment.
Carts are made of welded steel for maximum durability.
Drawers on these corrosion-resistant carts provide storage for tools and supplies, while the shelves hold larger items.
Reduce movement of items during transit—nonslip surfaces keep equipment from sliding around.
A pegboard holds tools and supplies, leaving the top shelf clear to transport other items or use as a work surface.
Store, organize, and transport spools of wire and small tools around your jobsite.
The shelves on these carts have high sides to prevent items from sliding off.
Wheel objects around your workspace on these carts, then fold the carts flat so they take up minimal space in storage.
Panels on three sides let you stack material high, while the top shelf can be used as a work surface.
Built-in steps and a compartment designed for light bulbs makes light maintenance easy.
A place for everything—these carts hold mops, buckets, cleaning supplies, floor signs, and more.
No need to lug around a ladder and a cart—these carts do the job of both.
Slide out the tote boxes to access stored materials.
High mesh panels on three sides and an open top allow you to stack tall items while maintaining good visibility and quick access.
The shelves are split into identical sides so you can efficiently organize two operations on one cart.
Keep paperwork organized while in transit. These carts hold letter- and legal-size hanging folders.
Reduce bending while loading and unloading—elevated trucks provide a comfortable working height. These seamless, lightweight trucks resist dents, corrosion, and many chemicals.
The top rim on these trucks is double-walled to handle the hardest knocks. They are made of lightweight plastic that resists dents, corrosion, and many chemicals.
Ribbed sidewalls add strength while a seamless interior prevents leaks in these lightweight trucks that resist dents, corrosion, and many chemicals.
Steel reinforcement prevents bulging on these lightweight, dent-resistant plastic trucks.
These seamless trucks have a capped drain for easy cleaning and sanitizing, and are made of FDA listed materials for use with food. They resist dents, corrosion, and many chemicals and have ribbed sidewalls for added strength.
To minimize bending and lifting, these trucks have a spring platform that adjusts to a comfortable working height as you load and unload.
These versatile hampers have flexible fabric sides that handle wet and dry loads.
These trucks have solid side panels to prevent small items from falling out. They are made from heavy gauge all-welded steel for strength and durability.
Mesh side panels maximize air circulation and visibility of contents. The all-welded steel construction delivers strength and durability.
Steel wagons are stronger and more durable than wood wagons.
The platforms on these wagons have a 6" high lip to contain loose material.
These wagons provide a smooth and gentle ride for transporting fragile loads. They are quieter and absorb impact better than steel wagons.
Load these trucks from either side to make quick work of moving large quantities of long, flat material such as doors, partitions, and sheet stock.
Made of steel for durability, these trucks have removable rails that allow you to configure them to accommodate a variety of long, flat loads.
These easy-to-clean, corrosion-resistant plastic trucks are reinforced with steel for strength. Removable rails allow you to configure them to accommodate a variety of long, flat loads.
Add wheels to a door, partition, or piece of sheet stock to make moving a one-person job.
Wood platforms are quieter, and grip loads and absorb impact better than trucks with a metal platform.
Reduce bending while loading and unloading—raised platforms keep material at a comfortable working height.
For the most demanding applications, these trucks carry loads of 1,200 lbs. or more.
Stakes at each corner hold loads in place during transport and are easily removed for unloading.
For added strength, the platform on these trucks is reinforced with steel to handle loads of 1,000 lbs. or more.
These economical trucks carry loads up to 400 lbs.
These economical trucks carry loads up to 600 lbs.
Tall handles let you stack higher than other trucks, and a narrow platform with rigid casters in the center and swivel casters at each end let you maneuver in tight spaces. Remove the handles for easy unloading.
These trucks have a drive system to move heavy materials without physical stress.
The aluminum platform on these trucks weighs less than many steel and wood platforms but is still strong.
These trucks resist rust and corrosion, making them the easiest platform trucks to clean.
Gravity keeps long loads centered and balanced—great for pipe, bar stock, and channel.
The combination of an offset handle and V-shaped cradle lets one person balance and move large, long loads.
Mount your bench-top air cleaner hood at a comfortable height for working.
Often used outdoors, these plastic cabinets are corrosion, weather, and impact resistant.
These cabinets are made of steel mesh for air circulation and visibility.
Keep an eye on inventory without opening the doors.
Made of stainless steel, these cabinets are corrosion and acid resistant.
Store up to 1,000 lbs. per shelf.
These durable cabinets have the thickest steel construction we offer and can hold 1,200 to 1,900 lbs. per shelf.
Safely rest hot soldering irons when they're not in use.
The tray and sponge are included for cleaning the tips.
Solder with complete control over the temperature—these stations let you adjust as you go.
These stations are ESD (electrostatic discharge) safe to protect sensitive components. The tip is a fixed temperature—change out the tip to adjust the temperature.
Hold a sponge for cleaning soldering iron tips.
Wheel your welding machine around the shop and keep its accessories organized on these carts.
Built to store your heaviest supplies, parts, and equipment.
The doors of these cabinets are made of steel mesh for air circulation and visibility.
The full-height compartment provides storage for tall items such as brooms and shovels.
This cabinet is built to store your heaviest supplies, parts, and equipment.
Provide controlled access to supplies with compartments that lock separately.
These stainless steel cabinets resist corrosion in harsh enviroments.
Hang these cabinets on the wall or place them on a workbench to keep floor space clear.
These cabinets have a shelf capacity of 1,900 lbs.—nearly 10 times more than other wall-mount shelf cabinets.
Use the pegboard in these cabinets to hang and organize tools, keys, and other items.
Often used outdoors, these cabinets are impact and weather resistant.
These cabinets are scratch and corrosion resistant for extra durability outdoors.
Mesh sides on this cabinet allow air circulation and visibility.
These cabinets have open shelves for storing larger supplies and equipment.
These cabinets have the thickest steel construction that we offer and come with removable bin boxes that hang from panels.
Turn a tight space into an efficient storage center with these shallow-depth cabinets.
Rollers inside the cabinet make contents easy to load and remove.
These cabinets are more corrosion resistant than steel.
Two slide-out shelves store up to 24 aerosol cans and offer easy access.
Store your drums horizontally to allow gravity-flow dispensing.
Keep your workplace safe and free up valuable floor space by storing drums outdoors.
Store harsh, nonflammable liquids in these plastic cabinets—even acid vapors won't corrode them.
Keep nonflammable liquids secure in these plastic cabinets. They resist corrosion from acid vapors and harsh chemicals.
Use cabinets individually, stacked, or connect side-by-side.
Use cabinets individually or stacked on top of compatible bench-height drawer cabinets.
Use cabinets individually or stacked.
Protect against corrosion with these stainless steel cabinets.
Remove the stackable cabinet and carry only the tools you need.
Keep your heaviest tools and parts in a single cabinet, or stack them for more storage.
Store your heaviest tools and parts. Use cabinets individually, stacked, or connect side-by-side.
Cabinets are stackable with others of the same width and depth.
Plastic cabinets and boxes won't dent, chip, or rust.
Create your own storage system by choosing a frame and adding boxes, which come in a variety of compartment configurations.
Carry multiple compartmented boxes at once using the built-in handle.
Protect your sensitive components from electrostatic damage.
Remove individual boxes to take the parts you need without moving the entire storage unit.
These cabinets won't dent, chip, or rust.
These cages are chrome plated for corrosion resistance and meet NSF/ANSI 2 standards for food equipment.
Padlock these cages to limit access to equipment and supplies.
Secure all the drawers in these cabinets with a single lock.
Wide instead of deep, these cabinets are often used in narrow aisles.
Store blueprints, CAD drawings, maps, and other large flat documents in these cabinets.
Keep aerosol cans organized and secure.
Ball-and-socket connections allow 360° positioning.
With strength for higher load capacities than other ball-grip positioning arms, these arms have a heavy duty construction.
Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.
Heavy duty construction adds strength for higher load capacities than other positioning arms.
Bend these arms to hold small equipment such as lights and microphones in almost any position.
Position small panels and displays with these compact arms.
A suction base makes it easy to move and attach these arms to smooth surfaces such as glass and polished metal.
Reduce hand fatigue in continuous fastening and grinding applications. Arms are counterbalanced to support the full weight of the tool as well as absorb torque.
Add a mounting surface to an any-which-way positioning arm.
Clamp onto the rim of a container up to 15" in diameter.
Mount small-batch mixers above batch cans and small containers.
Don't fumble with nuts, bolts, or shelf clips—shelves have rivets that tap into keyhole slots on the posts with a rubber mallet.
Shelves are reversible, allowing you to use them as a flush surface or with a lip to prevent items from falling off.
Only 14" wide, this shelving easily fits into tight spaces.
This shelving won't rust, dent, peel, or chip.
Also known as bulk racks, these units offer more storage space per level for large items and boxes.
Faster to assemble than other heavy duty shelving, these units require no hardware.The uprights come assembled, and the shelves slide into place.
The sloped shelves on these shelving units allow parts to flow forward, providing access and visibility.
This shelving is corrosion resistant and is often used in laboratories and food service applications.
These one-piece units have an all-welded steel construction to support heavy tools and materials.
The shelves on these units pull out to access heavy dies, machinery, and tools. They slide on roller bearings so you can retrieve contents horizontally with a forklift and vertically with a hoist, crane, or monorail system.
This shelving quickly snaps together with no tools or hardware needed, yet is strong enough to handle your heavy parts and equipment.
Also known as bulk racks, these units hold oversized equipment and raw material.
Our strongest and most durable shelving, these units have shelf capacities 25% higher than any other shelving.
This shelving has three times the shelf capacity of our Heavy Duty Wide and Deep Wire Shelving.
The three-sided design stabilizes packages and other contents when moving.
Pop the posts into the holes and these shelves are ready to load—no tools required.
These steel shelves are epoxy-coated, making them chemical and corrosion resistant.
Often used in food service areas and laboratories, these shelving units have removable, dishwasher-safe panels that are treated to prevent degradation caused by the growth of stain- and odor-causing bacteria.
This shelving is reinforced to hold nearly twice as much weight as other wire shelving, and is chrome plated to resist corrosion. Shelf panels are removable for easy cleaning.
These smooth, solid shelves are corrosion resistant and easy to clean.
The posts have grooves that allow shelves to adjust on 1" centers.
These standards and shelf brackets are more stable and hold heavier loads than single-slotted standards and brackets.
These standards can be surface mounted or flush mounted inside a routed groove.
These standards mount to a hanging bracket or track, making them easier to install than other standards.
These corrosion-resistant shelves hold twice the weight of other wall-mount shelving.
Design a complete shelving unit with these standards, shelf brackets, and metal shelves. All components are corrosion resistant and are often used for quality control, laboratory, and food service applications.
Also known as dunnage racks, these keep bulky items stored off the floor.
Create storage that fits your space with these stackable bin shelves.
Dividers snap in and out, allowing you to adjust the width of the compartments.
Hang your human-machine interface and swivel it around to save floor space and comfortably access touch screens, buttons, and other operating equipment.
Raise your enclosure to access switches, gauges, screens, and other parts at a comfortable working height.
An air cylinder automatically returns the stand to your set height as you add or remove parts of the load.
Hold pallets at one of three fixed heights.
Use one to three springs (included) to automatically keep pallets at a convenient height.