Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

No need to pull the socket off the tool—push a button to release.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These wrenches have an accuracy of ±2.0%.

Measure with an accuracy of ±2%.

A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.

Measure with an accuracy of ±7%.

Turn sockets from above when there's not room to swing a standard wrench handle.

Apply more torque than your wrench can deliver on its own. Use a multiplier with a torque wrench to ensure you do not exceed the maximum input torque.

Also known as impact drivers, use these tools with impact sockets to break frozen bolts and screws free. Strike with a hammer to tighten and loosen fasteners.

Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.

Use these wrenches for medium-volume production, general maintenance, and construction applications.

Use these wrenches with impact sockets only.

Already set to a specific torque limit, these adapters audibly click and release when you reach that setting to prevent overtightening.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Change heads to use these tools as an open-end, box, square drive, or hex-key wrench.

When the set torque is reached, these wrenches slip to disengage and stop overtightening.

These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 standards. When set torque is reached, these drivers signal with an audible click.

Choose a handle based on torque, and a shaft with the size you need.

Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.

A green light and a beep alert you when you've reached 90% of your set torque, and a steady tone sounds once you've hit your target. Set your torque in cNm, cm-Kg, or in.-lbs. and quickly check the LCD for real-time measurements along the way. A red light warns if you begin to overtighten.

Also known as impact-free torque screwdrivers, these tools minimize reaction force when the set torque is reached. They reduce user fatigue when installing many fasteners in a short period of time.

When working in tight spaces, these short drivers fit where others can't. They're factory set to ensure you reach the same torque every time.

Rated for ISO Class 5 (Fed. Std. Class 100) clean rooms, these tools have a sealed handle to keep lubrication in and contaminants out. Factory-set screwdrivers ensure you reach the same torque every time.

The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver.

The motor shuts off when the set torque is reached to prevent overtightening and damaging fasteners. These tools provide the most torque control of any electric screwdriver.

Finger-tighten the three-jaw chuck onto a torque wrench or screwdriver, then twist either the gauge or tool to check the tool’s accuracy.

Accurate to within ±1%, these torque testers are often used to check the accuracy of torque wrenches and screwdrivers on assembly lines.

Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers.

Calibrate torque-limiting power tools such as air-powered and impact drivers.