We will reply to your message within an hour.
Mount along a wall or other vertical surface.
These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.
Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.
Use these carriages and guide rails for light loads where precise movement is not required.
V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.
Nylon rollers provide low-friction movement for light loads and corrosive environments.
High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.
Combine with a T-slotted rail to add linear motion to your assembly.
Support loads while guiding and positioning work with these steel rollers and guide rails.
Nylon rollers and aluminum rails make these good for light duty applications.
Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails.
Mount to vertical surfaces for applications where tight tolerances aren't required.
A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem.
Create a self-aligning system that can be locked in place with these carriages and guide rails.
Compensate for rail misalignment in low-clearance applications with these carriages and guide rails.
Use these rails with any track rollers that have a 90° V-groove.