With the push of a button, the electric hydraulic lift raises the drum and a chute controls the flow of the material being dispensed to prevent splashes and spills. A clamp on each side of the chute secures the drum. Handlers have a handheld pendant switch and operate only when the push-buttons are engaged. A limit switch turns off the motor when the drum reaches the maximum height. Load will not drop in the event of a power failure. Screw-down floor locks keep handlers stationary during operation.

Warning: Never use to lift people or items over people.

These dispensers mount to the forks of a forklift for lifting and transport, plus they pivot for manual tilting so dispensing is easy. The band clamps around the drum and is secured with a latch.

Warning: Never use to lift people or items over people.

Instead of tilting these trucks during transport, push on the handle to lift a drum straight off the ground and move it easily over obstacles. Push the handle down to tilt the drum and dispense. They are suited for long distance moves and are easier to move than mobile drum dispensing stands. Trucks have a drum saddle with a chain and ratchet-style tightener to secure the drum. A handle lock prevents unintentional lowering and a tilt lock keeps the drum vertical. Release the tilt lock for mixing. The rear swivel caster makes them easy to steer. Their lightweight polypropylene wheels roll best on smooth surfaces.

Slide these dispensers onto the forks of a forklift to raise a drum, then use the hand chain to tilt and drain it from up to 10 feet away. Drums can rotate 360° in either direction. Chains or straps with ratchet-style tighteners secure the drums. Note: In half-full drums contents shift, which reduces capacity.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Tilt brakes prevent the drum from tilting when not in use.

Bracket kits for fiber and plastic drums retrofit Style A dispensers to have the same capabilities as Style B dispensers. They bolt onto the side of the drum saddle and clamp to the top and bottom of the drum to give the dispenser enough stability to be used with rimless plastic and fiber drums.

Warning: Never use to lift people or items over people.

From the comfort of your forklift, just push a button to dispense heavy drums into large containers, vats, and hoppers. The battery-powered tilt offers greater precision than a manual tilt for a smoother, more controlled pour. You can rotate drums 180° in either direction. It takes about 15 seconds to fully invert them. On a single charge, you’ll be able to empty about 70 drums. These dispensers slide onto your forklift forks and secure with thumb screws. A chain with a ratchet-style tightener holds the drum in place.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Bracket kits for fiber and plastic drums bolt onto the side of the drum saddle and clamp to the top and bottom of the drum. They give the dispenser enough stability to be used with rimless plastic and fiber drums.

Note: Contents shift in half-full drums, which reduces capacity.

Warning: Never use to lift people or items over people.

Raise, transport, tilt, and drain full drums using the hook of a crane or hoist. A lock on each side of the frame keeps the drum vertical or horizontal during transport.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Tilt brakes hold your drum in place if chain is released.

Fork pockets allow these lifters to be moved with a forklift.

Bracket kits for fiber and plastic drums bolt onto the side of the drum saddle and clamp to the top and bottom of the drum. They give the lifter enough stability to be used with rimless plastic and fiber drums.

Note: In half-full drums contents shift, which reduces capacity.

Warning: Never use to lift people or items over people.

Also known as drum cradles, these stands are an economical way to store, mix, and drain drums in a single location. The frame has a skid-resistant surface to prevent sliding when loading. A drum rim catch in the base of the frame secures the drum.

Note: Length for stand with telescoping handle is with handle in the retracted position.

A second set of axle-mounted wheels offers better load support and stability to handle heavy loads over longer distances. Trucks cradle the drum during transport and are designed to stand upright on their own. Load wedges slide under the drum for easy loading. All trucks have a rim catch that clamps to the top of the drum to secure it.