Nylon Travel-Limiting Lanyards

Filter by

Connection Hardware

Carabiner

D-Ring

Detachable Elastic Loop

Elastic Loop

Retractable Detachable Elastic Loop

Weight Capacity

Length

Material

Kevlar/UHMW Polyethylene

Construction

Component

Tool Attachment Point

Tool Lanyards

Number of Tools

DFARS Specialty Metals

Exempt

REACH

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Specifications Met

RoHS

Carabiner Material

Diameter

Housing Material

Tool Type

Lanyard Style

For Minimum Tool Opening

Attachment Method

Retracted Length

Application

Extended Length

Ring Inside Length

Ring Inside Width

Ring Movement

29 Products

Retractable Tool Lanyards

Keep tools within reach when you need them and out of the way when you don’t—these lanyards retract to prevent snags and tangles. They meet ANSI/ISEA 121, which certifies that their design keeps your tool from falling and harming people and equipment below when you’re working at height. An extension lock on these lanyards keeps it retracted until you’re ready to use it. To properly tether your tool, you’ll need an attachment point on your tool and an anchor point for your lanyard

For Hand Tools


	Belt Clip × Detachable Elastic Loop	Carabiner × Carabiner

Detachable-Elastic-Loop Connection—Lanyards with a detachable elastic loop let you swap out tools while leaving the anchor and lanyard setup in place.

	Lanyards														Replacement Detachable Elastic Loops
	Connection Type	For No. of Tools	Wt. Cap., lb.	Retracted Lg.	Extended Lg.	Material	Housing Material	For Min. Tool Opening	For Max. Belt Wd.	Carabiner Material	Features	Specs. Met		Each	Pkg. Qty.		Pkg.
Rope



		Belt Clip × Detachable Elastic Loop	1	2	9"	50"	Nylon	Plastic	1/4"	2 1/4"	—	Cord Lock, Extension Lock	ANSI/ISEA 121	8448N113	000000	3	8448N114	000000


		Carabiner × Carabiner	1	4	12 1/2"	50"	Nylon	Plastic	1/4"	—	Stainless Steel	Extension Lock	ANSI/ISEA 121	8448N115	00000	—	———	0

Tool Lanyards

Tether your tools to prevent accidental drops that could injure people and damage equipment below. These lanyards meet ANSI/ISEA 121 for design and performance to ensure safety when working at height. To properly tether your tool, you’ll need an attachment point on your tool and an anchor point for your lanyard.

For Hand Tools

Hand Tool Not Included


Elastic Loop	Detachable Elastic Loop	Carabiner for 1 Tool (Straight)

Carabiners for 2 Tools	Carabiner for 1 Tool (Coiled)	Webbing Loop

Lanyards for hand tools are the standard option—they can be used on most tools in your toolbox.

Straight Lanyard—Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement.

Coil Lanyard—Coil lanyards stretch to their full length and then return to their retracted length when you let go to prevent snags and tangles.

Detachable-Elastic-Loop Connection—Lanyards with a detachable elastic loop let you swap out tools while leaving the anchor and lanyard setup in place.

	Lanyards													Replacement Detachable Elastic Loops
	Connection Type	For No. of Tools	Wt. Cap., lb.	Lg.	Retracted Lg.	Extended Lg.	Material	For Min. Tool Opening	Carabiner Material	Features	Specs. Met		Each	Pkg. Qty.		Pkg.
Straight—Webbing



		Carabiner × Elastic Loop	1	10	35"	—	—	Nylon	3/8"	Aluminum	Cord Lock	ANSI/ISEA 121	1009N11	000000	—	———	0


		Carabiner × Detachable Elastic Loop	1	5	38"	—	—	Nylon	3/8"	Aluminum	Cord Lock	ANSI/ISEA 121	1009N31	00000	3	1009N41	00000
		Carabiner × Carabiner	1	10	35"	—	—	Nylon	1/4"	Aluminum	—	ANSI/ISEA 121	1009N21	00000	—	———	0
		Carabiner × Carabiner × Carabiner	2	15	35"	—	—	Nylon	1/4"	Stainless Steel	—	ANSI/ISEA 121	1009N71	00000	—	———	0


		Coil—Webbing



				Carabiner × Webbing Loop	1	25	—	42"	109"	Nylon	3/8"	Stainless Steel	—	ANSI/ISEA 121	1009N15	00000	—	———	0


				Carabiner × Carabiner	1	25	—	55"	112"	Nylon	3/8"	Stainless Steel	—	ANSI/ISEA 121	1009N16	00000	—	———	0

For Power Tools

Power Tool Not Included

Lanyards for power tools wrap around the battery and base to hold the tool securely.

Straight Lanyard—Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement.

	For No. of Tools	Wt. Cap., lb.	Lg.	Material	For Min. Tool Opening	Carabiner Material	Specs. Met		Each
Straight—Webbing



	Carabiner × Webbing Loop	1	10	38"	Nylon	7/16"	Aluminum	ANSI/ISEA 121	1009N13	000000

For Tape Measures

Tape Measure Not Included

Lanyards for tape measures wrap securely around all four sides while leaving the tape accessible.

Straight Lanyard—Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement.

	For No. of Tools	Wt. Cap., lb.	Lg.	Material	For Min. Tool Opening	Carabiner Material	Specs. Met		Each
Straight—Webbing



	Carabiner × Webbing Loop	1	2	38"	Nylon	7/16"	Aluminum	ANSI/ISEA 121	1009N14	000000

Tool Tether Attachments

Tether almost any tool—these attachments add a ring for a lanyard connection. When used together with a lanyard and an anchor, they prevent tools from accidentally falling and hurting someone or damaging equipment below.

Tape-On Attachment


	Attachment

Tape-on attachments work for almost any tool. Use them on screwdrivers, pliers, and other hand tools. Loop the webbing with a D-ring around your tool, cinch it tight, and secure with tape (sold separately). The flexible tape molds to surfaces of different shapes and sizes.

ANSI/ISEA 121—They meet ANSI/ISEA 121 for design and performance to ensure safety when working at height.

	Tool Tether Attachments										Tool Tether Attachment Tape
	Wt. Cap., lb.	Ring Inside Wd.	Ring Inside Lg.	For No. of Tools	Material	Construction	Specs. Met	Pkg. Qty.		Pkg.		Each
Rigid Ring



		5	1"	0.94"	1	Nylon	Webbing	ANSI/ISEA 121	3	9860N22	000000	9860N25	000000


		10	1"	0.94"	1	Nylon	Webbing	ANSI/ISEA 121	3	9860N23	00000	9860N25	00000
		15	1"	0.94"	1	Nylon	Webbing	ANSI/ISEA 121	1	9860N24	0000	9860N25	00000


		Swivel Ring



				5	0.55"	0.45"	1	Nylon	Webbing	ANSI/ISEA 121	3	9860N19	00000	9860N25	00000


				15	0.53"	0.54"	1	Nylon	Webbing	ANSI/ISEA 121	3	9860N21	00000	9860N25	00000

Fall-Rescue Packs

Clip these lightweight packs onto your fall-arrest harness so you can lower yourself to safety after a fall. They have a D-ring where you can attach your fall-arrest lanyard and 50 ft. of rope coiled inside. If you’re left hanging after a fall, pull the red tab on the shoulder and the pack will gradually release the rope for a controlled descent to the ground. A complete fall-arrest system includes a lanyard, harness, and anchor. When used together with a fall-arrest system, these packs meet OSHA and ANSI safety standards.

		Rope
Material	D-Ring Location (No. of)	Lg., ft.	Material	Construction	Wt. Cap., lb.	Specs. Met	Features		Each
Nylon	Back (1)	50	Aramid Fabric	Braided	310	ANSI/ASSP Z359.9, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9856N11	000000000

Rescue Poles

Image of Product. Front orientation. Retrievers.

Use rescue poles to assist a teammate who’s injured or unconscious. They come with a carabiner and a rope, so you can hook the tab on their pack, pull it, and lower them to the ground.

			Rope			Carabiner
Extended Lg., ft.	Retracted Lg., ft.	Material	Lg., ft.	Material	Construction	Opening Wd.	Material	Wt. Cap., lb.	Includes		Each
10	2	Aluminum	12	Polypropylene	Braided	13/16"	Aluminum	310	Carabiner, Carrying Case with RFID Tag, Rope	9856N12	0000000

Positioning Travel-Limiting Lanyards


Lanyard	Lanyard with Position Lock	Lanyard with Positioning Lock

Tether yourself close to your work so your hands are free to use tools and equipment. These lanyards clip to your harness’s hip D-rings, allowing you to keep a stable working stance on the sides of vertical structures.

Not for use as fall-arrest equipment alone. Add them to a complete fall-arrest system, which includes a fall-arrest lanyard, harness, and anchor.

Travel-Limiting Lanyards with Position Lock—Lanyards with a position lock let you adjust how far or close you are to your work and then lock it in place. A cover protects the lanyard from wear to extend its life.

					Snap Hook		Carabiner
	Lg., ft.	Material	Construction	Connection Hardware	Material	Opening Size	Material	Opening Wd.	Wt. Cap., lb.	Specs. Met		Each
Travel-Limiting Lanyards with Position Lock



		2 to 6 1/2	Nylon	Rope	Snap Hook × Carabiner	Steel	1 1/4"	Steel	2 1/4"	425	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	9884N111	0000000

Tool Tether Anchors


Slide On	Wraparound with Extra-Wide D-Ring

Clip your tool’s lanyard to these anchors while working at height—they prevent tools from falling and hurting someone or damaging equipment below. You’ll need an attachment point on your tool and a lanyard to properly tether your tool.

Slide On—Slide-on anchor points attach to your harness or tool belt. They’re a good choice for anchoring hand tools.

Wraparound with Extra-Wide D-Ring—Wraparound anchor points with an extra-wide D-ring work well when you need to swap between multiple tools. You can attach up to five tool lanyards.

Nylon Cover—A nylon cover protects the webbing from rubbing and scraping for an extended lifespan.

ANSI/ISEA 121—To ensure safety, they meet ANSI/ISEA 121 for design and performance.

	For No. of Tools	Connection Hardware	Material	Cover Material	Construction	For Max. Dia.	Specs. Met		Each
Slide On



	15	1	D-Ring	Nylon	—	Webbing	2 1/2"	ANSI/ISEA 121	9865N11	00000


	Wraparound with Extra-Wide D-Ring



			50	5	D-Ring	Nylon	Nylon	Webbing	6"	ANSI/ISEA 121	9865N12	00000

Wrist Tool Lanyards


Wristband × Elastic Loop	Wristband × Detachable Elastic Loop

Wristband × Retractable Detachable Elastic Loop	Wristband × Carabiner

Tethered to your wrist, your tools will always be within reach. When working at height, these lanyards prevent accidental drops that could harm people and damage equipment below. They meet ANSI/ISEA 121 for design and performance to ensure safety. To properly tether your tool, you’ll need an attachment point on your tool.

Detachable-Elastic-Loop Connection—Lanyards with a detachable elastic loop let you quickly disconnect tools from the wristband—no need to undo the loop. Add more detachable loops (sold separately) so you can have other tools ready to snap in.

	Lanyards														Replacement Detachable Elastic Loops
	Connection Type	For No. of Tools	Wt. Cap., lb.	Lg.	Retracted Lg.	Extended Lg.	Material	For Min. Tool Opening	For Max. Wrist Circumference	Carabiner Material	Features	Specs. Met		Each	Pkg. Qty.		Pkg.
Straight—Rope



		Wristband × Elastic Loop	1	5	10"	—	—	Nylon	7/64"	10 1/4"	—	Cord Lock	ANSI/ISEA 121	9794N11	00000	—	———	0


		Wristband × Detachable Elastic Loop	1	5	10"	—	—	Nylon	3/16"	10 1/4"	—	Cord Lock	ANSI/ISEA 121	9794N12	00000	3	9794N14	000000
		Wristband × Retractable Detachable Elastic Loop	1	1	—	8 1/2"	46"	Nylon	9/32"	10 1/4"	—	Cord Lock	ANSI/ISEA 121	9794N13	00000	3	9794N15	00000


		Straight—Webbing



				Wristband × Carabiner	1	5	7"	—	—	Nylon	1/2"	10"	Aluminum	—	ANSI/ISEA 121	9794N16	00000	—	———	0