Plastic Travel-Limiting Lanyards

Filter by

Length

Weight Capacity

Material

Kevlar/UHMW Polyethylene

Construction

Quick-Stop Lanyard Class

Class 1

Class 2

Number of Anchor End Connections

Anchor End Connection Hardware

Cab-Mount Bracket

Carabiner

Carabiner with Swivel Eye

D-Ring

Snap Hook

Snap Hook with Swivel Eye

Anchor Point Attachment Method

Component

Tool Attachment Point

Specifications Met

Connection Hardware

Detachable Elastic Loop

Elastic Loop

Elastic Strap with Cinching Buckle

Retractable Detachable Elastic Loop

Performance

Weight

Application

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Snap Hook Opening Size

REACH

Harness End Connection Hardware

Carabiner with Swivel Eye

Pin Retainer

Snap Hook

Snap Hook with Swivel Eye

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Compliant with Exemptions

Housing Material

Harness Size

Anchor End Connector Material

Aluminum

Stainless Steel

Steel

Harness End Connector Material

Thigh Buckle Type

91 Products

Quick-Stop Retracting Fall-Arrest Lanyards


1 Anchor End Connection, Webbing	1 Anchor End Connection, Wire Rope	2 Anchor End Connections, Webbing	2 Anchor End Connections, Wire Rope

Move freely, but limit how far you drop if you fall while working at height. These lanyards extend and retract as you move around to keep the slack out of your way. But with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness and an anchor, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards. Use them when your anchor is above, level with, or up to 5 ft. below your D-ring. They meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards hold up to abrasion better than webbing lanyards for a longer lifespan. They also resist corrosion.

Cab-Mount Bracket—Lanyards with a cab-mounting bracket have a curved top that slides along the rail of your vehicle, so you can move freely.

Impact-Indicating Stitching—Lanyards with impact indicator stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned during inventory and inspections to make tracking easy.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1







				1 Anchor End Connection

				6	Polyester Plastic	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T13	0000000


				6	Polyester Plastic	Webbing	Snap Hook	Aluminum	Carabiner with Swivel Eye	Steel	3/4"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching, Lightweight Hardware	9363N117	000000
				6	Polyester Plastic	Webbing	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	9363N116	000000
				6	UHMW Polyethylene	Webbing	Snap Hook	Steel	Cab-Mount Bracket	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N111	000000
				11	UHMW Polyethylene	Webbing	Snap Hook	Steel	Cab-Mount Bracket	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	9363N112	000000
				11	UHMW Polyethylene	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	—	8091T45	000000
				11	UHMW Polyethylene	Webbing	Snap Hook	Aluminum	Carabiner with Swivel Eye	Aluminum	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching, Lightweight Hardware	9363N118	000000
				20	UHMW Polyethylene	Webbing	Snap Hook	Steel	Carabiner	Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T91	000000
				25	—	Wire Rope	Snap Hook with Swivel Eye	Stainless Steel	Carabiner	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip, RFID Tag	8091T85	000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	8091T25	000000


						Class 2







										1 Anchor End Connection

										6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N123	000000


										6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook with Swivel Eye	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N124	000000
										8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N115	000000
										8	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Hardware, UV Resistant	9363N119	000000
										8	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook with Swivel Eye	Steel	2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Hardware, UV Resistant	9363N121	000000
										9	Polyester Plastic	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T44	000000
										20	Galvanized Steel	Wire Rope	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N113	000000
										50	Galvanized Steel	Wire Rope	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N114	000000




												2 Anchor End Connections

												6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N125	000000


												6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook with Swivel Eye	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N126	000000
												8	Galvanized Steel	Wire Rope	Pin Retainer	Aluminum	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Hardware	9363N122	000000

Tethering Travel-Limiting Lanyards

1 Anchor End Connection

2 Anchor End Connections

Keep a safe distance from fall hazards—these lanyards link you to an anchor point to limit your movement. They’re also known as travel restraint lanyards. Use them with a belt and fall-arrest anchor for a complete fall-prevention system. Not for use as fall-arrest equipment.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in one location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchor points while staying safely tethered at all times. Attach to the new anchor point before disconnecting from the other anchor point.

					Snap Hook
	Lg., ft.	Material	Construction	Connection Hardware	Material	Opening Size	Wt. Cap., lb.	Specs. Met		Each
1 Anchor End Connection



		6	Polyester Plastic	Webbing	Snap Hook × Snap Hook	Steel	5/8"	310	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	8227T34	000000


		6	Polyester Plastic	Webbing	Snap Hook × Snap Hook	Steel	1 7/8", 2 3/4"	425	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	8227T111	00000
		6 to 10	Polyester Plastic	Webbing	Snap Hook × Snap Hook	Steel	5/8"	310	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	8227T44	00000


		2 Anchor End Connections



				6	Polyester Plastic	Webbing	Snap Hook × Snap Hook × Snap Hook	Steel	1 7/8"	425	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	8227T112	00000

Shock-Absorbing Fall-Arrest Lanyards


1 Anchor End Connection Webbing	1 Anchor End Connection Wire Rope

2 Anchor End Connections Webbing	2 Anchor End Connections Webbing

If you fall when working at height, these lanyards extend to slow and stop your fall. However, you'll fall farther than you would with a quick-stop lanyard. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.

1 Anchor End Connection—Lanyards with 1 anchor end connection are for working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards are durable and resist abrasion, so they won’t fray or snap if you fall over a sharp edge. They have a bright green plastic coating to make damage obvious during inspections.

Impact-Indicating Stitching—Lanyards with impact-indicating stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned to log inspections, track usage, and schedule maintenance to keep your lanyard compliant with safety regulations.

					Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Coating Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met	Features		Each
1 Anchor End Connection







				Abrasion Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T214	000000




						Shock Absorbing Webbing

						3	7	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 3/8"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	—	8168T211	00000


						6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T772	00000
						4 to 6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T16	00000


						2 Anchor End Connections







										Abrasion Resistant, Shock Absorbing Wire Rope

										6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T215	00000




												Shock Absorbing Webbing

												3	7	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	—	8168T212	00000


												6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	UV Resistant	8168T213	00000
												4 to 6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T51	00000

Quick-Stop Retracting Fall-Arrest Lanyards with Alarms

Like an alarm on your car dashboard, these lanyards flash and beep until you're clipped into fall protection on an order picker or other vehicle. They come with a Bluetooth sensor that pairs with the lanyard carabiner. Together they detect when you're onboard and clipped into the anchor point. Compatible with most order pickers, the sensor mounts to the cab of your vehicle and hooks into its wiring for power.

These lanyards extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. These lanyards are Class 1, so they work with D-rings that are at the same level as or below your anchor. When used together with an anchor and a harness, these lanyards help you meet OSHA and ANSI safety standards.

An RFID tag makes these lanyards easy to track during inventory and inspections.

Class 1

			Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Wt. Cap., lb.	Housing Material	Batteries Included	Specs. Met	Includes	Features		Each
1 Anchor End Connection







				Webbing

				6	UHMW Polyethylene	Carabiner with Swivel Eye	Aluminum	Carabiner with Swivel Eye	Steel	3/4", 13/16"	310	Plastic	Yes	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Bluetooth Sensor, Cable Ties, LED Light Strips, Sensor Power Cable with Wire Leads	Lightweight Hardware, RFID Tag	9366N101	000000000

Retractable Tool Lanyards

Keep tools within reach when you need them and out of the way when you don’t—these lanyards retract to prevent snags and tangles. They meet ANSI/ISEA 121, which certifies that their design keeps your tool from falling and harming people and equipment below when you’re working at height. An extension lock on these lanyards keeps it retracted until you’re ready to use it. To properly tether your tool, you’ll need an attachment point on your tool and an anchor point for your lanyard

For Hand Tools


	Belt Clip × Detachable Elastic Loop	Carabiner × Carabiner

Detachable-Elastic-Loop Connection—Lanyards with a detachable elastic loop let you swap out tools while leaving the anchor and lanyard setup in place.

	Lanyards														Replacement Detachable Elastic Loops
	Connection Type	For No. of Tools	Wt. Cap., lb.	Retracted Lg.	Extended Lg.	Material	Housing Material	For Min. Tool Opening	For Max. Belt Wd.	Carabiner Material	Features	Specs. Met		Each	Pkg. Qty.		Pkg.
Rope



		Belt Clip × Detachable Elastic Loop	1	2	9"	50"	Nylon	Plastic	1/4"	2 1/4"	—	Cord Lock, Extension Lock	ANSI/ISEA 121	8448N113	000000	3	8448N114	000000


		Carabiner × Carabiner	1	4	12 1/2"	50"	Nylon	Plastic	1/4"	—	Stainless Steel	Extension Lock	ANSI/ISEA 121	8448N115	00000	—	———	0

Self-Rescue Fall-Arrest Harnesses

Squeeze-Release Thigh

Buckle

Lower yourself to safety after a fall. These harnesses are designed for solo work or remote locations where rescue teams can't reach you. Attach a lanyard to the D-ring on the back, and if you fall, these harnesses will keep you upright. For a controlled descent to the ground, pull the tab on the shoulder to unfurl the 65 ft. rope. Padding on the back and shoulders makes these harnesses comfortable, even when worn for long periods. When used together with a lanyard and anchor, they help you meet OSHA and ANSI safety standards.

With Back and Shoulder Padding

							Rope
	Harness Size	For Ht. Range	For Wt., lb.	Waist Size	Harness Material	D-Ring Location (No. of)	Lg., ft.	Material	Construction	Wt. Cap., lb.	Specs. Met		Each
Front-Buckle Harnesses—Squeeze-Release Thigh Buckle



		M/L	64" to 77"	150 to 225	32" to 48"	Polyester Plastic	Back (1)	65	Aramid Fabric	Braided	310	ANSI/ASSP Z359.4, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140	9780N101	000000000


		XL	64" to 78"	225 to 300	36" to 52"	Polyester Plastic	Back (1)	65	Aramid Fabric	Braided	310	ANSI/ASSP Z359.4, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140	9780N102	00000000

Rescue Poles

Use rescue poles to assist a teammate who needs help. Reach up with the pole to attach the included carabiner and rope to someone’s harness, then pull on the rope to guide your teammate to the ground.

			Rope		Carabiner
Extended Lg., ft.	Retracted Lg., ft.	Material	Lg., ft.	Material	Opening Wd.	Material	Wt. Cap., lb.	Includes		Each
11	2 1/2	Aluminum	11	Nylon	3/4"	Aluminum	5,000	Carabiner, Rope, Storage Bag	9780N104	0000000

Tool Lanyards

Tether your tools to prevent accidental drops that could injure people and damage equipment below. These lanyards meet ANSI/ISEA 121 for design and performance to ensure safety when working at height. To properly tether your tool, you’ll need an attachment point on your tool and an anchor point for your lanyard.

For Hand Tools

Hand Tool Not Included


Elastic Loop	Detachable Elastic Loop	Carabiner for 1 Tool (Straight)

Carabiners for 2 Tools	Carabiner for 1 Tool (Coiled)	Webbing Loop

Lanyards for hand tools are the standard option—they can be used on most tools in your toolbox.

Straight Lanyard—Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement.

Coil Lanyard—Coil lanyards stretch to their full length and then return to their retracted length when you let go to prevent snags and tangles.

Detachable-Elastic-Loop Connection—Lanyards with a detachable elastic loop let you swap out tools while leaving the anchor and lanyard setup in place.

	Lanyards													Replacement Detachable Elastic Loops
	Connection Type	For No. of Tools	Wt. Cap., lb.	Lg.	Retracted Lg.	Extended Lg.	Material	For Min. Tool Opening	Carabiner Material	Features	Specs. Met		Each	Pkg. Qty.		Pkg.
Straight—Webbing



		Carabiner × Elastic Loop	1	10	35"	—	—	Nylon	3/8"	Aluminum	Cord Lock	ANSI/ISEA 121	1009N11	000000	—	———	0


		Carabiner × Detachable Elastic Loop	1	5	38"	—	—	Nylon	3/8"	Aluminum	Cord Lock	ANSI/ISEA 121	1009N31	00000	3	1009N41	00000
		Carabiner × Carabiner	1	10	35"	—	—	Nylon	1/4"	Aluminum	—	ANSI/ISEA 121	1009N21	00000	—	———	0
		Carabiner × Carabiner × Carabiner	2	15	35"	—	—	Nylon	1/4"	Stainless Steel	—	ANSI/ISEA 121	1009N71	00000	—	———	0


		Coil—Webbing



				Carabiner × Webbing Loop	1	25	—	42"	109"	Nylon	3/8"	Stainless Steel	—	ANSI/ISEA 121	1009N15	00000	—	———	0


				Carabiner × Carabiner	1	25	—	55"	112"	Nylon	3/8"	Stainless Steel	—	ANSI/ISEA 121	1009N16	00000	—	———	0

For Power Tools

Power Tool Not Included

Lanyards for power tools wrap around the battery and base to hold the tool securely.

Straight Lanyard—Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement.

	For No. of Tools	Wt. Cap., lb.	Lg.	Material	For Min. Tool Opening	Carabiner Material	Specs. Met		Each
Straight—Webbing



	Carabiner × Webbing Loop	1	10	38"	Nylon	7/16"	Aluminum	ANSI/ISEA 121	1009N13	000000

For Tape Measures

Tape Measure Not Included

Lanyards for tape measures wrap securely around all four sides while leaving the tape accessible.

Straight Lanyard—Straight lanyards have elastic in the webbing that stretches a little as you use your tool for ease of movement.

	For No. of Tools	Wt. Cap., lb.	Lg.	Material	For Min. Tool Opening	Carabiner Material	Specs. Met		Each
Straight—Webbing



	Carabiner × Webbing Loop	1	2	38"	Nylon	7/16"	Aluminum	ANSI/ISEA 121	1009N14	000000

Tool Tether Attachments

Tether almost any tool—these attachments add a ring for a lanyard connection. When used together with a lanyard and an anchor, they prevent tools from accidentally falling and hurting someone or damaging equipment below.

Tape-On Attachment


	Attachment

Tape-on attachments work for almost any tool. Use them on screwdrivers, pliers, and other hand tools. Loop the webbing with a D-ring around your tool, cinch it tight, and secure with tape (sold separately). The flexible tape molds to surfaces of different shapes and sizes.

ANSI/ISEA 121—They meet ANSI/ISEA 121 for design and performance to ensure safety when working at height.

	Tool Tether Attachments										Tool Tether Attachment Tape
	Wt. Cap., lb.	Ring Inside Wd.	Ring Inside Lg.	For No. of Tools	Material	Construction	Specs. Met	Pkg. Qty.		Pkg.		Each
Rigid Ring



		5	1"	0.94"	1	Nylon	Webbing	ANSI/ISEA 121	3	9860N22	000000	9860N25	000000


		10	1"	0.94"	1	Nylon	Webbing	ANSI/ISEA 121	3	9860N23	00000	9860N25	00000
		15	1"	0.94"	1	Nylon	Webbing	ANSI/ISEA 121	1	9860N24	0000	9860N25	00000


		Swivel Ring



				5	0.55"	0.45"	1	Nylon	Webbing	ANSI/ISEA 121	3	9860N19	00000	9860N25	00000


				15	0.53"	0.54"	1	Nylon	Webbing	ANSI/ISEA 121	3	9860N21	00000	9860N25	00000

Fall-Rescue Packs

Clip these lightweight packs onto your fall-arrest harness so you can lower yourself to safety after a fall. They have a D-ring where you can attach your fall-arrest lanyard and 50 ft. of rope coiled inside. If you’re left hanging after a fall, pull the red tab on the shoulder and the pack will gradually release the rope for a controlled descent to the ground. A complete fall-arrest system includes a lanyard, harness, and anchor. When used together with a fall-arrest system, these packs meet OSHA and ANSI safety standards.

		Rope
Material	D-Ring Location (No. of)	Lg., ft.	Material	Construction	Wt. Cap., lb.	Specs. Met	Features		Each
Nylon	Back (1)	50	Aramid Fabric	Braided	310	ANSI/ASSP Z359.9, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9856N11	000000000

Rescue Poles

Image of Product. Front orientation. Retrievers.

Use rescue poles to assist a teammate who’s injured or unconscious. They come with a carabiner and a rope, so you can hook the tab on their pack, pull it, and lower them to the ground.

			Rope			Carabiner
Extended Lg., ft.	Retracted Lg., ft.	Material	Lg., ft.	Material	Construction	Opening Wd.	Material	Wt. Cap., lb.	Includes		Each
10	2	Aluminum	12	Polypropylene	Braided	13/16"	Aluminum	310	Carabiner, Carrying Case with RFID Tag, Rope	9856N12	0000000

Hard Hat Lanyards

Attach to your hard hat to prevent accidental drops. These lanyards meet ANSI/ISEA 121, which certifies that their design keeps your hard hat from falling and harming people and equipment below.

Lg.	Material	Construction	Connection Type	Specs. Met		Each
23 1/4"	Polyester/Rubber	Webbing	Elastic Strap with Cinching Buckle × Cinching Buckle	ANSI/ISEA 121	1009N81	00000

Retrieval Travel-Limiting Lanyards

Stay straight up and down while being raised and lowered through narrow spaces. These lanyards clip into your harness’s shoulder D-rings to keep you from pitching forward. Grab onto the bar so your arms won't get caught on anything as you pass through manholes and other openings.

Not for use as fall-arrest equipment alone. Add them to a complete fall-arrest system, which includes a lanyard, harness, and anchor.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Opening Size	Wt. Cap., lb.	Specs. Met		Each
2 Harness End Connections



		2 1/2	Polyester Plastic	Webbing	Snap Hook	Steel	D-Ring	Steel	7/8"	420	ANSI/ASSP Z117.1, ANSI/ASSP Z359.4, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9532N121	000000

Electrical Arc-Flash-Resistant Quick-Stop Retracting Fall-Arrest Lanyards

Made with a durable Kevlar webbing, these lanyards meet ASTM F887, so they're tested to hold up against arc flash hazards. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards—use them when your anchor is above your D-ring, at the same level, or up to 5 ft. below. They meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met		Each
Class 1







				1 Anchor End Connection

				6	Kevlar	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	1"	13/16"	Plastic	310	ANSI/ASSP Z359.14, ASTM F887, OSHA Compliant 29 CFR 1926.502	9536N11	0000000


				Class 2







								1 Anchor End Connection

								8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	13/16"	Plastic	420	ANSI/ASSP Z359.14, ASTM F887, OSHA Compliant 29 CFR 1926.502	9536N12	000000

Fall-Arrest Harnesses with Lanyards


		Quick-Stop Lanyard	Shock-Absorbing Lanyard

Belt Thigh Buckle

Stay ready for occasional work at height—these harnesses come with a lanyard. Store them in the included bag when not in use. When they’re used properly with an anchor (not included with all), they help you meet OSHA and ANSI safety standards.

Attach the lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall.

Impact-Indicating Stitching—Impact-indicating stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.

Quick Stop—Quick-stop lanyards, also known as SRLs, lock into place quickly to stop your fall in a shorter distance than shock-absorbing lanyards. The lanyard extends and retracts as you change position, giving you freedom to move while keeping the lanyard out of the way.

Shock Absorbing—Shock-absorbing lanyards are a good basic option. They have webbing that expands if you fall to reduce the impact on your body. They’re more lightweight than quick-stop lanyards.

		Lanyard										Anchor End Connection
	Performance	Lg., ft.	Lg. After Fall, ft.	Material	Construction	Harness Size	For Ht. Range	For Wt., lb.	Waist Size	Harness Material	D-Ring Location (No. of)	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met	Includes		Each
Front-Buckle Harnesses—Belt Thigh Buckle







				Impact-Indicating Stitching, Leg Support Handles

				Quick Stop	11	—	Polyester Fabric	Webbing	One Size	58" to 78"	110 to 320	32" to 50"	Polyester Plastic	Back (1)	Snap Hook	Steel	2"	310	ANSI/ASSP Z359.11, ANSI/ASSP Z359.14 Class 1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Lanyard, Storage Bag, Webbing Anchor Point	9291N12	0000000


				Shock Absorbing	6	10	Polyester Fabric	Webbing	One Size	58" to 78"	110 to 320	32" to 50"	Polyester Plastic	Back (1)	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.11, ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Lanyard, Storage Bag	9291N11	000000

Positioning Travel-Limiting Lanyards


Lanyard	Lanyard with Position Lock	Lanyard	Lanyard with Positioning Lock

Tether yourself close to your work so your hands are free to use tools and equipment. These lanyards clip to your harness’s hip D-rings, allowing you to keep a stable working stance on the sides of vertical structures.

Not for use as fall-arrest equipment alone. Add them to a complete fall-arrest system, which includes a fall-arrest lanyard, harness, and anchor.

Travel-Limiting Lanyards with Position Lock—Lanyards with a position lock let you adjust how far or close you are to your work and then lock it in place. A cover protects the lanyard from wear to extend its life.

					Snap Hook		Carabiner
	Lg.	Material	Construction	Connection Hardware	Material	Opening Size	Material	Opening Wd.	Wt. Cap., lb.	Specs. Met		Each
Travel-Limiting Lanyards



		22"	Polyester Plastic	Webbing	Snap Hook × Snap Hook × Snap Hook	Steel	1 1/4", 2 3/4", 1 1/4"	—	—	310	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	9884N112	000000


		Travel-Limiting Lanyards with Position Lock



				2 ft. to 6 1/2 ft.	Nylon	Rope	Snap Hook × Carabiner	Steel	1 1/4"	Steel	2 1/4"	425	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	9884N111	000000

Travel-Limiting Belts


1 D-Ring	2 D-Rings

Stay away from fall hazards. When anchored by a tethering lanyard, these belts limit your movement to keep you within safe working areas. They’re also known as travel restraint belts. Padding along the back adds support and reduces strain.

You will need a tethering lanyard, belt, and fall-arrest anchor for a complete fall-prevention system. Not for use as fall-arrest equipment.

Hips—Belts with D-rings on the hips are often used for work positioning.

D-Ring Location (No. of)	Material	Construction	D-Ring Material	Buckle Material	Wt. Cap., lb.	Specs. Met	Features	Choose a Size (Waist)		Each
Back (1)	Polyester Plastic	Webbing	Steel	Steel	310	OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.11	Padded Back	S (34" to 43"), M (38" to 47"), L (42" to 51"), XL (46" to 55")	8062T45	0000000
Hips (2)	Polyester Plastic	Webbing	Steel	Steel	310	OSHA Compliant 29 CFR 1910.140, ANSI/ASSP A10.32	Padded Back	S (32" to 40"), M (36" to 44"), L (40" to 48"), XL (44" to 52")	7920T54	00000

Tool Tether Anchors


Slide On	Wraparound	Wraparound with Extra-Wide D-Ring

Clip your tool’s lanyard to these anchors while working at height—they prevent tools from falling and hurting someone or damaging equipment below. You’ll need an attachment point on your tool and a lanyard to properly tether your tool.

Slide On—Slide-on anchor points attach to your harness or tool belt. They’re a good choice for anchoring hand tools.

Wraparound—Wraparound anchor points attach to rated structures such as railings and scaffolding. They support heavy tools without weighing you down.

Wraparound with Extra-Wide D-Ring—Wraparound anchor points with an extra-wide D-ring work well when you need to swap between multiple tools. You can attach up to five tool lanyards.

Nylon Cover—A nylon cover protects the webbing from rubbing and scraping for an extended lifespan.

ANSI/ISEA 121—To ensure safety, they meet ANSI/ISEA 121 for design and performance.

	For No. of Tools	Connection Hardware	Material	Cover Material	Construction	For Max. Dia.	Specs. Met		Each
Slide On



	15	1	D-Ring	Nylon	—	Webbing	2 1/2"	ANSI/ISEA 121	9865N11	00000


	Wraparound



			25	1	D-Ring	Polyester Plastic	—	Webbing	6"	ANSI/ISEA 121	9865N13	00000


			Wraparound with Extra-Wide D-Ring



					50	5	D-Ring	Nylon	Nylon	Webbing	6"	ANSI/ISEA 121	9865N12	00000

D-Ring Fall-Arrest Extension Straps

D-Ring × Snap Hook

Webbing

D-Ring × Webbing Loop

Webbing

Add length to your harness D-ring and make it easier to attach a fall-arrest lanyard.

Snap-Hook Connection—Snap hooks are easy to clip to your existing D-ring.

Webbing Loop Connection—Webbing loops are more lightweight than snap hooks. They wrap securely around your D-ring.

Impact-Indicating Stitching—Straps with impact-indicating stitching let you know at a glance if the strap has been weakened in a fall. The stitching pops or tears during an impact.

	Specs. Met	Features		Each
D-Ring × Snap Hook







	Webbing

	18"	Polyester Plastic	310	OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	1003N2	000000


	24"	Polyester Plastic	420	OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.11	—	1003N114	00000
	36"	Polyester Plastic	310	OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.3	Impact-Indicating Stitching	1003N115	00000


	D-Ring × Webbing Loop







					Webbing

					18"	Polyester Plastic	420	OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.11	—	1003N111	00000

Wrist Tool Lanyards


Wristband × Elastic Loop	Wristband × Detachable Elastic Loop

Wristband × Retractable Detachable Elastic Loop	Wristband × Carabiner

Tethered to your wrist, your tools will always be within reach. When working at height, these lanyards prevent accidental drops that could harm people and damage equipment below. They meet ANSI/ISEA 121 for design and performance to ensure safety. To properly tether your tool, you’ll need an attachment point on your tool.

Detachable-Elastic-Loop Connection—Lanyards with a detachable elastic loop let you quickly disconnect tools from the wristband—no need to undo the loop. Add more detachable loops (sold separately) so you can have other tools ready to snap in.

	Lanyards														Replacement Detachable Elastic Loops
	Connection Type	For No. of Tools	Wt. Cap., lb.	Lg.	Retracted Lg.	Extended Lg.	Material	For Min. Tool Opening	For Max. Wrist Circumference	Carabiner Material	Features	Specs. Met		Each	Pkg. Qty.		Pkg.
Straight—Rope



		Wristband × Elastic Loop	1	5	10"	—	—	Nylon	7/64"	10 1/4"	—	Cord Lock	ANSI/ISEA 121	9794N11	00000	—	———	0


		Wristband × Detachable Elastic Loop	1	5	10"	—	—	Nylon	3/16"	10 1/4"	—	Cord Lock	ANSI/ISEA 121	9794N12	00000	3	9794N14	000000
		Wristband × Retractable Detachable Elastic Loop	1	1	—	8 1/2"	46"	Nylon	9/32"	10 1/4"	—	Cord Lock	ANSI/ISEA 121	9794N13	00000	3	9794N15	00000


		Straight—Webbing



				Wristband × Carabiner	1	5	7"	—	—	Nylon	1/2"	10"	Aluminum	—	ANSI/ISEA 121	9794N16	00000	—	———	0

Quick-Stop Retracting Fall-Arrest Lanyards with Anchor


Hook Over	Wraparound


Hook-Over Anchor Point 1 Anchor End Connection	Hook-Over Anchor Point, 2 Anchor End Connections	Wraparound Anchor Point, 1 Anchor End Connection	Wraparound Anchor Point, 2 Anchor End Connections

Clip these lanyards onto a rated structure—they form their own anchor. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when the anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards. Use them when the anchor is above, level with, or up to 5 ft. below your D-ring. Since they're made with Kevlar webbing or wire rope, they meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

Hook-Over Anchor Point—Hook-over lanyards have a large snap hook, known as a rebar hook, that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach the new anchor point before disconnecting the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards hold up to abrasion better than webbing lanyards for a longer lifespan.

Anchored Housing—Lanyards with an anchored housing are easier on your back than other retracting lanyards, since the weight of the housing hangs on the anchor rather than your harness’s D-ring.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1—Hook Over







				1 Anchor End Connection

				6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T111	0000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T112	000000


						Class 1—Wraparound







										1 Anchor End Connection

										9	UHMW Polyethylene	Webbing	Carabiner with Swivel Eye	Steel	Snap Hook	Steel	2"	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	8091T884	000000


										Class 2—Hook Over







														1 Anchor End Connection

														8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T211	000000


														8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2 1/2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T883	000000




																2 Anchor End Connections

																8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T212	000000


																8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2 1/2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T313	000000


																Class 2—Wraparound







																		1 Anchor End Connection

																		8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T213	000000


		8	Kevlar															Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	1"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T311	000000




				2 Anchor End Connections

				8	Galvanized Steel													Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T214	000000


				8	Kevlar													Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	1"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T312	000000