OSHA Compliant 29 CFR 1910.140 Travel-Limiting Lanyards

Filter by

Length

Weight Capacity

Material

Anchor Point Attachment Method

Hook Over

Wraparound

Number of Anchor End Connections

Construction

Webbing

Wire Rope

Quick-Stop Lanyard Class

Class 1

Class 2

Anchor End Connection Hardware

Cab-Mount Bracket

Carabiner

Carabiner with Swivel Eye

D-Ring

Snap Hook

Snap Hook with Swivel Eye

Specifications Met

OSHA Compliant 29 CFR 1910.140

OSHA Compliant 29 CFR 1910.66

OSHA Compliant 29 CFR 1926.502

Component

Performance

Application

Weight

Harness End Connection Hardware

Carabiner with Swivel Eye

Pin Retainer

Snap Hook

Snap Hook with Swivel Eye

Housing Material

Harness Size

Connection Hardware

Snap Hook Opening Size

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Compliant with Exemptions

Not Compliant

Anchor End Connector Material

Stainless Steel

Steel

Harness End Connector Material

Waist Size

37 Products

Quick-Stop Retracting Fall-Arrest Lanyards


1 Anchor End Connection, Webbing	1 Anchor End Connection, Wire Rope	2 Anchor End Connections, Webbing

Move freely, but limit how far you drop if you fall while working at height. These lanyards extend and retract as you move around to keep the slack out of your way. But with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness and an anchor, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards. Use them when your anchor is above, level with, or up to 5 ft. below your D-ring. They meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards hold up to abrasion better than webbing lanyards for a longer lifespan. They also resist corrosion.

Cab-Mount Bracket—Lanyards with a cab-mounting bracket have a curved top that slides along the rail of your vehicle, so you can move freely.

Impact-Indicating Stitching—Lanyards with impact indicator stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned during inventory and inspections to make tracking easy.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1







				1 Anchor End Connection

				6	UHMW Polyethylene	Webbing	Snap Hook	Steel	Cab-Mount Bracket	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N111	0000000


				11	UHMW Polyethylene	Webbing	Snap Hook	Steel	Cab-Mount Bracket	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	9363N112	000000
				20	UHMW Polyethylene	Webbing	Snap Hook	Steel	Carabiner	Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T91	000000
				25	—	Wire Rope	Snap Hook with Swivel Eye	Stainless Steel	Carabiner	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip, RFID Tag	8091T85	000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	8091T25	000000


						Class 2







										1 Anchor End Connection

										6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N123	000000


										6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook with Swivel Eye	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N124	000000
										8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N115	000000
										20	Galvanized Steel	Wire Rope	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N113	000000
										50	Galvanized Steel	Wire Rope	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N114	000000




												2 Anchor End Connections

												6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N125	000000


												6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook with Swivel Eye	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N126	000000

Tethering Travel-Limiting Lanyards


	1 Anchor End Connection

Keep a safe distance from fall hazards—these lanyards link you to an anchor point to limit your movement. They’re also known as travel restraint lanyards. Use them with a belt and fall-arrest anchor for a complete fall-prevention system. Not for use as fall-arrest equipment.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in one location.

					Snap Hook
	Lg., ft.	Material	Construction	Connection Hardware	Material	Opening Size	Wt. Cap., lb.	Specs. Met		Each
1 Anchor End Connection



		6	Polyester Plastic	Webbing	Snap Hook × Snap Hook	Steel	5/8"	310	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	8227T34	000000


		6 to 10	Polyester Plastic	Webbing	Snap Hook × Snap Hook	Steel	5/8"	310	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	8227T44	00000

Harsh-Environment Quick-Stop Retracting Fall-Arrest Lanyards

No matter how dirty and wet a job gets at height, these lanyards are built to last and work fast. Made of stainless steel, the wire rope and housing withstand corrosive and grimy conditions. The housing, rated IP69K, is fully sealed to keep out dust and high-pressure water.

These lanyards extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. They’re Class 1, so they work with D-rings that are at the same level or below your anchor. When used together with an anchor and a harness, these lanyards help you meet OSHA and ANSI safety standards.

An RFID tag makes these lanyards easy to track during inventory and inspections.

Class 1

			Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Housing Material	Enclosure Rating	Specs. Met	Features		Each
1 Anchor End Connection







				Abrasion Resistant Wire Rope

				15	Stainless Steel	Snap Hook with Swivel Eye	Steel	Carabiner	Stainless Steel	3/4"	420	Stainless Steel	IP69K	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip, RFID Tag	9353N111	000000000


				50	Stainless Steel	Snap Hook with Swivel Eye	Stainless Steel	Carabiner	Stainless Steel	3/4"	420	Stainless Steel	IP69K	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip, RFID Tag	8091T57	00000000

Quick-Stop Retracting Fall-Arrest Lanyards with Alarms

Like an alarm on your car dashboard, these lanyards flash and beep until you're clipped into fall protection on an order picker or other vehicle. They come with a Bluetooth sensor that pairs with the lanyard carabiner. Together they detect when you're onboard and clipped into the anchor point. Compatible with most order pickers, the sensor mounts to the cab of your vehicle and hooks into its wiring for power.

These lanyards extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. These lanyards are Class 1, so they work with D-rings that are at the same level as or below your anchor. When used together with an anchor and a harness, these lanyards help you meet OSHA and ANSI safety standards.

An RFID tag makes these lanyards easy to track during inventory and inspections.

Class 1

			Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Wt. Cap., lb.	Housing Material	Batteries Included	Specs. Met	Includes	Features		Each
1 Anchor End Connection







				Webbing

				6	UHMW Polyethylene	Carabiner with Swivel Eye	Aluminum	Carabiner with Swivel Eye	Steel	3/4", 13/16"	310	Plastic	Yes	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Bluetooth Sensor, Cable Ties, LED Light Strips, Sensor Power Cable with Wire Leads	Lightweight Hardware, RFID Tag	9366N101	000000000

Self-Rescue Fall-Arrest Harnesses

Squeeze-Release Thigh

Buckle

Lower yourself to safety after a fall. These harnesses are designed for solo work or remote locations where rescue teams can't reach you. Attach a lanyard to the D-ring on the back, and if you fall, these harnesses will keep you upright. For a controlled descent to the ground, pull the tab on the shoulder to unfurl the 65 ft. rope. Padding on the back and shoulders makes these harnesses comfortable, even when worn for long periods. When used together with a lanyard and anchor, they help you meet OSHA and ANSI safety standards.

With Back and Shoulder Padding

							Rope
	Harness Size	For Ht. Range	For Wt., lb.	Waist Size	Harness Material	D-Ring Location (No. of)	Lg., ft.	Material	Construction	Wt. Cap., lb.	Specs. Met		Each
Front-Buckle Harnesses—Squeeze-Release Thigh Buckle



		M/L	64" to 77"	150 to 225	32" to 48"	Polyester Plastic	Back (1)	65	Aramid Fabric	Braided	310	ANSI/ASSP Z359.4, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140	9780N101	000000000


		XL	64" to 78"	225 to 300	36" to 52"	Polyester Plastic	Back (1)	65	Aramid Fabric	Braided	310	ANSI/ASSP Z359.4, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140	9780N102	00000000

Rescue Poles

Use rescue poles to assist a teammate who needs help. Reach up with the pole to attach the included carabiner and rope to someone’s harness, then pull on the rope to guide your teammate to the ground.

			Rope		Carabiner
Extended Lg., ft.	Retracted Lg., ft.	Material	Lg., ft.	Material	Opening Wd.	Material	Wt. Cap., lb.	Includes		Each
11	2 1/2	Aluminum	11	Nylon	3/4"	Aluminum	5,000	Carabiner, Rope, Storage Bag	9780N104	0000000

Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards


	2 Anchor End Connections

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc-flash-resistant harness. When used together with an anchor and harness, these lanyards help you meet OSHA and ANSI safety standards.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchor points while staying safely tethered at all times. Attach to the new anchor point before disconnecting from the other anchor point.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
2 Anchor End Connections







				Arc Flash Resistant, Shock Absorbing Webbing

				6	10	Kevlar	Snap Hook	Steel	Snap Hook	Steel	13/16"	310	ANSI/ASSP Z359.13, ASTM F887, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	1785T14	0000000

Fall-Rescue Kits


Descent Rescue	Descent Rescue Kits

Everything you need to rescue a person who is suspended after a fall, even if they're injured or unconscious. These kits come tucked in a storage bag, so you can spring into action at a moment’s notice. The storage bag repels water for protection from the weather.

These are not fall-arrest equipment. For a fall-arrest system, you’ll need a lanyard, harness, and anchor.

Descent Rescue—Use descent rescue kits to lower the suspended person to the ground. They include a pole that telescopes for extra reach with a carabiner holder and hook on the end. Use the pole to do a variety of things—install anchors, attach carabiners to a suspended person’s D-ring, or guide someone around obstacles as they descend. You can even use these kits to evacuate yourself from an elevated platform in emergencies such as a fallen ladder or a fire. The pockets on the backpack are labeled, so you’ll be able to find what you need quickly.

Application	Includes	Rope Lg., ft.	Wt. Cap., lb.	Specs. Met		Each
Descent Rescue	Backpack, Long Rope, Rescue Pole, Rescue Pole Storage Bag, Rescue Strap, Rescue/Descent Device with Handwheel, Rope Protector, Tool Lanyard, Two Carabiners, Webbing Anchor Point	150	620	ANSI/ASSP Z359.4, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9368N12	000000000

Fall-Rescue Packs

Clip these lightweight packs onto your fall-arrest harness so you can lower yourself to safety after a fall. They have a D-ring where you can attach your fall-arrest lanyard and 50 ft. of rope coiled inside. If you’re left hanging after a fall, pull the red tab on the shoulder and the pack will gradually release the rope for a controlled descent to the ground. A complete fall-arrest system includes a lanyard, harness, and anchor. When used together with a fall-arrest system, these packs meet OSHA and ANSI safety standards.

		Rope
Material	D-Ring Location (No. of)	Lg., ft.	Material	Construction	Wt. Cap., lb.	Specs. Met	Features		Each
Nylon	Back (1)	50	Aramid Fabric	Braided	310	ANSI/ASSP Z359.9, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9856N11	000000000

Rescue Poles

Image of Product. Front orientation. Retrievers.

Use rescue poles to assist a teammate who’s injured or unconscious. They come with a carabiner and a rope, so you can hook the tab on their pack, pull it, and lower them to the ground.

			Rope			Carabiner
Extended Lg., ft.	Retracted Lg., ft.	Material	Lg., ft.	Material	Construction	Opening Wd.	Material	Wt. Cap., lb.	Includes		Each
10	2	Aluminum	12	Polypropylene	Braided	13/16"	Aluminum	310	Carabiner, Carrying Case with RFID Tag, Rope	9856N12	0000000

Retrieval Travel-Limiting Lanyards

Stay straight up and down while being raised and lowered through narrow spaces. These lanyards clip into your harness’s shoulder D-rings to keep you from pitching forward. Grab onto the bar so your arms won't get caught on anything as you pass through manholes and other openings.

Not for use as fall-arrest equipment alone. Add them to a complete fall-arrest system, which includes a lanyard, harness, and anchor.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Opening Size	Wt. Cap., lb.	Specs. Met		Each
2 Harness End Connections



		2 1/2	Polyester Plastic	Webbing	Snap Hook	Steel	D-Ring	Steel	7/8"	420	ANSI/ASSP Z117.1, ANSI/ASSP Z359.4, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9532N121	000000

Travel-Limiting Belts

2 D-Rings

Stay away from fall hazards. When anchored by a tethering lanyard, these belts limit your movement to keep you within safe working areas. They’re also known as travel restraint belts. Padding along the back adds support and reduces strain.

You will need a tethering lanyard, belt, and fall-arrest anchor for a complete fall-prevention system. Not for use as fall-arrest equipment.

Hips—Belts with D-rings on the hips are often used for work positioning.

D-Ring Location (No. of)	Material	Construction	D-Ring Material	Buckle Material	Wt. Cap., lb.	Specs. Met	Features	Choose a Size (Waist)		Each
Hips (2)	Polyester Plastic	Webbing	Steel	Steel	310	OSHA Compliant 29 CFR 1910.140, ANSI/ASSP A10.32	Padded Back	S (32" to 40") , M (36" to 44") , L (40" to 48") , XL (44" to 52")	7920T54	000000

D-Ring Fall-Arrest Extension Straps


	D-Ring × Snap Hook Webbing

Add length to your harness D-ring and make it easier to attach a fall-arrest lanyard.

Snap-Hook Connection—Snap hooks are easy to clip to your existing D-ring.

Impact-Indicating Stitching—Straps with impact-indicating stitching let you know at a glance if the strap has been weakened in a fall. The stitching pops or tears during an impact.

	Specs. Met	Features		Each
D-Ring × Snap Hook







	Webbing

	18"	Polyester Plastic	310	OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	1003N2	000000


	36"	Polyester Plastic	310	OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.3	Impact-Indicating Stitching	1003N115	00000

Fall-Arrest Harnesses with Lanyards


		Quick-Stop Lanyard	Shock-Absorbing Lanyard

Belt Thigh Buckle

Stay ready for occasional work at height—these harnesses come with a lanyard. Store them in the included bag when not in use. When they’re used properly with an anchor (not included with all), they help you meet OSHA and ANSI safety standards.

Attach the lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall.

Impact-Indicating Stitching—Impact-indicating stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.

Quick Stop—Quick-stop lanyards, also known as SRLs, lock into place quickly to stop your fall in a shorter distance than shock-absorbing lanyards. The lanyard extends and retracts as you change position, giving you freedom to move while keeping the lanyard out of the way.

Shock Absorbing—Shock-absorbing lanyards are a good basic option. They have webbing that expands if you fall to reduce the impact on your body. They’re more lightweight than quick-stop lanyards.

		Lanyard										Anchor End Connection
	Performance	Lg., ft.	Lg. After Fall, ft.	Material	Construction	Harness Size	For Ht. Range	For Wt., lb.	Waist Size	Harness Material	D-Ring Location (No. of)	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met	Includes		Each
Front-Buckle Harnesses—Belt Thigh Buckle







				Impact-Indicating Stitching, Leg Support Handles

				Quick Stop	11	—	Polyester Fabric	Webbing	One Size	58" to 78"	110 to 320	32" to 50"	Polyester Plastic	Back (1)	Snap Hook	Steel	2"	310	ANSI/ASSP Z359.11, ANSI/ASSP Z359.14 Class 1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Lanyard, Storage Bag, Webbing Anchor Point	9291N12	0000000


				Shock Absorbing	6	10	Polyester Fabric	Webbing	One Size	58" to 78"	110 to 320	32" to 50"	Polyester Plastic	Back (1)	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.11, ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Lanyard, Storage Bag	9291N11	000000

Quick-Stop Retracting Fall-Arrest Lanyards with Anchor


Hook Over	Wraparound


Hook-Over Anchor Point 1 Anchor End Connection	Hook-Over Anchor Point, 2 Anchor End Connections	Wraparound Anchor Point, 1 Anchor End Connection	Wraparound Anchor Point, 2 Anchor End Connections

Clip these lanyards onto a rated structure—they form their own anchor. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when the anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards. Use them when the anchor is above, level with, or up to 5 ft. below your D-ring. Since they're made with Kevlar webbing or wire rope, they meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

Hook-Over Anchor Point—Hook-over lanyards have a large snap hook, known as a rebar hook, that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach the new anchor point before disconnecting the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards hold up to abrasion better than webbing lanyards for a longer lifespan.

Anchored Housing—Lanyards with an anchored housing are easier on your back than other retracting lanyards, since the weight of the housing hangs on the anchor rather than your harness’s D-ring.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1—Hook Over







				1 Anchor End Connection

				6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T111	0000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T112	000000


						Class 1—Wraparound







										1 Anchor End Connection

										9	UHMW Polyethylene	Webbing	Carabiner with Swivel Eye	Steel	Snap Hook	Steel	2"	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	8091T884	000000


										Class 2—Hook Over







														1 Anchor End Connection

														8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T211	000000




																2 Anchor End Connections

																8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T212	000000


																Class 2—Wraparound







																				1 Anchor End Connection

																				8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T213	000000




																				2 Anchor End Connections

		8																		Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T214	000000