Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant.

With a top that overhangs the cover, this raceway keeps out rain. It is rated NEMA 3R for protection from liquids and light splashing.

Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.

Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.

With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference.

Route wire and cable around curves with this bendable wire duct.

Narrower slots and fingers create more access and routing points than on standard slotted wire duct.

Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees.

Create a system to route cable and hose by connecting components such as straight trays and tees.

A built-in faucet allows easy draining.

Freeze these pans prior to use and the internal gel will keep contents below 40° F for eight hours.

To keep items from sliding off, these pans have a molded-in, slip-resistant rubber surface. Often used in cafeterias and food-processing areas, they meet NSF/ANSI 2 standards for food equipment.

These lightweight pans have reinforced metal corners for durability and a coating that resists moisture, grease, and mild acids.

These durable plastic pans are impact, wear, chemical, stain, and stick resistant.

An aluminized finish makes these pans corrosion resistant.

With spill capacities up to 170 gallons, these tubs hold 55-gallon drums.

These pallets have removable grating for easy cleaning.

A flexible alternative to spill-control pallets, these trays collapse when not in use for easy storage and have spill capacities up to 60 gallons.

Prevent slipping hazards by surrounding equipment that might leak or create condensation.

Tubs are made of galvanized steel for corrosion resistance.

Use these containers in food-processing facilities.

Let gravity move your material from one area to another by connecting these chutes to conveyors and other machinery.

Reduce noise caused by HVAC systems. These sturdy rubber supports isolate vibration caused by heat pumps and air conditioning units, resulting in a quieter facility. When used on roofs, they also keep components above puddled water, which can cause damage.

Avoid trips up and down step ladders to get tools and supplies—mount these trays to top steps that are 13 1/2" to 14" wide and 6" to 6 1/2" deep to keep items securely within reach.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Often called architectural bronze, 385 brass is easy to machine and has excellent formability when heated. It is typically used for handrails, ornamental trim, and hardware, such as hinges and lock bodies.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

With a durable one-piece construction, these boxes have no seams or welds to crack and leak.

For use with most jobs, these trays fit paint rollers of all types and sizes.

These compact trays fit paint rollers and pads up to 7" long, as well as brushes, so you can bring them with you while painting trim, corners, and tight spaces.

Create continuous runs of channel without corners.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

This welded, one-piece strut channel combines two strut channels side-to-side.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Push these nuts into place rather than threading them onto a fastener.

Connect two channels to create a stacked channel.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Keep a rod securely centered against the strut channel.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Notches on these washers grip the channel to keep them in place.