Use these latches alone for single-point latching, or add latch kits for more holding power.

Choose these keyed alike locks when you need several that open with the same key.

Choose these L-handle locks if you need several that open with the same key.

Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.

These latches are typically used to secure hoods and covers.

Mount these latches on a corner to draw perpendicular surfaces together.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

The latch arm is coated with vinyl so it won't scratch surfaces.

A safety catch prevents accidental opening.

Each latch comes with a variety of strike plates for different mounting options.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

Use these L-handle latches to draw lightweight surfaces together.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.

Add a padlock to secure these latches, which reach around corners to pull two surfaces together.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Adjust the latching distance to compensate for gasketing and misalignment.

Lift and turn the handle 180° to open and close this lock.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.

Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.

Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.

Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.

Choose these hasps if you need hasps that each open with a different key.

Choose these cylinders if you need cylinders that each open with a different key.