McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    24 Products

    Hydraulic Jacks with Wheels

    Image of Product. Front orientation. Jacks. Hydraulic Jacks with Wheels, Bracket Saddle.
    Image of Product. Front orientation. Jacks. Hydraulic Jacks with Wheels, Flat Saddle.

    Bracket Saddle

    Flat Saddle

    Roll these jacks from job to job and under hard-to-reach places.
    Note: Jacks should not be moved when under load.
    Warning: Never use to support people or loads over people.
    Bracket Saddle—Bracket saddles provide a more secure hold and offer higher lifts than flat saddles. Designed to help mechanics perform maintenance and repair tasks on automotive transmissions, they swivel forward, backward, and side to side, to allow for easy access to all areas of your load.
    Flat Saddle—Flat saddles hold larger loads than the bracket saddles and have a longer handle for more comfortable lifting.
    Saddle
    Base
    Wheel
    Weight Capacity
    Ht.
    Max.
    Lift
    Movement
    Dia.
    Lg.
    Wd.
    Wd.
    Lg.
    Ht.
    Handle
    Lg.
    Body
    Material
    Configuration
    Material
    Each
    Bracket Saddle
    1/2 ton/1,000 lb.8 1/2" to 31 3/4"23 1/4"Swivel—7 7/8"7 1/8"19"31"6 7/8"23"SteelFour Swivel CastersSteel2906T350000000
    1 ton/2,000 lb.7 3/4" to 32 3/4"32 3/4"Swivel—9"7 7/8"20 5/8"36 1/4"12"23 5/8"SteelFour Swivel CastersSteel2906T4600000000
     
    Flat Saddle
    2 ton/4,000 lb.3 1/2" to 18 1/2"15"Rigid4 1/2"——11 3/4"25 3/4"6"45"Aluminum
    		Two Rigid Casters and Two Swivel CastersSteel2908T11000000
    3 1/2 ton/7,000 lb.5 1/8" to 21 1/2"22"Swivel4 3/8"——13 1/2"28 1/2"6 5/8"52 3/8"SteelTwo Rigid Casters and Two Swivel CastersCast Iron2908T17000000
     

    Jack Stands—Not for Lifting

    Image of Product. Front orientation. Jack Stands. Jack Stands—Not for Lifting, Style A.
    Image of Product. Front orientation. Jack Stands. Jack Stands—Not for Lifting, Style B.
    Image of Product. Front orientation. Jack Stands. Jack Stands—Not for Lifting, Style C.

    Style A

    Style B

    Style C

    After raising a load, add these steel stands for support.
    Note: Do not raise or lower stands while under load. Always use stands in pairs and on a hard, flat surface.
    Warning: Never use to support people or loads over people.
    Locking-Handle Adjustment—Locking handles lock the ratchet bar in place to support the load.
    Locking-Pin Adjustment—Locking pins are inserted through the riser to lock the bar in place.
    Saddle
    Base
    Style
    Wt. Cap.
    per Pair
    Ht.
    Ht. Adjustment
    Increments
    Lg.
    Wd.
    Dia.
    Lg.
    Wd.
    Pair
    Locking-Handle Adjustment
    A6 ton/12,000 lb.12" to 17 3/4"9/16"1"3 1/2"—7 1/2"8 1/4"8059T310000000
    A12 ton/24,000 lb.15 5/8" to 23 3/4"11/16"1 1/4"4 1/4"—10 3/8"11 5/8"8059T32000000
     
    Locking-Pin Adjustment
    B12 ton/24,000 lb.19" to 29 1/2"1 1/2"3"6"15 7/8"——8059T33000000
    C44 ton/88,000 lb.13 7/8" to 19 7/8"3"3"3 3/4"—11"11"8059T35000000
     

    Screw Jack Stands

    Hold and adjust the height of heavy loads such as truck trailers. The screw adjustment lets you make small changes to the height of your load.
    Note: Jack stands should not be moved when under load.
    Warning: Never use to support people or loads over people.
    Stationary
    Image of Product. Front orientation. Jack Stands. Screw Jack Stands, Stationary.
    Image of Product. Replacement Grip. Front orientation.

    Replacement Grip

    Saddle
    Wt. Cap.
    Holding Cap.
    Ht.
    Max.
    Lift
    Lg.
    Wd.
    Base
    Dia.
    Each
    2 1/2 ton/5,000 lb.25 ton/50,000 lb.44" to 51"7"5"5"14"8817T610000000
     
    Replacement Grips
    Each
    Grip for Stationary Jack Stands8817T79000000
    Rolling
    Image of Product. Front orientation. Jack Stands. Screw Jack Stands, Rolling, Two Axle-Mounted Wheels.
    Image of Product. Front orientation. Jack Stands. Screw Jack Stands, Rolling, Three Axle-Mounted Wheels.
    Image of Product. Replacement Grip. Front orientation.

    Two

    Axle-Mounted

    Wheels

    Three Axle-Mounted

    Wheels

    Replacement Grip

    Image of Product. Replacement Handle. Front orientation.
    Image of Product. Replacement Saddle. Front orientation.
    Image of Product. Replacement Wheel Kit. Front orientation.

    Replacement Handle

    Replacement Saddle

    Replacement Wheel Kit

    Image of Product. Replacement Wheel. Front orientation.

    Replacement Wheel

    Saddle
    Base
    Wt. Cap.
    Holding Cap.
    Ht.
    Max.
    Lift
    Dia.
    Lg.
    Wd.
    Lg.
    Wd.
    Handle
    Lg.
    Wheel
    Material
    Features
    Each
    Two Axle-Mounted Wheels
    20 ton/40,000 lb.50 ton/100,000 lb.39" to 51"12"8"——16"17 5/8"20"Rubber
    		Removable Handle8817T620000000
     
    Three Axle-Mounted Wheels
    20 ton/40,000 lb.50 ton/100,000 lb.40" to 51"11"—24"6"16"17 5/8"20"Rubber, SteelRemovable Handle8817T74000000
     
    Replacements for Jack Stands
    Each
    Grip for Two and Three Axle-Mounted Wheel Jack Stands8817T7800000
    Handle for Two and Three Axle-Mounted Wheel Jack Stands (Includes 1 Grip)8817T7700000
    Saddle for Two Axle-Mounted Wheel Jack Stands8817T81000000
    Steel Wheel for Three Axle-Mounted Wheel Jack Stands8817T8300000
    Rubber Wheel Kit for Two and Three Axle-Mounted Wheel Jack Stands (Includes 1 Axle, 1 Cotter Pin, 2 Wheels)8817T75000000

    Air-Powered Hydraulic Lifting Jacks with Wheels

    Image of Product. Front orientation. Jacks. Air-Powered Hydraulic Lifting Jacks with Wheels.
    Roll this jack from job to job and under hard-to-reach places. It uses air pressure to raise loads with less effort than other jacks.
    Note: Jacks should not be moved when under load.
    Warning: Never use to support people or loads over people.
    Saddle
    Base
    Air Inlet
    Weight Capacity
    Ht.
    Max.
    Lift
    Type
    Dia.
    Lg.
    Wd.
    Ht.
    Handle
    Lg.
    Air Pressure,
    psi
    Air Hose
    Lg., ft.
    Connection
    Pipe
    Size
    Gender
    Body
    Material
    Wheel
    Material
    Each
    Rigid Saddle
    22 ton/44,000 lb.9 3/4" to 19 1/4"9 1/2"Flat2"22 7/8"12 1/2"7"48 3/4"110 to 1503Quick Disconnect1/4
    		MaleSteelPlastic28975T260000000
     

    Jack Pumps

    Image of Product. Front orientation. Jack Pumps. Manual, Style 3.

    Manual

    Style 3

    Connect these pumps to a ram to create a hydraulic jack. Use hose to connect; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
    Warning: Never use to support people or loads over people.
    Style 3—Style 3 pumps are also known as trailer pumps and have a body that is taller than it is long to fit in a narrow space. Use as part of a permanent lifting system.
    Pump
    Mounting
    Style
    Working
    Orientation
    Pump Oil
    Cap., cu. in.
    No. of
    Speeds
    Lg.
    Wd.
    Ht.
    Max. Pressure,
    psi
    Pipe
    Size
    Thread
    Type
    Gender
    Pump
    Material
    Fasteners
    Included
    No. of
    Holes
    Hole
    Dia.
    Each
    Manual
    3Vertical14818"8"11 1/8"3,0003/8
    		NPTF
    		FemaleCast IronNo49/16"42985K78000000000
    3Vertical14818"8"11 1/8"6,5003/8
    		NPTF
    		FemaleCast IronNo49/16"42985K7400000000
    3Vertical14818"8"11 1/8"12,0003/8
    		NPTF
    		FemaleCast IronNo49/16"42985K7700000000
     

    Ratchet Jack Stands

    The ratcheting action of these jacks stands makes adjusting them under load easier than screw jack stands. Use them to hold and adjust the height of heavy loads such as truck trailers.
    Note: Jack stands should not be moved when under load.
    Warning: Never use to support people or loads over people.
    Rolling
    Image of Product. Front orientation. Jack Stands. Ratchet Jack Stands, Rolling, Two Axle-Mounted Wheels.
    Image of Product. Front orientation. Jack Stands. Ratchet Jack Stands, Rolling, Three Axle-Mounted Wheels.
    Image of Product. Replacement Grip. Front orientation.

    Two

    Axle-Mounted

    Wheels

    Three Axle-Mounted Wheels

    Replacement Grip

    Image of Product. Replacement Handle. Front orientation.
    Image of Product. Replacement Saddle. Front orientation.
    Image of Product. Replacement Wheel Kit. Front orientation.

    Replacement Handle

    Replacement Saddle

    Replacement Wheel Kit

    Image of Product. Replacement Wheel. Front orientation.

    Replacement Wheel

    Saddle
    Base
    Wt. Cap.
    Holding Cap.
    Ht.
    Max.
    Lift
    Dia.
    Lg.
    Wd.
    Lg.
    Wd.
    Handle
    Lg.
    Wheel
    Material
    Features
    Each
    Two Axle-Mounted Wheels
    20 ton/40,000 lb.50 ton/100,000 lb.39" to 51"12"8"——16"17 5/8"20"Rubber
    		Removable Handle8817T630000000
     
    Three Axle-Mounted Wheels
    20 ton/40,000 lb.50 ton/100,000 lb.40" to 51"11 1/2"—24"6"16"17 5/8"20"Rubber, SteelRemovable Handle8817T67000000
     
    Replacements for Jack Stands
    Each
    Grip for Two and Three Axle-Mounted Wheel Jack Stands8817T7800000
    Handle for Two and Three Axle-Mounted Wheel Jack Stands (Includes 1 Grip)8817T7700000
    Saddle for Two Axle-Mounted Wheel Jack Stands8817T82000000
    Steel Wheel for Three Axle-Mounted Wheel Jack Stands8817T8300000
    Rubber Wheel Kit for Two and Three Axle-Mounted Wheel Jack Stands (Includes 1 Axle, 1 Cotter Pin, 2 Wheels)8817T75000000
    back to top