Filter by
System of Measurement
Fitting Connection
For Use With
Tube Material
Nut Material
Maximum Pressure @ Temperature
Length
Maximum Temperature
Specifications Met
REACH
DFARS Specialty Metals
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Vibration-Resistant Compression Fittings for Stainless Steel Tubing
- For Use With: Acetylene, Air, Butane, Compressed Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Helium, Hydraulic Fluid (Petroleum Base), Kerosene, Mineral Oil, Natural Gas, Nitrogen, Propane, Soap Solutions
- Temperature Range: -10° to 400° F
- Tubing: Use with seamless 316Ti or 321 stainless steel
- Specifications Met: DIN 3861
Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps. However, rubber sleeves can’t withstand temperatures as high as metal ones. To create the strong seal, tighten the included nut. These fittings are made of 316 stainless steel, so they have excellent corrosion resistance. They’re also known as flareless fittings. All meet DIN 3861, which is an international standard for compression tube fitting specifications.
BSPP and metric male threads have a gasket to prevent leaks.
Straight Adapters, Tube × Male Threaded Pipe
Straight Adapters, Tube × Male Threaded Pipe
BSPP and Metric
Male Threads with
Gasket and Washer
Male Threads with
Gasket and Washer
For Tube | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size  | Thread Size | Thread Pitch, mm | Material | Gasket Material | Maximum Pressure | Each | |
NPT Threads | |||||||||
| 6 | 1 | 1/8 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 0000000 |
| 6 | 1 | 1/4 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
| 8 | 1 | 1/4 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 1/4 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 3/8 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | 1/4 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | 1/2 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 1/2 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 1/2 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
BSPP Threads | |||||||||
| 6 | 1 | 1/8 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 6 | 1 | 1/4 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
Metric Threads | |||||||||
| 8 | 1 | __ | M12 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | __ | M14 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
Nuts
Nut
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Nut Material | Maximum Pressure | Each | |
| 6 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 8 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 15 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 18 | 2 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
Nuts for Vibration-Resistant Compression Fittings for Stainless Steel Tubing
Nut
- For Use With: Acetylene, Air, Butane, Diesel Fuel, Compressed Air, Cutting Oil, Fuel Oil, Gasoline, Hydraulic Fluid (Petroleum Base), Kerosene, Mineral Oil, Natural Gas, Helium, Nitrogen, Propane, Soap Solutions
- Temperature Range: -10° to 400° F
- Tubing: Use with seamless 316Ti or 321 stainless steel
- Specifications Met: DIN 3861
Pair these nuts with vibration-resistant compression sleeves and fittings for a strong seal on stainless steel tubing. Made of 316 stainless steel, they have excellent corrosion resistance. All meet DIN 3861, which is an international standard for compression tube fitting specifications.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Nut Material | Sleeve Material | Maximum Pressure | Each | |
| 6 | 1 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 8 | 1 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 15 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 18 | 2 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
Nickel-Plated Brass Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Lubricants, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -75° to 550° F, except 90° elbow adapters with BSPP threads are 0° to 170° F
- Tubing: Use with copper
- Specifications Met: DIN 3861, except nuts meet DIN 3870
With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings. They have a single sleeve (ferrule) made of plain brass that gently bites into copper tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. These fittings are also known as flareless fittings. All meet DIN standards for tube fitting dimensions.
Straight Adapter, Tube × Male Threaded Pipe
Straight Adapter, Tube × Male Threaded Pipe
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size | Material | Maximum Pressure | Each | |
BSPT Threads | ||||||
| 4 | 1 | 1/8 | Nickel-Plated Brass | 1,800 psi @ 72° F | 0000000 | 00000 |
| 6 | 1 | 1/8 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 6 | 1 | 1/4 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 1/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 1/4 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 3/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 10 | 1 | 1/4 | Nickel-Plated Brass | 1,600 psi @ 72° F | 0000000 | 0000 |
| 10 | 1 | 3/8 | Nickel-Plated Brass | 1,600 psi @ 72° F | 0000000 | 0000 |
| 12 | 1 | 3/8 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 12 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 14 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 15 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 16 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 00000000 | 0000 |
| 18 | 1 | 1/2 | Nickel-Plated Brass | 900 psi @ 72° F | 00000000 | 00000 |
Straight Adapter, Tube × Female Threaded Pipe
Straight Adapter, Tube × Female Threaded Pipe
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size | Material | Maximum Pressure | Each | |
BSPP Threads | ||||||
| 4 | 1 | 1/8 | Nickel-Plated Brass | 1,800 psi @ 72° F | 00000000 | 00000 |
| 6 | 1 | 1/8 | Nickel-Plated Brass | 2,500 psi @ 72° F | 00000000 | 0000 |
| 6 | 1 | 1/4 | Nickel-Plated Brass | 2,500 psi @ 72° F | 00000000 | 0000 |
| 8 | 1 | 1/4 | Nickel-Plated Brass | 2,100 psi @ 72° F | 00000000 | 0000 |
| 8 | 1 | 3/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 00000000 | 0000 |
| 10 | 1 | 1/4 | Nickel-Plated Brass | 1,600 psi @ 72° F | 00000000 | 0000 |
| 15 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 00000000 | 0000 |
Straight Connectors, Tube
Straight Connector, Tube
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Material | Maximum Pressure | Each | |
| 4 | 1 | Nickel-Plated Brass | 1,800 psi @ 72° F | 0000000 | 00000 |
| 6 | 1 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 10 | 1 | Nickel-Plated Brass | 1,600 psi @ 72° F | 0000000 | 0000 |
| 12 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 14 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 00000 |
| 15 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 00000 |
90° Elbow Adapter, Tube × Male Threaded Pipe
90° Elbow
Adapter, Tube × Male
Threaded Pipe (BSPP)
Adapter, Tube × Male
Threaded Pipe (BSPP)
90° Elbow
Adapter, Tube × Male
Threaded Pipe (BSPT)
Adapter, Tube × Male
Threaded Pipe (BSPT)
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size | Material | Maximum Pressure | Each | |
BSPP Threads | ||||||
| 4 | 1 | 1/8 | Nickel-Plated Brass | 1,800 psi @ 72° F | 00000000 | 00000 |
| 6 | 1 | 1/8 | Nickel-Plated Brass | 2,500 psi @ 72° F | 00000000 | 0000 |
| 6 | 1 | 1/4 | Nickel-Plated Brass | 2,500 psi @ 72° F | 00000000 | 0000 |
| 8 | 1 | 1/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 00000000 | 0000 |
| 8 | 1 | 1/4 | Nickel-Plated Brass | 2,100 psi @ 72° F | 00000000 | 0000 |
| 10 | 1 | 1/4 | Nickel-Plated Brass | 1,600 psi @ 72° F | 00000000 | 0000 |
| 12 | 1 | 3/8 | Nickel-Plated Brass | 1,000 psi @ 72° F | 00000000 | 00000 |
BSPT Threads | ||||||
| 4 | 1 | 1/8 | Nickel-Plated Brass | 1,800 psi @ 72° F | 0000000 | 0000 |
| 6 | 1 | 1/8 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 6 | 1 | 1/4 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 1/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 1/4 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 14 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
90° Elbow Connectors, Tube
Inline Tee Adapters, Tube × Male Threaded Pipe
Inline Tee Adapter, Tube × Male Threaded Pipe
Inline tees are also known as branch tees.
Right-Angle Tee Adapters, Tube × Male Threaded Pipe
Right-Angle Tee Adapter, Tube × Male Threaded Pipe
Right-angle tees are also known as run tees.
Nuts
Nut
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Nut Material | Maximum Pressure | Length, mm | Each | |
Short Nuts | ||||||
| 4 | 1 | Nickel-Plated Brass | 1,800 psi @ 72° F | 11 | 00000000 | 00000 |
| 6 | 1 | Nickel-Plated Brass | 2,500 psi @ 72° F | 12 | 00000000 | 000 |
| 8 | 1 | Nickel-Plated Brass | 2,100 psi @ 72° F | 12 | 00000000 | 000 |
| 10 | 1 | Nickel-Plated Brass | 1,600 psi @ 72° F | 16 | 00000000 | 0000 |
| 12 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 16 | 00000000 | 0000 |
| 14 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 19 | 00000000 | 0000 |
| 15 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 17 | 00000000 | 0000 |
Sleeves
Sleeve
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Sleeve Material | Maximum Pressure | Each | |
| 4 | 1 | Brass | 1,800 psi @ 72° F | 00000000 | 00000 |
| 6 | 1 | Brass | 2,500 psi @ 72° F | 00000000 | 000 |
| 8 | 1 | Brass | 2,100 psi @ 72° F | 00000000 | 000 |
| 10 | 1 | Brass | 1,600 psi @ 72° F | 00000000 | 000 |
| 12 | 1 | Brass | 1,000 psi @ 72° F | 00000000 | 000 |
| 14 | 1 | Brass | 1,000 psi @ 72° F | 00000000 | 000 |
| 15 | 1 | Brass | 1,000 psi @ 72° F | 00000000 | 000 |
Sleeves for Nickel-Plated Brass Compression Fittings for Copper Tubing
Sleeve
- For Use With: Air, Cutting Oil, Diesel Fuel, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Lubricants, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -75° to 550° F
- Tubing: Use with copper
- Specifications Met: DIN 3861
Use these sleeves with compression nuts and fittings to create a strong seal on copper tubing. Made of brass, they gently bite into tubing as you tighten the nut, and have good corrosion resistance. All meet DIN 3861, which is an international standard for tube fitting dimensions.
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Sleeve Material | Maximum Pressure | Each | |
| 4 | 1 | Brass | 1,800 psi @ 72° F | 00000000 | 00000 |
| 6 | 1 | Brass | 2,500 psi @ 72° F | 00000000 | 000 |
| 8 | 1 | Brass | 2,100 psi @ 72° F | 00000000 | 000 |
| 10 | 1 | Brass | 1,600 psi @ 72° F | 00000000 | 000 |
| 12 | 1 | Brass | 1,000 psi @ 72° F | 00000000 | 000 |
| 14 | 1 | Brass | 1,000 psi @ 72° F | 00000000 | 000 |
| 15 | 1 | Brass | 1,000 psi @ 72° F | 00000000 | 000 |
Vibration-Resistant Compression Fittings for Steel Tubing
Metric Male Threads with Gasket
BSPP Male
Threads with
Gasket and Washer
Threads with
Gasket and Washer
- For Use With: Cutting Oil, Diesel Fuel
- Temperature Range: -30° to 250° F
- Tubing: Use with seamless steel
- Specifications Met: DIN 3861
The sleeve (ferrule) in these fittings is made of rubber instead of metal, so it cushions the tubing and absorbs vibration while creating a tight seal. Fittings are also known as flareless fittings. They are zinc-plated steel for fair corrosion resistance.
BSPP male threads have a gasket and washer to prevent leaks.
Metric male threads have either a gasket or a gasket and washer to prevent leaks.
Straight Adapters, Tube × Male Threaded Pipe
Metric Male Threads with Gasket
BSPP Male
Threads with
Gasket and Washer
Threads with
Gasket and Washer
| For Tube OD, mm | Pipe Size | Thread Size | Thread Pitch, mm | Material | Gasket Material | Washer Material | Max. Pressure | Each | |
NPTF Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6 | 1/8 | __ | __ | Zinc-Plated Steel | __ | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
| 8 | 1/4 | __ | __ | Zinc-Plated Steel | __ | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
Metric Threads | |||||||||
| 6 | __ | M10 | 1 | Zinc-Plated Steel | Buna-N Rubber | __ | 7,200 psi @ 72° F | 0000000 | 00000 |
| 8 | __ | M12 | 1.5 | Zinc-Plated Steel | Buna-N Rubber | __ | 7,200 psi @ 72° F | 0000000 | 00000 |
| 10 | __ | M14 | 1.5 | Zinc-Plated Steel | Buna-N Rubber | __ | 7,200 psi @ 72° F | 0000000 | 00000 |
| 12 | __ | M16 | 1.5 | Zinc-Plated Steel | Buna-N Rubber | __ | 5,800 psi @ 72° F | 0000000 | 000000 |
BSPP Threads | |||||||||
| 6 | 1/8 | __ | __ | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 7,200 psi @ 72° F | 0000000 | 0000 |
| 6 | 1/4 | __ | __ | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 7,200 psi @ 72° F | 00000000 | 00000 |
| 8 | 1/4 | __ | __ | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 7,200 psi @ 72° F | 0000000 | 00000 |
| 10 | 1/4 | __ | __ | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 7,200 psi @ 72° F | 0000000 | 00000 |
| 12 | 3/8 | __ | __ | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 5,800 psi @ 72° F | 0000000 | 00000 |
Straight Adapters, Tube × Female Threaded Pipe
| For Tube OD, mm | Thread Size | Thread Pitch, mm | Material | Max. Pressure | Each | |
Metric Threads | ||||||
|---|---|---|---|---|---|---|
| 6 | M10 | 1 | Zinc-Plated Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
90° Elbow Adapters, Tube × Male Threaded Pipe
BSPP Male
Threads with
Gasket and Washer
Threads with
Gasket and Washer
| For Tube OD, mm | Pipe Size | Material | Gasket Material | Washer Material | Max. Pressure | Each | |
BSPP Threads | |||||||
|---|---|---|---|---|---|---|---|
| 6 | 1/8 | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 4,500 psi @ 72° F | 0000000 | 000000 |
| 8 | 1/4 | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 4,500 psi @ 72° F | 0000000 | 00000 |
| 10 | 1/4 | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 4,500 psi @ 72° F | 0000000 | 00000 |
| 12 | 3/8 | Zinc-Plated Steel | Buna-N Rubber | Zinc-Plated Steel | 3,600 psi @ 72° F | 0000000 | 00000 |
Nuts for Vibration-Resistant Compression Fittings for Steel Tubing
- For Use With: Cutting Oil, Diesel Fuel
- Temperature Range: -30° to 250° F
- Tubing: Use with seamless steel
- Specifications Met: DIN 3861
Use these nuts with vibration-resistant compression sleeves and fittings to create a strong seal on steel tubing. They are zinc-plated steel for fair corrosion resistance.