Ball bearings allow these fittings to rotate 360°, even after they are tightened. Fittings rotate at the pipe end and have a special seal that reduces friction to allow for continuous rotation. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting. They have good corrosion resistance.

Fittings with double-row bearing construction minimize friction for high-speed applications, such as the oscillating and rotating sections of robots. Their ball bearings are made of 440C stainless steel, so their corrosion resistance is excellent and better than that of steel bearings.

Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.

For technical drawings and 3-D models, click on a part number.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections. Fittings are nylon for excellent impact and abrasion resistance.

For technical drawings and 3-D models, click on a part number.

Fittings have a single barb that creates a smooth clamping surface for extra-tight connections that minimize leaks. Made of acetal, they won’t absorb water and lose strength, even in high-humidity environments.

For technical drawings and 3-D models, click on a part number.

Made of aluminum, these fittings are lighter in weight than other metal barbed tube fittings and have good corrosion resistance. The barb grips onto tubing, providing a secure hold with no clamp required.

Metric, BSPP, and UN/UNF (SAE Straight) male threads have a gasket or O-ring for a tight seal.

For technical drawings and 3-D models, click on a part number.

The nickel plating on these brass fittings provides extra protection against corrosive environments. The plating won’t peel or chip, so the fittings keep a bright, polished appearance. The barbs grip onto tubing, providing a secure hold with no clamp required.

Metric male threads have a fiber gasket or O-ring for a tight seal.

For technical drawings and 3-D models, click on a part number.

Color-code fittings for easy identification. Fittings are aluminum, which is lightweight with good corrosion resistance. The barb grips onto tubing, providing a secure hold with no clamp required.

Metric and UN/UNF (SAE Straight) male threads have a gasket for a tight seal.

For technical drawings and 3-D models, click on a part number.

Fittings withstand pressures up to 250 psi. They are 303 stainless steel for very good corrosion resistance.

Metric, BSPP, and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these fittings are more durable than plastic barbed tube fittings for food and beverage. They have single or multiple barbs that grip onto tubing.

Threaded connections can be taken apart for maintenance and repair.Metric and BSPP fittings have a Buna-N O-ring to ensure a strong seal. Buna-N is made of FDA listed material for use with food and beverages. These O-rings are resilient and resist tearing, animal and vegetable oil, citric acid, sodium bicarbonate, grease, and motor oil.

For technical drawings and 3-D models, click on a part number.

A smooth interior reduces friction and prevents product buildup, ensuring an unrestricted flow. Fittings have a single barb that creates a smooth clamping surface for extra-tight connections that minimize leaks. Fittings are polyethylene plastic for excellent strength.

For technical drawings and 3-D models, click on a part number.

Fittings are 316 stainless steel, which has excellent chemical resistance and is more durable than plastic. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Instead of a release ring, these fittings have a release sleeve that slides back to disconnect tubing.

Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.

For technical drawings and 3-D models, click on a part number.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections. Fittings are polypropylene, which has very good chemical resistance as well as impact and abrasion resistance.

For technical drawings and 3-D models, click on a part number.

Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.

Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance.Aluminum fittings are lighter in weight than other metal fittings. They have good corrosion resistance.

Stainless steel fittings have very good corrosion resistance. 303 stainless steel fittings won’t rust when exposed to water, making them good for areas that require frequent cleanings. Fittings with a threaded end are also known as hose nipples.

Metric, UN/UNF (SAE Straight), and BSPP male threads with gasket protect against leaks.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these fittings stand up to a wide variety of chemicals, as well as fuels, gasoline, and oils. To connect, slide the barbed end into plastic or rubber hose and secure with a clamp.

Adapters are also known as hose nipples; they adapt a barbed end to a threaded end.

Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks.

For technical drawings and 3-D models, click on a part number.

Distribute air or fluid to multiple locations from a single supply source with these manifolds. They are also known as headers. They have mounting holes, so you can mount from the top or side.

Aluminum manifolds are the industry standard for the most common types of applications. They are lighter in weight than other metal manifolds and have good corrosion resistance. Anodized aluminum manifolds have a black finish and nickel-plated aluminum manifolds have a shiny finish.

Use a plug (sold separately) to close off any unused inlets and outlets.

For technical drawings and 3-D models, click on a part number.

When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air, water, or hydraulic fluid to five locations from a single supply source. Manifolds have mounting holes, so you can mount from the top.

Anodized aluminum manifolds are the industry standard for the most common types of applications. They are lighter in weight than other metal manifolds and have good corrosion resistance. These manifolds are anodized for a black finish.

316 stainless steel manifolds have excellent corrosion resistance and can handle fuel, gasoline, coolant and other harsh substances.

Use a plug (sold separately) to close off any unused inlets and outlets.

For technical drawings and 3-D models, click on a part number.

Use these junction blocks to organize and separate multiple lines in your system. They have threaded holes that allow air, water, or hydraulic fluid to flow straight through the block. They have mounting holes, so you can mount from the side.

Anodized aluminum junction blocks are lightweight with good corrosion and wear resistance.

For technical drawings and 3-D models, click on a part number.

Fittings come in two pieces to clasp over rails, making assembly and disassembly quicker than our other framing. Use it to form temporary partitions, modular conveyors, and workstations. To assemble, clamp fittings onto the rail and tighten the included cap screw and nut. For permanent connections and added strength, fittings have a 5/32" hole to drill in an additional screw (not included).

For technical drawings and 3-D models, click on a part number.

When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.

Zinc-plated steel adapters have mild corrosion resistance. UNF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.

For technical drawings and 3-D models, click on a part number.