Run chemicals through this tubing at temperatures between -100° F and 500° F.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.

Not only can this tubing handle temperatures between -450° F and 500° F, it also has a convoluted spiral design for good flexibility and smooth flow.

Keep your work site safe and clutter free—this coiled tubing extends when you need it and retracts out of the way when you don't.

Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

An FEP liner gives this tubing better chemical resistance than any of our other firm tubing. It also provides a smooth interior for easy cleaning unrestricted flow.

This tubing can withstand high-temperature chemical applications up to 400° F.

Made from TPE plastic, this tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through.

With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push. An internal gripping ring holds the tubing tight.

A staple in labs, these couplings are highly versatile, fitting any luer lock plug, socket, syringe, or needle. They’re PVDF, so they resist most acids, alcohols, and organic solvents.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Step on this hose and it springs back to its original shape.

To minimize fluid loss when connecting and disconnecting your line, these couplings have flat faces for a close fit and shut-off valves to stop the flow—they meet ISO 16028, which is an international standard for hose couplings.

Connect to CPVC pipe fittings for use in high-temperature plumbing and water supply applications up to 170° or 200° F.

This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand acids, solvents, and other harsh substances.

Use these polypropylene flanges in outdoor environments—they resist the damaging effects of ultraviolet light. They have the chemical resistance to stand up to acids, solvents, and other harsh substances. Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are also known as Pressure Class 150 flanges.

This PTFE pipe can withstand a wider temperature range than any of our other plastic pipe for chemicals. It is commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Bolt two same-size flanges together with a gasket to create an access point within a line. Made of PTFE, they can handle a wider temperature range than any of our other plastic pipe flanges for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

These fittings have excellent corrosion resistance to handle a wide range of acids and other highly-corrosive chemicals. They are commonly used in metal surface treating applications, plating solution lines, and other chemical process applications. Reinforced with layers of fiberglass, they have better strength and durability than any of our other pipe fittings for chemicals.

The inside of this pipe won’t leach contaminants into your line or accumulate particles—it’s polished to an ultra-smooth 12 Ra finish, which also makes it easy to clean. Made of polypropylene, it resists organic solvents, acids, and alkalis better than CPVC pipe.

The inside of these flanges won’t leach contaminants into your line or accumulate particles—they’re polished to an ultra-smooth 12 Ra finish, which also makes them easy to clean. Made of polypropylene, they resist organic solvents, acids, and alkalis better than CPVC pipe flanges.

Made of PVDF that’s finished to a 12 Ra smoothness, these fittings handle some of the harshest chemicals without leaching contaminants into your line. Comparable to Kynar, they handle most organic solvents that would dissolve CPVC, and chlorine or nitric acid that would weaken polypropylene.

Use these clamps to connect easy-access CPVC pipe fittings and pipe.

Made of polypropylene, this gravity-flow pipe stands up to tough organic solvents, such as acetone, that would dissolve CPVC pipe. You can also use it for lines with highly corrosive acids, such as hydrochloric acid, and alkalies.

Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it is NSF certified for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

PETG can be formed into complex shapes without sacrificing durability.