Often used in UV purification systems, this tubing is clearer and transmits UV light better than other plastic tubing.

Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.

This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.

Made of moisture-resistant plastic, this tubing won't soften and lose strength, even in high-humidity environments.

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.

The corrugated design allows this tubing to extend and compress just like an accordion.

This tubing offers superior impact and crack resistance—even at low temperatures.

Strong, yet pliable, this tubing is good for gradual bends and can handle repeated flexing.

With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.

Made of acetal, these compression fittings are lighter in weight than metal compression fittings and won’t absorb moisture when used in wet environments.

Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.

Couplings can handle pressures up to 250 psi.

These plastic compression fittings meet NSF/ANSI Standard 51 for food contact.

Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.

Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps.

Also known as luer lock couplings, these consist of a plug and socket that connect with a half turn. Use in low-pressure applications up to 30 psi.

With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings.

These fittings include a nut with a built-in sleeve, so there’s no need to remove the nut for assembly.

A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.