Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.

This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.

Safely power seat controls, horns, and other vehicle parts with compressed air.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.

Tubing meets NSF/ANSI Standard 61 for drinking water.

This Type K tubing has the thickest walls of all our copper tubing for drinking water. It withstands pressures up to 1,900 psi.

A built-in shut-off valve stops airflow when the fittings are disconnected from tubing.

Made of nickel-plated brass, these tube fittings resist corrosion better than plain brass fittings. The male threaded ends connect to NPT, NPTF, BSPP, BSPT, and other universal threads, so you don’t have to bother matching exact thread types.

Often used in outdoor, damp, and washdown environments, these 316 stainless steel fittings will not corrode from water, salt, or chemicals. The male threaded ends mate with NPT, NPTF, BSPT, BSPP, and other universal threads, so you won’t have to worry about matching exact threads when you’re on the job.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.

Connect high-pressure brake lines with fittings that won’t crack in frigid temperatures. Often used on commercial trucks and trailers, these fittings meet Department of Transportation FMVSS 571 safety standards.

Color-code your lines by snapping these rings over the release ring on low-temperature D.O.T. push-to-connect tube fittings.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.

Made of brass, these fittings resist corrosion from water and are more durable than plastic and aluminum fittings.

Don’t get your lines crossed—use one of these couplings to quickly connect or disconnect multiple tubes at once.

Made of brass, these fittings withstand frequent washdowns in food-processing applications. They also adhere to NSF/ANSI safety standards, so they’re safe to use with food, beverages, and dairy.

Create corrosion-resistant connections in food and beverage lines with just a push. Also known as instant fittings, these fittings have an internal gripping ring and an O-ring that hold tight to tubing.

Fittings are 316 stainless steel, which has excellent chemical resistance and is more durable than plastic.

Tube supports slip inside tubing to prevent the walls from collapsing.

Create a push-to-connect junction in equipment with these fittings. To install, drill a stepped hole in your surface, push the fitting components into place, then insert your tubing.

Made of plastic, these fittings are lightweight compared to our brass push-to-connect fittings.

Vacuum insulation and a reflective barrier inside this hose maintains the temperature of liquids as cold as -325° F. Similar to a thermos, this prevents heat transfer, so the exterior of the hose won’t freeze or form condensation. The tube stems on each end slide into tube fittings on a freezer or other equipment in your plant or laboratory.