About Sleeving
More
About Heat-Shrink Tubing
More
Electrical-Insulating Tube Sleeving

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable. This sleeving is often used in motors, transformers, and generators. Made of coated fiberglass, it resists abrasion, acids, alkalies, and chemicals.
Vinyl-coated sleeving resists wax and alcohol. Sleeving is flame-rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.
ID | For Wire Gauge | For Wire Size | Wall Thick. | For Max. Voltage | Temperature Range, °F | Specifications Met | Color | 5 ft. | 10 ft. | 25 ft. | 50 ft. | |
Fiberglass Fabric with Vinyl Plastic Coating | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
0.09" | 12 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.11" | 10 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.12" | 9 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.13" | 8 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.17" | 6 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.21" | 4 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.26" | 2 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.33" | 1/0 | __ | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.39" | 1/0 | 3/8" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.45" | 1/0 | 7/16" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.51" | 1/0 | 1/2" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.64" | 1/0 | 5/8" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
0.77" | 1/0 | 3/4" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
1.02" | 1/0 | 1" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 |
High-Temperature Electrical-Insulating Tube Sleeving

This sleeving is often used to insulate connections in transformers, relays, and solenoids. It prevents electricity and heat from dissipating from wire and cable. When exposed to flame, it will self-extinguish and produce a nonconductive ash. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Made of silicone-coated fiberglass, it resists chemicals.
ID | For Wire Gauge | For Wire Size | Wall Thick. | For Max. Voltage | Temperature Range, °F | Specifications Met | Choose a Color | 5 ft. | 10 ft. | 25 ft. | 50 ft. | |
Fiberglass Fabric with Silicone Rubber Coating | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Black and White | ||||||||||||
0.09" | 12 | __ | 0.02" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.11" | 10 | __ | 0.02" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.12" | 9 | __ | 0.02" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.13" | 8 | __ | 0.02" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.17" | 6 | __ | 0.02" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.21" | 4 | __ | 0.02" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.26" | 2 | __ | 0.02" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.33" | 1/0 | __ | 0.03" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.39" | __ | 3/8" | 0.03" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.45" | __ | 7/16" | 0.03" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.51" | __ | 1/2" | 0.03" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.64" | __ | 5/8" | 0.03" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 | |||||
0.77" | __ | 3/4" | 0.03" | 7,000V AC | -65° to 390° | CSA Certified, UL 2556 VW-1, UL Recognized Component | 0000000 |
Chemical-Resistant Tube Sleeving

Made of PVC, this sleeving resists chemicals, oil, and acids. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Because this sleeving is non-expandable, it does not stretch, so it’s best for applications where you know the exact diameter of the items you need to protect.
Per Ft. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
ID | For Wire Gauge | For Wire Size | Wall Thick. | Temperature Range, °F | Specifications Met | Color | Lengths, ft. | 1-99 | 100-Up | |
PVC Plastic | ||||||||||
0.022" | 24 | __ | 0.012" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
0.027" | 22 | __ | 0.012" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.034" | 20 | __ | 0.016" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.04" | 18 | __ | 0.016" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.05" | 16 | __ | 0.016" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.07" | 14 | __ | 0.016" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.09" | 12 | __ | 0.016" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.11" | 10 | __ | 0.016" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.13" | 8 | __ | 0.02" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.17" | 6 | __ | 0.02" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.19" | 5 | __ | 0.02" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.21" | 4 | __ | 0.02" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.23" | 3 | __ | 0.02" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.25" | __ | 1/4" | 0.02" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.26" | 2 | __ | 0.02" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.29" | 1 | __ | 0.02" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.31" | __ | 5/16" | 0.025" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.33" | 1/0 | __ | 0.025" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.38" | __ | 3/8" | 0.025" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.44" | __ | 7/16" | 0.025" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.5" | __ | 1/2" | 0.025" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.56" | __ | 9/16" | 0.03" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.63" | __ | 5/8" | 0.03" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 000 | 000 | |
0.75" | __ | 3/4" | 0.035" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 0000 | 000 | |
1" | __ | 1" | 0.035" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 0000 | 0000 | |
1.5" | __ | 1 1/2" | 0.045" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 0000 | 0000 | |
2" | __ | 2" | 0.06" | 0° to 220° | UL Listed, UL 2556 VW-1 | Black | 0000000 | 0000 | 0000 |
High-Temperature Expandable Sleeving

Protect cable, hose, and pipe from abrasion and cuts in high temperature environments—this sleeving withstands temperatures over 450° F. It expands to fit over items for easy installation; sleeving then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate.
PTFE and PEEK sleeving withstand chemicals and salt water, so they can be used in extreme environments where cable and hose need protection from harsh fluids, such as in chemical plants and in oil and gas production. It has better abrasion and tear resistance than fiberglass sleeving. PTFE sleeving also withstands acids and solvents. PEEK is lighter in weight than PTFE, and more cost efficient.
Flame rated VW-1 sleeving meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Per Ft. | |||||||||
---|---|---|---|---|---|---|---|---|---|
ID | Expanded ID | Wall Thick. | Temperature Range, °F | Specifications Met | Color | Length, ft. | 1-49 | 50-Up | |
PEEK Fabric | |||||||||
1/4" | 1/2" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
1/2" | 7/8" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 0000 | |
3/4" | 1 1/8" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
1 1/4" | 1 3/4" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
1 3/4" | 2 1/2" | 1/32" | -90° to 480° | UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 |
Chemical-Resistant Wrap-Around Sleeving

Coated with PVC, this polyester sleeving resists chemicals and solvents. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Sleeving meets MIL-C-43006 for material quality. Wrap it around wire, cable, and hose without disconnecting them. It has a slit along the entire length that permanently seals with the adhesive strip.
Per Ft. | ||||||||
---|---|---|---|---|---|---|---|---|
ID | Wall Thick. | Temperature Range, °F | Specifications Met | Color | Lengths, ft. | 1-24 | 25-Up | |
Polyester Plastic with PVC Plastic Coating | ||||||||
3/8" | 1/32" | -40° to 180° | UL Recognized Component, MIL-C-43006 Type II Class 1, UL 2556 VW-1 | Black | 0000000 | 000000 | 000000 | |
1/2" | 1/32" | -40° to 180° | UL Recognized Component, MIL-C-43006 Type II Class 1, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
1" | 1/32" | -40° to 180° | UL Recognized Component, MIL-C-43006 Type II Class 1, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
1 1/2" | 1/32" | -40° to 180° | UL Recognized Component, MIL-C-43006 Type II Class 1, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
2" | 1/32" | -40° to 180° | UL Recognized Component, MIL-C-43006 Type II Class 1, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 |
Interference-Shielding Wrap-Around Sleeving
Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. A sewn-in ground wire dissipates any stored charge. It provides good protection against abrasion. Wrap it around wire and cable without disconnecting them; sleeving has a slit along the entire length. Sleeving with an adhesive strip closure is permanently sealed when the adhesive is applied. Sleeving with foil shielding is for use in stationary applications. Repeated flexing will damage the foil. Polyurethane rubber sleeving provides excellent resistance to solvents, oil, and grease.
Flame rated VW-1 sleeving meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.

Per Ft. | ||||||||
---|---|---|---|---|---|---|---|---|
ID | Wall Thick. | Temperature Range, °F | Specifications Met | Color | Lengths, ft. | 1-24 | 25-Up | |
Polyurethane Rubber with Foil Shielding | ||||||||
3/8" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 000000 | 000000 | |
1/2" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
1" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
1 1/2" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 | |
2" | 1/32" | -65° to 225° | UL Recognized Component, UL 2556 VW-1 | Black | 0000000 | 00000 | 00000 |
Chemical-Resistant Heat-Shrink Tubing

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.
PVC plastic tubing is more chemical resistant than rubber. It also resists UV, so it won’t fade or discolor when exposed to sunlight. Store tubing at 70° F or lower to avoid premature shrinkage.
SAE AMS-DTL-23053/1 Class 2, 23053/2 Class 2, and 23053/13 tubing meets requirements for material quality and color.
Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | 1/2 ft. Lg. | ||||||
---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Choose a Color | Pkg. Qty. | Pkg. | |
0.05" | 0.02" | 0.02" | 1,000 V/mil | 5 | 00000000 | 00000 | |
0.06" | 0.03" | 0.02" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.13" | 0.06" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.19" | 0.09" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.25" | 0.13" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.38" | 0.19" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.5" | 0.25" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.63" | 0.31" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
0.75" | 0.38" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
1" | 0.5" | 0.04" | 1,000 V/mil | 5 | 00000000 | 0000 | |
1.5" | 0.75" | 0.04" | 1,000 V/mil | 5 | 00000000 | 00000 | |
2" | 1" | 0.05" | 1,000 V/mil | 5 | 00000000 | 00000 | |
3" | 1.5" | 0.07" | 1,000 V/mil | 5 | 00000000 | 00000 | |
4" | 2" | 0.07" | 1,000 V/mil | 3 | 00000000 | 00000 |
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Choose a Color | 5 ft. Lg. | 10 ft. Lg. | 25 ft. Lg. | 50 ft. Lg. | 100 ft. Lg. | 125 ft. Lg. | 250 ft. Lg. | |
0.05" | 0.02" | 0.02" | 1,000 V/mil | 00000000 | ||||||||
0.06" | 0.03" | 0.02" | 1,000 V/mil | 00000000 | ||||||||
0.13" | 0.06" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.19" | 0.09" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.25" | 0.13" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.38" | 0.19" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.5" | 0.25" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.63" | 0.31" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
0.75" | 0.38" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
1" | 0.5" | 0.04" | 1,000 V/mil | 00000000 | ||||||||
1.5" | 0.75" | 0.04" | 1,000 V/mil | 00000000 | ||||||||
2" | 1" | 0.05" | 1,000 V/mil | 00000000 | ||||||||
3" | 1.5" | 0.07" | 1,000 V/mil | 00000000 | ||||||||
4" | 2" | 0.07" | 1,000 V/mil | 00000000 |
Tight-Fit Chemical-Resistant Heat-Shrink Tubing


- Material: PVC Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 2,000 V/mil
- Shrink Temperature: 285° F
- Temperature Range: 0° to 210° F
- Specifications Met: UL 2556 VW-1, UL Recognized Component
Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. Made of PVC, it has excellent resistance to chemicals, oil, and acids. It also resists UV, so it won't fade or discolor when exposed to sunlight. All are flame rated VW-1, so this tubing meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
ID | 25 ft. Lg. | 100 ft. Lg. | |||||
---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | Each | ||
0.48" | 0.26" | 0.004" | White | 0000000 | 00000 | 0000000 | 000000 |
0.6" | 0.33" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
0.85" | 0.47" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
0.91" | 0.5" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
1.04" | 0.57" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
1.13" | 0.62" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
1.2" | 0.66" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
1.45" | 0.8" | 0.004" | White | 0000000 | 00000 | 0000000 | 00000 |
1.6" | 0.88" | 0.004" | White | 0000000 | 00000 | 0000000 | 00000 |
Continuous-Flex Abrasion-Resistant Heat-Shrink Tubing

- Material: Silicone Rubber
- Shrink Ratio: 1.7:1
- Dielectric Strength: 200 V/mil
- Shrink Temperature: 275° F
- Temperature Range: -55° to 390° F
- Specifications Met: UL 2556 VW-1
Often used in automated applications such as robotics, this highly flexible tubing withstands continuous motion without cracking and tearing. Made of silicone rubber, it resists abrasion and chemicals, and withstands temperatures up to 390° F. Its flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
ID | 1 ft. Lg. | 2 ft. Lg. | 5 ft. Lg. | ||||||
---|---|---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | Each | Each | |||
0.12" | 0.07" | 0.06" | Gray | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 0000000 |
0.2" | 0.11" | 0.06" | Gray | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
0.31" | 0.17" | 0.06" | Gray | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
0.39" | 0.24" | 0.06" | Gray | 0000000 | 00000 | 0000000 | 000000 | 000000 | 00 |
0.59" | 0.35" | 0.06" | Gray | 0000000 | 00000 | 0000000 | 000000 | 000000 | 00 |
Flame-Retardant Abrasion-Resistant Heat-Shrink Tubing

- Material: PVDF Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 400 V/mil
- Shrink Temperature: 305° F
- Temperature Range: -65° to 300° F
- Specifications Met: UL Recognized Component, SAE AMS-DTL-23053/18 Class 2, UL 2556 VW-1
Made of PVDF, this tubing has excellent cut and abrasion resistance. A flame-retardant additive makes it combustion resistant and minimizes the spread of flames. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Tubing meets SAE AMS-DTL-23053/18 Class 2 for material quality and color.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
ID | 1/2 ft. Lg. | 4 ft. Lg. | ||||||
---|---|---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Choose a Color | Pkg. Qty. | Pkg. | Each | ||
0.19" | 0.09" | 0.01" | Black, Clear | 5 | 0000000 | 00000 | 0000000 | 00000 |
0.25" | 0.13" | 0.01" | Black, Clear | 5 | 0000000 | 0000 | 0000000 | 0000 |
0.38" | 0.19" | 0.01" | Black, Clear | 5 | 0000000 | 0000 | 0000000 | 0000 |
0.5" | 0.25" | 0.01" | Black, Clear | 5 | 0000000 | 0000 | 0000000 | 00000 |
0.75" | 0.38" | 0.02" | Black, Clear | 5 | 0000000 | 00000 | 0000000 | 00000 |
1" | 0.5" | 0.02" | Black, Clear | 1 | 0000000 | 0000 | 0000000 | 00000 |