1 7/8" Tubing | McMaster-Carr

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications. It’s made of FDA listed materials, so it’s suitable for use with food and beverage. Free of plasticizers like DEHP, it won’t impart tastes or odors to the fluid passing through it.

PVC tubing has harder walls than polyethylene tubing and can handle higher pressures. It meets NSF/ANSI Standard 51 for food contact. Tubing is rigid and will not bend. It is clear, so you can easily monitor flow.

For technical drawings and 3-D models, click on a part number.

Clear PVC Plastic

Clear PVC Plastic Tubing

Clear

Rigid
Compatible with Socket Connect Tube Fittings
Hard (Durometer 80D)
Temperature Range: -40° to 140° F
Specifications Met: FDA Compliant 21 CFR 175.300, NSF/ANSI 51

ID	OD	Wall Thick.	Max. Pressure	Max. Vacuum	Color		1 ft.	3 ft.	6 ft.
1 7/8"	2"	1/16"	60 psi @ 72° F	28 in. of Hg @ 72° F	Clear	00000000	000000	000000	000000

Coolant Hose

Temperature Range: 0° to 210° F
Material: Buna-N Rubber
Color: Black with Green Stripe
For Clamp Type: Worm Drive

Commonly known as radiator hose, this hose is for low-pressure coolant applications.

For technical drawings and 3-D models, click on a part number.

					Per Ft.
ID	OD	Max. Pressure	Max. Continuous Lg., ft.		1-24	25-Up
1 7/8"	2 3/8"	45 psi @ 72° F	25	00000000	000000	000000

Flexible Coolant Hose

Temperature Range: -20° to 210° F
Maximum Vacuum: 28" of Hg @ 72° F
Material: Buna-N Rubber with Neoprene Rubber Cover
Color: Black with Yellow Stripe
For Clamp Type: Worm Drive

With a tighter bend radius than other coolant hose, this hose can easily twist and turn around equipment.

For technical drawings and 3-D models, click on a part number.

						Per Ft.
ID	OD	Bend Radius	Max. Pressure	Max. Continuous Lg., ft.		1-24	25-Up
1 7/8"	2 3/8"	5 5/8"	35 psi @ 72° F	25	0000000	000000	000000

High-Temperature Rigid Metal Duct Hose for Fumes

Rigid
Compatible Clamps: U-Bolt Clamps
Max. Temperature: Galvanized Steel: 750° F; Aluminum: 450° F; 304 Stainless Steel: 1500° F; 316 Stainless Steel: 1200° F

Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures. Hose is for use with smoke, welding fumes, and oil fumes.

Galvanized steel offers fair corrosion resistance.

304 stainless steel has very good corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Galvanized Steel
ID	OD	Bend Radius	Interior Surface Texture	Specifications Met		5 ft.	6 ft.	7 ft.	8 ft.	9 ft.	10 ft.	15 ft.	20 ft.	25 ft.
0.012" Material Thick.
1 7/8"	2 1/16"	7"	Ribbed	__	0000000	000000	000000	000000	000000	000000	000000	000000	000000	000000
304 Stainless Steel
0.012" Material Thick.
1 7/8"	2 1/16"	5 1/2"	Ribbed	ASTM A240	0000000	00000	00000	00000	00000	00000	000000	000000	000000	000000

Low-Carbon Steel Round Tubes

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as frames, supports, and conduit. This steel is manufactured to ASTM, SAE, or EN standards for quality and performance.

DOM (drawn over mandrel) welded tubes are stronger than ERW (electric resistance welded) tubes.Tubes that are stress relieved minimize warping during machining.

Tubes

0.188" Wall Thick.
OD	ID	Yield Strength, psi	Fabrication	Weld Method	Heat Treatable	Heat Treatment	Hardness	Specifications Met		1 ft. Lg.	3 ft. Lg.	6 ft. Lg.
2 1/4"	1 7/8"	65,000	Welded	DOM (Drawn Over Mandrel)	No	Stress Relieved	Rockwell B80 (Medium)	ASTM A513 Type 5	00000000	000000	000000	0000000

932 Bearing Bronze Tubes

Yield Strength: 18,000 psi
Hardness: Rockwell B35 (Soft)
Temper: M07
Heat Treatable: No
Specifications Met: ASTM B505

Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

1/4" Wall Thick.
OD	OD Tolerance Range	ID	ID Tolerance Range	Straightness Tolerance	Nonsparking Properties		3" Lg.	6 1/2" Lg.	13" Lg.
2 3/8"	0.034" to 0.044"	1 7/8"	-0.064" to -0.019"	.004" per inch	Nonsparking	00000000	000000	000000	0000000

Clear Scratch- and UV-Resistant Cast Acrylic Tubes

Color: Clear
Temperature Range: 0° to 150° F
Tensile Strength: 10,000-11,250 psi (Good)
Impact Strength: 0.3-0.4 ft.-lbs./in. (Poor)
Hardness: Rockwell M94-M100 (Hard)
For Use Outdoors: Yes
Specifications Met: See table

Fabricate containers, tanks, and lenses for light fixtures with these scratch- and UV-resistant cast acrylic tubes. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material stands up to outdoor use better than polycarbonate and maintains clarity over time.

For technical drawings and 3-D models, click on a part number.

3/16" Wall Thick.
OD	OD Tolerance	ID	Lengths, ft.	Specifications Met		Per Ft.
2 1/4"	-0.020" to 0.020"	1 7/8"	1, 3, 5	ASTM D5436, UL 746C, UL 94 HB	00000000	000000

Clear Impact-Resistant Polycarbonate Tubes

Color: Clear
Temperature Range: -40° to 200° F
Tensile Strength: 8,900-9,500 psi (Good)
Impact Strength: 12-18 ft.-lbs./in. (Excellent)
Hardness: Rockwell R118 (Hard)
For Use Outdoors: No

Comparable to Lexan, Hyzod, Tuffak, and Makrolon, these polycarbonate tubes are half the weight of glass and maintain excellent impact resistance across a wide temperature range. Use them to make instrument gauge covers and display racks.

For technical drawings and 3-D models, click on a part number.

Round Tubes

1/16" Wall Thick. (-0.0045" to 0.0055")
OD	OD Tolerance	ID	ID Tolerance	Specifications Met		1 ft. Lg.	2 ft. Lg.	3 ft. Lg.	4 ft. Lg.	8 ft. Lg.
2"	-0.015" to 0.015"	1 7/8"	-0.015" to 0.015"	FDA Compliant 21 CFR 177.1580, UL 94 HB	0000000	00000	000000	000000	000000	000000

Slippery UHMW Polyethylene Tubes

These impact- and wear-resistant tubes offer 360° protection from scrapes and strikes to wires, cords, and anything that can slide through them. UHMW has a low-friction surface that resists sticking and binding.

Tubes with an oversized OD also have an undersized ID for finishing to the sizes listed.

For technical drawings and 3-D models, click on a part number.

Oversized Tubes

Color: White
Temperature Range: -20° to 180° F
Tensile Strength: 4,350-5,800 psi (Poor)
Impact Strength: 16.8 ft.-lbs./in. (Excellent)
Hardness: Durometer 65D-67D (Medium)
For Use Outdoors: No
Specifications Met: ASTM D4020, FDA Compliant 21 CFR 177.1520, UL 94 HB

3/16" Wall Thick.
OD	OD Tolerance	ID	ID Tolerance	Lengths, ft.		Per Ft.
2 1/4"	Not Rated	1 7/8"	Not Rated	1, 2, 3, 4, 5	0000000	000000

Economical Electrical-Insulating Garolite XX Tubes

Color: Brown
Max. Temperature: 265° F
Tensile Strength: 8,000-23,900 psi (Excellent)
Impact Strength: 0.35-0.55 ft.-lbs./in. (Poor)
Hardness: Rockwell M100 (Extra Hard)
For Use Outdoors: No
Specifications Met: MIL-I-24768/11

Offering greater strength and better electrical-insulating properties than Garolite CE tubes, these Garolite XX tubes are often fabricated into low-cost electrical components. Garolite XX is constructed of a phenolic resin with paper reinforcement, which makes it easy to machine. It's also known as paper-grade industrial laminate, phenolic, and Bakelite.

For technical drawings and 3-D models, click on a part number.

1/16" Wall Thick. (-0.008" to 0.008")
OD	OD Tolerance	ID	ID Tolerance	Lg.		Each
2"	-0.008" to 0.008"	1 7/8"	-0.005" to 0.005"	40"	00000000	000000

Abrasion-Resistant Sleeving

Tightly braided fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection. The interior is smooth to reduce snags during installation. It meets Mine Safety and Health Administration (MSHA) standards for fire protection in mines. Because this sleeving is non-expandable, it does not stretch, so it’s best for applications where you know the exact diameter of the items you need to protect.

Nylon sleeving is thicker than polyester sleeving, so it withstands contact with rougher surfaces. However, it can’t handle temperatures as high.

							Per Ft.
ID	Wall Thick.	Temperature Range, °F	Certification	Color	Lengths, ft.		1-99	100-Up
Nylon Fabric
1 7/8"	3/64"	-40° to 190°	MSHA Accepted	Black	10, 25, 50, 100	00000000	00000	00000

High-Strength Sleeving

This sleeving has excellent tear resistance and better abrasion resistance than standard polyester sleeving. Made of Nomex fabric, it resists most acids and alkalies, alcohol, hydraulic fluid, oil, gasoline, salt water, and solvents. It won’t irritate skin like fiberglass, so it’s easier to handle. Because this sleeving is non-expandable, it does not stretch, so it’s best for applications where you know the exact diameter of the items you need to protect.

						Per Ft.
ID	Wall Thick.	Temperature Range, °F	Color	Length, ft.		1-99	100-Up
Nomex Fabric
1 7/8"	1/16"	-320° to 400°	White	5, 10, 25, 50, 100	0000000	000000	000000

Flexible Rubber Foam Pipe Insulation

Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.

Slit tubes have an adhesive strip closure.

For technical drawings and 3-D models, click on a part number.

Slit Tubes

Slit Tube

Temperature Range: -295° to 220° F
Heat Flow Rate: 0.25 Btu @ 75° F
Density: 4.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534

1/2" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each
Buna-N/PVC Foam
1 7/8"	1 1/2	6	Flexible	2	00000000	000000
3/4" Wall Thick.
Buna-N/PVC Foam
1 7/8"	1 1/2	6	Flexible	3	00000000	00000
1" Wall Thick.
Buna-N/PVC Foam
1 7/8"	1 1/2	6	Flexible	4	00000000	00000

White Acrylic Coating (1-qt. Can)	00000000	Each	000000
Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	00000

90° Elbows

Elbow

Temperature Range: -295° to 220° F
Heat Flow Rate: 0.25 Btu @ 75° F
Density: 4.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534

3/8" Wall Thick.
ID	For Pipe Size	Flexibility	Tube Style	R Value		Each
Buna-N/PVC Foam
1 7/8"	1 1/2	Flexible	Slit	1.5	00000000	00000
1/2" Wall Thick.
Buna-N/PVC Foam
1 7/8"	1 1/2	Flexible	Slit	2	00000000	0000
3/4" Wall Thick.
Buna-N/PVC Foam
1 7/8"	1 1/2	Flexible	Slit	3	00000000	0000
1" Wall Thick.
Buna-N/PVC Foam
1 7/8"	1 1/2	Flexible	Slit	4	00000000	00000

White Acrylic Coating (1-qt. Can)	00000000	Each	000000
Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	00000

Tees

Tee

Temperature Range: -295° to 220° F
Heat Flow Rate: 0.25 Btu @ 75° F
Density: 4.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534

3/8" Wall Thick.
ID	For Pipe Size	Flexibility	Tube Style	R Value		Each
Buna-N/PVC Foam
1 7/8"	1 1/2	Flexible	Slit	1.5	00000000	00000
1/2" Wall Thick.
Buna-N/PVC Foam
1 7/8"	1 1/2	Flexible	Slit	2	00000000	0000
3/4" Wall Thick.
Buna-N/PVC Foam
1 7/8"	1 1/2	Flexible	Slit	3	000000000	00000

White Acrylic Coating (1-qt. Can)	00000000	Each	000000
Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	00000

Tear-Resistant Silicone Foam Pipe Insulation

Temperature Range: -65° to 500° F
Heat Flow Rate: 0.39 Btu @ 75° F
Density: 45 lbs./cu. ft.
Color: Black

Even at high temperatures, these tubes remain flexible to stretch over components without tearing. They restrict absorption of water, air, and gas and are typically used on hot and cold water lines and electrical components.

For technical drawings and 3-D models, click on a part number.

3/8" Wall Thick.
ID	ID Tolerance Range	For Pipe Size	Lg., ft.	R Value	Flexibility		Each
1 7/8"	-0.4" to 0.4"	1 1/2	6	1	Flexible	00000000	0000000

Economical Flexible Polyethylene Foam Pipe Insulation

Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.

For technical drawings and 3-D models, click on a part number.

90° Elbows

Elbow

Temperature Range: -330° to 210° F
Heat Flow Rate: 0.245 Btu @ 75° F
Density: 1.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM C1427 Type I, ASTM E84 25/50 for Flame and Smoke

				3/8" Wall Thick.			1/2" Wall Thick.
ID	For Pipe Size	Flexibility	Tube Style	R Value		Each	R Value		Each
1 7/8"	1 1/2	Flexible	Slit	1.5	0000000	00000	2	0000000	00000

Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	000000
White Acrylic Coating (1-qt. Can)	00000000	Each	00000

Tees

Tee

Temperature Range: -330° to 210° F
Heat Flow Rate: 0.245 Btu @ 75° F
Density: 1.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM C1427 Type I, ASTM E84 25/50 for Flame and Smoke

				1/2" Wall Thick.
ID	For Pipe Size	Flexibility	Tube Style	R Value		Each
1 7/8"	1 1/2	Flexible	Slit	2	0000000	00000

Contact Adhesive (16-fl. oz. Brush-Top Can)	00000000	Each	000000
White Acrylic Coating (1-qt. Can)	00000000	Each	00000

Mineral Wool Pipe Insulation

These insulation tubes and sheets meet ASTM E84 standards for flame and smoke. They are typically used in process piping and mechanical systems and perform best at temperatures up to 600° F. To use outdoors, add metal jacketing.

For technical drawings and 3-D models, click on a part number.

Tubes

Temperature Range: 0° to 1200° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 8 lbs./cu. ft.
Color: Yellow
Specifications Met: See table

1" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	Specifications Met	R Value		Each
1 7/8"	1 1/2	3 1/4	Rigid	ASTM E84 0/0 for Flame and Smoke, ASTM C547	4.3	00000000	000000
1 1/2" Wall Thick.
1 7/8"	1 1/2	3 1/4	Rigid	ASTM E84 0/0 for Flame and Smoke, ASTM C547	6.5	00000000	00000
2" Wall Thick.
1 7/8"	1 1/2	3 1/4	Rigid	ASTM E84 0/0 for Flame and Smoke, ASTM C547	8.7	00000000	00000

Fiberglass Pipe Insulation

This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.

Tubes, elbows, and tees are formed to provide the best fit on pipe and are the easiest to install. If your pipe is larger than the sizes we offer, choose a sheet/strip.

Tubes have an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal with reinforced insulation tape (sold separately).

Elbows and tees with PVC jacketing seal using reinforced HVAC tape (sold separately). Tees have a capped top and open sides. The top can be cut as needed.

For technical drawings and 3-D models, click on a part number.

Tubes with Kraft Paper Jacketing

Tube

Temperature Range: 0° to 850° F
Jacket Temperature Range: -20° to 150° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 4.5 lbs./cu. ft.
Color: Yellow
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C547, ASTM C585

1/2" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each
1 7/8"	1 1/2	3	Rigid	2.2	0000000	00000
1" Wall Thick.
1 7/8"	1 1/2	3	Rigid	4.3	0000000	0000
1 1/2" Wall Thick.
1 7/8"	1 1/2	3	Rigid	6.5	0000000	00000
2" Wall Thick.
1 7/8"	1 1/2	3	Rigid	8.7	0000000	00000
3" Wall Thick.
1 7/8"	1 1/2	3	Rigid	13	00000000	00000

Reinforced Insulation Tape (3" × 30 ft.)

00000000

Each

000000

90° Elbows

Elbow

Temperature Range: 0° to 1000° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 5 lbs./cu. ft.
Color: Brown
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585

1" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
1 7/8"	1 1/2	Rigid	4.3	00000000	000000
1 1/2" Wall Thick.
1 7/8"	1 1/2	Rigid	6.5	00000000	00000
2" Wall Thick.
1 7/8"	1 1/2	Rigid	8.7	00000000	00000

90° Elbows with PVC Plastic Jacketing

Elbow

Temperature Range: 0° to 1000° F
Jacket Temperature Range: 0° to 150° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 6 lbs./cu. ft.
Color: Red
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

			1" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
1 7/8"	1 1/2	Rigid	4.3	00000000	000000

Reinforced HVAC Tape (3" × 30 ft.)

00000000

Each

000000

Tees

Tee

Temperature Range: 0° to 1000° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 5 lbs./cu. ft.
Color: Brown
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585

1" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
1 7/8"	1 1/2	Rigid	4.3	00000000	000000
1 1/2" Wall Thick.
1 7/8"	1 1/2	Rigid	6.5	00000000	00000
2" Wall Thick.
1 7/8"	1 1/2	Rigid	8.7	00000000	00000

Tees with PVC Plastic Jacketing

Tee

Temperature Range: 0° to 1000° F
Jacket Temperature Range: 0° to 150° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 6 lbs./cu. ft.
Color: Red
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

			1" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
1 7/8"	1 1/2	Rigid	4.3	00000000	000000

Foil, Paper

00000000

Each

000000

Lightweight Melamine Foam Pipe Insulation

Temperature Range: -40° to 350° F
Jacket Temperature Range: -40° to 240° F
Heat Flow Rate: 0.27 Btu @ 75° F
Density: 0.44 lbs./cu. ft.
Color: Gray
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems. Insulation has an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal seams with silicone sealant and join lengths with tape (both sold separately).

				1/2" Wall Thick.			1" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each	R Value		Each
Tubes with Kraft Paper Jacketing
1 7/8"	1 1/2	4	Rigid	3	000000000	000000	7.4	00000000	000000

Silicone Sealant (10.1-fl. oz. Cartridge)	0000000	Each	000000
Tape (2" × 108 ft.)	00000000	Each	00000

Clean Room Melamine Foam Pipe Insulation

Temperature Range: -40° to 350° F
Jacket Temperature Range: 0° to 140° F
Heat Flow Rate: 0.25 Btu @ 75° F
Density: 0.44 lbs./cu. ft.
Color: Gray
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems. The jacket has an adhesive strip closure. Seal seams with a silicone sealant and join lengths with tape (both sold separately).

For technical drawings and 3-D models, click on a part number.

					1" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	Environmental Rating	R Value		Each
Tubes with PVC Plastic Jacketing
1 7/8"	1 1/2	4	Rigid	Fed. Std. Class 100, ISO Class 5	7.4	00000000	000000

Silicone Sealant (10.1-fl. oz. Cartridge)	0000000	Each	000000
Tape (2" × 108 ft.)	00000000	Each	00000

Quick-Install Fiberglass Pipe Insulation

Hook-and-loop fasteners make it easy to install, remove, and reuse this flexible insulation. Use on steam, hot water, and process pipes and fittings.

For technical drawings and 3-D models, click on a part number.

Tubes

Tube

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

				3/8" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each
1 7/8"	1 1/2	25	Flexible	1.7	00000000	0000000

Tees

Tee

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

			3/8" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
1 7/8"	1 1/2	Flexible	1.7	000000000	000000

45° Elbows

45° Elbow

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

			3/8" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
1 7/8"	1 1/2	Flexible	1.7	000000000	000000

90° Elbows

90° Elbow

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

			3/8" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
1 7/8"	1 1/2	Flexible	1.7	000000000	000000

Unions

Union

Temperature Range: -50° to 500° F
Heat Flow Rate: 0.24 Btu @ 75° F
Density: 10.5 lbs./cu. ft.
Color: Gray
Specifications Met: ASTM E84 0/0 for Flame and Smoke

			3/8" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each
1 7/8"	1 1/2	Flexible	1.7	000000000	000000

Chemical-Resistant Cellular Glass Pipe Insulation

Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines. Insulation is flame resistant, meeting ASTM E84 0/0 for flame and smoke. Seal with tape (sold separately). Outdoor and underground use require metal jacketing (sold separately).

Tubes have a kraft paper jacket with an adhesive strip for sealing.

For technical drawings and 3-D models, click on a part number.

Tubes with Kraft Paper Jacketing

Tube

Temperature Range: -450° to 900° F
Jacket Temperature Range: -40° to 240° F
Heat Flow Rate: 0.29 Btu @ 75° F
Density: 7.5 lbs./cu. ft.
Color: Black
Jacket Color: White
Specifications Met: ASTM C522 Grade 6, ASTM E84 0/0 for Flame and Smoke

				1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each	R Value		Each
1 7/8"	1 1/2	2	Rigid	3.4	0000000	000000	6.9	0000000	000000

Underground Jacketing (24" × 5 ft.)	000000000	Each	000000
Joint Sealing Tape (4" × 10 ft.)	000000000	Each	00000

90° Elbows

Elbow

Temperature Range: -450° to 900° F
Heat Flow Rate: 0.29 Btu @ 75° F
Density: 7.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM C522 Grade 6, ASTM E84 0/0 for Flame and Smoke

				1" Wall Thick.
ID	For Pipe Size	Flexibility	Choose a Pipe Fitting Connection Type	R Value		Each
1 7/8"	1 1/2	Rigid	Socket Weld, Threaded	3.4	0000000	000000

Underground Jacketing (24" × 5 ft.)	000000000	Each	000000
Joint Sealing Tape (4" × 10 ft.)	000000000	Each	00000

Tees

Tee

Temperature Range: -450° to 900° F
Heat Flow Rate: 0.29 Btu @ 75° F
Density: 7.5 lbs./cu. ft.
Color: Black
Specifications Met: ASTM C522 Grade 6, ASTM E84 0/0 for Flame and Smoke

				1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Flexibility	Choose a Pipe Fitting Connection Type	R Value		Each	R Value		Each
1 7/8"	1 1/2	Rigid	Socket Weld, Threaded	3.4	00000000	000000	__	000000	00
1 7/8"	1 1/2	Rigid	Threaded	__	000000	00	6.9	00000000	0000000

Underground Jacketing (24" × 5 ft.)	000000000	Each	000000
Joint Sealing Tape (4" × 10 ft.)	000000000	Each	00000

Ultra-Insulating Low-Temperature Polyisocyanurate Foam Pipe Insulation

This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F. To use outdoors, add metal jacketing.

Tubes have a kraft paper all-service jacket (ASJ) that resists mold and mildew by allowing moisture to evaporate. They have an adhesive strip closure.

For technical drawings and 3-D models, click on a part number.

Tubes with Kraft Paper Jacketing

Tube

Temperature Range: -295° to 300° F
Jacket Temperature Range: -40° to 240° F
Heat Flow Rate: 0.17 Btu @ 75° F
Density: 2 lbs./cu. ft.
Color: Green
Jacket Color: White
Specifications Met: ASTM E84 25/50 for Flame and Smoke

				1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Lg., ft.	Flexibility	R Value		Each	R Value		Each
1 7/8"	1 1/2	3	Rigid	5.9	0000000	000000	11.8	00000000	000000

90° Elbows

Elbow

Temperature Range: -295° to 300° F
Heat Flow Rate: 0.17 Btu @ 75° F
Density: 2 lbs./cu. ft.
Color: Green
Specifications Met: ASTM E84 25/50 for Flame and Smoke

			1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each	R Value		Each
1 7/8"	1 1/2	Rigid	5.9	0000000	000000	11.8	00000000	000000

Tees

Tee

Temperature Range: -295° to 300° F
Heat Flow Rate: 0.17 Btu @ 75° F
Density: 2 lbs./cu. ft.
Color: Green
Specifications Met: ASTM E84 25/50 for Flame and Smoke

			1" Wall Thick.			2" Wall Thick.
ID	For Pipe Size	Flexibility	R Value		Each	R Value		Each
1 7/8"	1 1/2	Rigid	5.9	0000000	000000	11.8	00000000	000000

Oil-Resistant Buna-N Gaskets for John Perry Gasket Fittings

Create a tight seal when connecting John Perry fittings. Made of Buna-N rubber, these gaskets resist oil and water. They’re FDA compliant for direct contact with food and are often used in food and dairy plants. These gaskets have an extremely smooth interior, so they’re easy to clean and there’s little room for bacteria to grow.

For technical drawings and 3-D models, click on a part number.

For Tube OD	ID	OD	Thickness	Temperature Range, °F	Color	Specifications Met		Each
2"	1.875"	2.190"	0.305"	-30° to 200°	Black	3-A Certified 20-27, FDA Compliant 21 CFR 177.2600	0000000	00000

Ultra-Chemical Resistant PTFE Gaskets for Swedish Dairy Gasket Fittings

Create a tight seal when connecting Swedish Milk Standard (SMS) fittings. In addition to dairy applications, these gaskets are used in food and pharmaceutical plants. Made of PTFE, they have excellent resistance to detergents, hydraulic fluid, and salt and good resistance against most acids and alkalis. They withstand both high and low temperatures. With an extremely smooth interior surface, these gaskets contain no small holes where bacteria could grow. They’re slippery to prevent sticking and flexible to form a tight, flush surface even under high loads.

Gaskets are FDA compliant for direct contact with food, and meet USP Class VI standards for plastics that won’t leach into liquid. They’re made without animal-derived ingredients, so there’s no risk of outside animal products contaminating your system. All meet DIN 11851 and SMS 1149 dimensional standards.

For technical drawings and 3-D models, click on a part number.

For Tube OD	ID	OD	Thickness	Maximum Pressure, psi	Temperature Range, °F	Color	Specifications Met		Each
2"	1.875"	2.375"	0.1875"	800	-340° to 500°	Blue	DIN 11851, FDA Compliant 21 CFR 177.1550, SMS 1149, USP Class VI	0000000	000000